1、AMSC N/A FSC 6150 INCH-POUND MIL-DTL-52286/6A 18 May 2010 SUPERSEDING MIL-C-52286/6 4 May 1970 DETAIL SPECIFICATION SHEET CABLE ASSEMBLY, POWER, ELECTRICAL Inactive for new design after 9 December 2003. This specification is approved for use by all Departments and Agencies of the Department of Defen
2、se. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-52286, “Cable Assemblies, Power, Electrical (with Molded on Terminations)“. FIGURE 1. Cable assembly, power, electrical. REQUIREMENTS: Dimensions and configurations shall be in accor
3、dance with figure 1 and the MIL-DTL-52286 figures as specified. Connector A shall be in accordance with figure 11 of MIL-DTL-52286. Connector B shall be in accordance with figure 13 of MIL-DTL-52286. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MI
4、L-DTL-52286/6A 2 Cable C shall consist of CO-02 HLF (2/8) 0810. Minimum bond between connectors and cables: 300 pounds. CHANGES FROM PREVIOUS ISSUE. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: P
5、reparing Activity: Army - CR4 DLA - GS DLA - GS8 (Project 6150-2010-006) Review Activity: Army - AT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
