1、 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE ADAPTER (PUSH-PULL), QUICK-DISCONNECT, SERIES III, CLASSES A, G, M, R, T, W AND Z This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements fo
2、r acquiring the product described herein shall consist of this specification sheet and MIL-DTL-83723. FIGURE 1. Receptacle, adapter, dimensions and configuration. AMSC N/A FSC 5935 INCH-POUND MIL-DTL-83723/70B 29 June 2009 SUPERSEDING MIL-C-83723/70A (USAF) 17 December 1991 Provided by IHSNot for Re
3、saleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/70B 2 Inches mm Inches mm Inches mm .010 .25 .060 1.52 .320 8.13 .025 .64 .065 1.65 .410 10.41 .035 .89 .288 7.32 .442 11.23 .040 1.02 .292 7.42 Shell size A UNEF-2B coupling thread B dia C dia D dia E F dia 8 .56
4、25-24 .607 (15.42) .603 (15.32) .579 (14.71) .575 (14.61) .689 (17.50) .685 (17.40) .036 (0.91) .031 (0.79) .525 (13.34) 10 .6875-24 .732 (18.59) .728 (18.49) .714 (18.14) .710 (18.03) .814 (20.68) .810 (20.57) .036 (0.91) .031 (0.79) .650 (16.51) 12 .875-20 .919 (23.34) .915 (23.24) .894 (22.71) .8
5、90 (22.61) 1.001 (25.43) .997 (25.32) .036 (0.91) .031 (0.79) .840 (21.34) 14 .9375-20 .982 (24.94) .978 (24.84) .954 (24.23) .950 (24.13) 1.064 (27.03) 1.060 (26.92) .036 (0.91) .031 (0.79) .900 (22.86) 16 1.0625-18 1.107 (28.12) 1.103 (28.02) 1.079 (27.41) 1.075 (27.31) 1.189 (30.20) 1.185 (30.10)
6、 .036 (0.91) .031 (0.79) 1.025 (26.04) 18 1.1875-18 1.232 (31.29) 1.228 (31.19) 1.204 (30.58) 1.200 (30.48) 1.330 (33.78) 1.326 (33.68) .044 (1.12) .039 (0.99) 1.150 (29.21) 20 1.3125-18 1.357 (34.47) 1.353 (34.37) 1.329 (33.76) 1.325 (33.66) 1.455 (36.96) 1.451 (36.86) .044 (1.12) .039 (0.99) 1.275
7、 (32.39) 22 1.4375-18 1.482 (37.64) 1.478 (37.54) 1.454 (36.93) 1.450 (36.83) 1.580 (40.13) 1.576 (40.03) .044 (1.12) .039 (0.99) 1.400 (35.56) 24 1.5625-18 1.607 (40.82) 1.603 (40.72) 1.579 (40.11) 1.575 (40.01) 1.705 (43.31) 1.701 (43.21) .044 (1.12) .039 (0.99) 1.525 (38.74) NOTES: 1. Dimensions
8、are in inches. Dimensions apply after plating. 2. Metric equivalents are given for information only. Metric equivalents are in parentheses. 3. Unless otherwise specified, tolerances shall be .005 (0.13) for three place decimal places, .01 (0.25) for two place decimal places and 1/2 for all angles. 4
9、. Coupling indicator line shall be color coded blue .025 + .010 (0.64 + 0.25) wide. FIGURE 1. Receptacle, adapter, dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/70B 3 REQUIREMENTS: Dimensions
10、and configurations: See figure 1. For insert arrangement, see MIL-STD-1554. For connector accessories, see SAE-AS85049. This adapter is intended to be used with series III threaded coupling receptacles, including MIL-DTL-83723/82, MIL-DTL-83723/83, MIL-DTL-83723/84, MIL-DTL-83723/85, MIL-DTL-83723/8
11、8, MIL-DTL-83723/89 and MIL-DTL-83723/90. This adapter shall be secured permanently to the receptacle, using a compatible thread seizing compound. The adapter and receptacle mate with applicable quick-disconnect plugs, including MIL-DTL-83723/66 through MIL-DTL-83723/69 (pin or socket). Materials: A
12、luminum alloy. Qualification: Examination of product. Coupling torque. Salt spray (corrosion). Coupling torque. Marking: Part or Identifying Number (PIN) example: M83723/ 70 W 10 Military designator Specification sheet number Class Shell size Provided by IHSNot for ResaleNo reproduction or networkin
13、g permitted without license from IHS-,-,-MIL-DTL-83723/70B 4 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-83723, this document refere
14、nces the following: MIL-STD-1554 MIL-DTL-83723/66 MIL-DTL-83723/67 MIL-DTL-83723/68 MIL-DTL-83723/69 MIL-DTL-83723/82 MIL-DTL-83723/83 MIL-DTL-83723/84 MIL-DTL-83723/85 MIL-DTL-83723/88 MIL-DTL-83723/89 MIL-DTL-83723/90 SAE-AS85049 CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA -
15、CC Navy - AS Air Force - 85 (Project 5935-2008-106) DLA - CC Review activities: Air Force 70, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
