1、AMSC N/A FSC 5935 DETAIL SPECIFICATION SHEET CONNECTORS, RACK TO PANEL, SPRING LOADED, MOUNTING ASSEMBLY This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specificatio
2、n sheet and MIL-DTL-83733. Inches mm .138 3.51 .207 3.50 .211 5.35 .343 8.71 .380 9.65 NOTES: 1. Dimensions are in inches. Metric equivalents are given for information only. 2. Assembly preload to be 25 pounds 3 pounds. 3. Material: Corrosion-resistant steel. 4. Finish: Passivated. FIGURE 1. Dimensi
3、ons and configurations. INCH-POUND MIL-DTL-83733/17A 31 January 2011 SUPERSEDING MIL-C-83733/17 (USAF) 28 July 1986 .138-32 UNC-2B .380 DIA. MAX .343 HEX 1.260 1.240 2.11 .207 DIA. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83733/17A 2 C
4、hanges from previous issue. The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contra
5、ctors are cautioned to evaluate the requirements of this document based on the entire content irrespective of marginal notations and relationship to the last previous issue. Referenced documents. This document references MIL-DTL-83733. CONCLUDING MATERIAL Custodians: Preparing activity: Air Force -
6、85 DLA CC DLA - CC (Project 5935-2010-041) Review activity: Air Force 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
