1、 AMSC N/A FSC 5935 DETAIL SPECIFICATION SHEET CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING: RECEPTACLES, ONE PIECE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consi
2、st of this specification sheet and MIL-DTL-83413. NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Unless otherwise specified, tolerance is .016 (.41mm) for decimals and 0.5o for angles. 4. Where only maximum dimensions are shown, the receptacle need not h
3、ave the shape shown, but the receptacle including all protrusions shall be contained within maximum outline shown. FIGURE 1. Grounding receptacle, one-piece. Inches mm Inches mm .001 0.03 .375 9.53 .002 0.05 .490 12.45 .005 0.13 .750 19.05 .016 0.41 .820 20.83 .251 6.38 1.00 25.40 .312 7.92 INCH - P
4、OUNDMIL-DTL-83413/5C 04 September 2013 SUPERSEDING MIL-DTL-83413/5B w/AMENDMENT 1 28 January 2013 Inactive for new design after 01 January 1984. For new design use MIL-DTL-83413/6. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83413/5C 2 RE
5、QUIREMENTS: Dimensions and configuration: See figure 1. Material: Sleeve: Brass in accordance with ASTM-B36/B36M. Contact: Phosphor bronze in accordance with ASTM-B139/B139M. Finish: Cadmium plate in accordance with SAE-AMS-QQ-P-416, type II, class 2, or aluminum coating or plating, or zink/ clear p
6、lated in accordance with ASTM B633, or Nickel Plated in accordance with ASTM B733. Threads: In accordance with FED-STD-H28. Detent action: Shall be provided for the mating plug. Torque: (test for Qualification Inspection Only) In addition to meeting the requirements of MIL-DTL-83413, the receptacle
7、shall be held fixed while the sleeve is subjected to 20 inch-pounds of torque. The sleeve shall not turn-in, or break loose from the contact, nor shall the contact be deformed. Durability: In accordance with MIL-DTL-83413, except that the withdrawal force required to clear the detent shall be no les
8、s than 8 pounds nor more than 14 pounds. Contact resistance: Test current 10 1 ampere, millivolts drop 50 maximum. Altitude-low temperature: Not applicable. Fluid immersion: Not applicable. Mating plug: In accordance with MIL-DTL-83413/4. QUALIFICATION: Qualification is not required for this specifi
9、cation sheet. First article inspection shall be a visual and mechanical inspection in accordance with MIL-DTL-83413. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83413/5C 3 Part or Identifying Number (PIN): M83413/5-1. Example of PIN: M834
10、13/5-1 M 83413/ 5 -1 Dash number Specification sheet number General specification Prefix Certain provisions of this specification sheet are the subject of International Standardization Agreement NATO STANAG 3632. When amendment, revision or cancellation of this specification sheet is proposed that w
11、ill modify the international agreement concerned, the preparing activity will take appropriate action through international agreement standardization channels, including departmental standardization offices to change the agreement or make other appropriate accommodations. Amendment notations. The ma
12、rgins of this specification are marked with vertical lines to indicate modifications generated by this amendment. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requ
13、irements of this document based on the entire content irrespective of the marginal notations. Referenced documents. In addition to MIL-DTL-83413, this document references the following: MIL-DTL-83413/4 MIL-DTL-83413/6 FED-STD-H28 SAE-AMS-QQ-P-416 ASTM-B139/B139M ASTM-B36/B36M ASTM B633 ASTM B733 NAT
14、O STANAG 3632 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83413/5C 4 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AV DLA - CC Navy AS Air Force - 85 DLA - CC Review activities: (Project 5935-2013-191) Army - AR, CR, CR4, MI
15、Navy - MC Air Force 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
