1、AMSC N/A FSC 6150 INCH-POUND MIL-DTL-52286/21A 18 May 2010 SUPERSEDING MIL-C-52286/21 4 May 1970 DETAIL SPECIFICATION SHEET CABLE ASSEMBLY, POWER, ELECTRICAL, ADAPTER Inactive for new design after 9 December 2003. This specification is approved for use by all Departments and Agencies of the Departme
2、nt of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-52286, “Cable Assemblies, Power, Electrical (with Molded on Terminations)“. FIGURE 1. Adapter, cable assembly, three-way. Provided by IHSNot for ResaleNo reproduction or n
3、etworking permitted without license from IHS-,-,-MIL-DTL-52286/21A 2 REQUIREMENTS: Dimensions and configurations shall be in accordance with figure 1 and the MIL-DTL-52286 figure as specified. Adapter A shall be in accordance with figure 45 of MIL-DTL-52286. Minimum bond between connectors: 150 poun
4、ds. CHANGES FROM PREVIOUS ISSUE. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing Activity: Army - CR4 DLA - GS DLA - GS8 (Project 6150-2010-009) Review Activity: Army - AT NOTE: The activi
5、ties listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
