1、 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (FLANGE MOUNT, BAYONET COUPLING, CRIMP SOCKET CONTACT), SERIES III, CLASSES A, G, M, R, T, W AND Z This specification is approved for use by all Departments and Agencies of the Department of Defense. T
2、he requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-83723. FIGURE 1. Receptacle, dimensions and configurations. AMSC N/A FSC 5935 INCH-POUND MIL-DTL-83723/71C 18 August 2009 SUPERSEDING MIL-C-83723/71B 30 June 1992 Provided by IHSNot for R
3、esaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/71C 2 Inches mm Inches mm Inches mm Inches mm .015 0.38 .092 2.34 .146 3.71 .210 5.33 .035 0.89 .096 2.44 .150 3.81 .250 6.35 .051 1.30 .114 2.90 .155 3.94 .054 1.37 .118 3.00 .169 4.29 .076 1.93 .125 3.18 .206 5
4、23 FIGURE 1. Receptacle, dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/71C 3 Shell size A C D F J K L S + .005 (0.13) - .000 8 .120 (3.05) .428 (10.87) .433 (11.00) .312 (7.92) .536 (13.61)
5、531 (13.49) .561 (14.25) .594 (15.09) .812 (20.62) .508 (12.90) 10 .120 (3.05) .530 (13.46) .535 (13.59) .388 (9.86) .659 (16.74) .654 (16.61) .696 (17.68) .719 (18.26) .937 (23.80) .636 (16.15) 12 .120 (3.05) .700 (17.78) .705 (17.91) .558 (14.17) .829 (21.06) .824 (20.93) .875 (22.23) .812 (20.62
6、) 1.031 (26.19) .806 (20.47) 14 .120 (3.05) .769 (19.53) .774 (19.66) .627 (15.93) .898 (22.81) .893 (22.68) .935 (23.75) .906 (23.01) 1.125 (28.58) .875 (22.23) 16 .120 (3.05) .869 (22.07) .901 (22.89) .772 (19.61) 1.025 (26.04) 1.020 (25.91) 1.062 (26.97) .969 (24.61) 1.250 (31.75) 1.002 (25.45) 1
7、8 .120 (3.05) 1.002 (25.45) 1.007 (25.58) .860 (21.84) 1.131 (28.73) 1.126 (28.60) 1.187 (30.15) 1.062 (26.97) 1.343 (34.11) 1.108 (28.14) 20 .120 (3.05) 1.127 (28.63) 1.132 (28.75) .985 (25.02) 1.256 (31.90) 1.251 (31.78) 1.312 (33.32) 1.156 (29.36) 1.437 (36.50) 1.233 (31.32) 22 .120 (3.05) 1.252
8、31.80) 1.257 (31.93) 1.110 (28.19) 1.381 (35.08) 1.376 (34.95) 1.437 (36.50) 1.250 (31.75) 1.562 (39.67) 1.358 (34.49) 24 .149 (3.78) 1.377 (34.98) 1.382 (35.10) 1.235 (31.37) 1.506 (38.25) 1.501 (38.13) 1.562 (39.67) 1.375 (34.93) 1.703 (43.26) 1.483 (37.67) NOTES: 1. Dimensions are in inches. 2.
9、Metric equivalents are given for information only. Metric equivalents are in parentheses. 3. Unless otherwise specified, tolerances shall be .005 (0.13) for three place decimal places, .01 (0.25) for two place decimal places and 1 for all angles. 4. Rear accessory interchangeability dimensions shall
10、 be in accordance with MIL-DTL-83723 and SAE-AS85049. 5. The centerline of indicated projection shall be located on the vertical centerline within 2. FIGURE 1. Receptacle, dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license
11、from IHS-,-,-MIL-DTL-83723/71C 4 REQUIREMENTS: Dimensions and configurations: See figure 1. For insert arrangement, see MIL-STD-1554. For connector accessories, see SAE-AS85049. This connector mates with MIL-DTL-83723/76 and MIL-DTL-83723/78. For insert arrangements, see MIL-STD-1554 and table I. TA
12、BLE I. Inserts requiring reduced diameters for lead-in chamfers on contact cavities. Shell size Insert arrangements Contact cavities 8 03 1, 2, and 3 10 06 1, 2, 3, 4, 5, 6 Marking: Part or Identifying Number (PIN): M83723/71 X (where “X” represents the dash number from figure 1), shell size, and th
13、e applicable code for finish. PIN example: M83723/ 71 W 10 55 N Military designator Specification sheet number Class Shell size Insert arrangement Polarizing position Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/71C 5 Changes from pr
14、evious issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-83723, this document references the following: MIL-DTL-83723/76 MIL-DTL-83723/78 MIL-STD-1554 SAE-AS850
15、49 CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - AS Air Force - 85 (Project 5935-2008-125) DLA - CC Review activities: Army - AR, MI Navy - EC Air Force 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
