1、AMSC N/A FSC 5920 INCH-POUND MIL-DTL-83413/1D 19 May 2010 SUPERSEDING MIL-DTL-83413/1C 31 March 2005 DETAIL SPECIFICATION SHEET CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING: TYPE I GROUNDING ASSEMBLY, DISCHARGER, ELECTROSTATIC This specification is approved for use by all Departments an
2、d Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-83413. NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. FIGURE 1. Type I grounding assembly. Pro
3、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83413/1D 2 REQUIREMENTS Design and configuration: See figure 1. Grounding plug: In accordance with MIL-DTL-83413/4. Grounding cap: In accordance with MIL-DTL-83413/10. Grounding wire: 7 x 7 wire in
4、 accordance with MIL-DTL-83420, type II, composition B, jacket color translucent (see PIN example) or international orange in accordance with FED-STD-595/22510. Grounding clamp: In accordance with MIL-DTL-83413/7. Sleeves: Shall be manufactured from SAE-AS20659 terminals. Warning streamers: Shall be
5、 in accordance with NAS1756, and shall be attached securely near the plug. See figure 1. Splices shall not be used. Assembly resistance: Resistance of the grounding assembly shall not exceed 6.0 ohms. Part or Identifying Number (PIN) example: M83413 /1 - 40 T Basic specification Specification sheet
6、Wire length (feet) (see dimension A) Optional Jacket color (T = Translucent, if no letter = international orange) Wire length shall be 10, 20, 30, or 40 feet 1 foot. QUALIFICATION Qualification is not required for this specification sheet. First article inspection shall be a visual and mechanical in
7、spection in accordance with MIL-DTL-83413. Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccur
8、acies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Provided by IHSNot for ResaleNo reproduction or networking permitted without l
9、icense from IHS-,-,-MIL-DTL-83413/1D 3 Referenced documents. In addition to MIL-DTL-83413, this document references the following: MIL-DTL-83413/4 FED-STD-595/22510 MIL-DTL-83413/7 NAS1756 MIL-DTL-83413/10 SAE-AS20659 MIL-DTL-83420 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AV DLA -
10、CC Navy - AS Air Force 85 (Project 5920-2010-008) DLA - CC Review activities: Army - AR, CR, CR4, MI Navy - MC Air Force - 02, 13, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organization and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
