1、MIL-P-44ltD 9999906 3949869 225 MIL-P-44188D 21 September 1993 SUPERSEDING MIL-P-44188C 12 June 1991 MILITARY SPECIFICATION PARKA, COLD WEATHER, CAMOUFLAGE This specification is approved for use by all departments and agencies of the Department of Defense. 1. SCOPE * . 1.1 Scope. This specification
2、covers a nylon, three-layer laminated, waterproof, and moisture-vapor-permeable parka, a component of the Extended Cold Weather Clothing System (ECWCS). 1.2 Classification. The parka shall be one type in the following sizes as specified (see 6.2). Size X-Short Short Regular Long X-Small X Small X Me
3、dium X Large X-Large X X X X X X X X X Beneficial comments (recommendations, additions, document should be addressed to: Defense Personnel Support Center, Clothing and Textiles Directorate, Attn: DPSC-FSSD, 2800 South 20th Street, Philadelphia, PA 19101-8419, by using the Standardization Document Im
4、provement Proposal (DD Form any pertinent data which may be of use in improving this 1426) appearing at the end of this document or by letter. msc N/A FSC 8415 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Licensed by Information Handling ServicesMIL-P-44188D 9999
5、90b 1949830 T43 1-P-44188D 2. APPLICABLE DOCUMENTS 2.1 Government documents. 2.1.1 Specifications, standards, and- handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents
6、shall be those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and its supplement as cited in the solicitation (see 6.2). SPECIFICATIONS FEDERAL . A-A-5 O O 8 3 A-A-5 O 186 A-A-5 O 19 9 A-A-5 2 11 O A-A-5 5 17 6 V-F-106 V-T-285 JJ-W-155 DDD-L-20 PPP-B-
7、26 PPP-B-636 MILITARY MIL-T-3530 MIL-T-5038 MIL-F-10884 MIL-(2-21852 MIL-L-35078 MIL-C-43701 MIL-C-44187 Bag, Plastic, Folded Garment Cloth, Buckram, Woven and Non-Woven Thread, Polyester Core, Cotton- or Cloth, Plain Weave, Polyester/Cotton Fastener, Tapes, Hook and Loop, Fasteners, Slide, Interloc
8、king Thread, Polyester Webbing, Textile (Cotton, Elastic) Label: For Clothing, Equipage, and Bag, Plastic (General Purpose) Boxes, Shipping, Fiberboard Polyester-Covered Synthetic Tentage, (General Use) Thread and Twine: Mildew Resistant Tape, Textile and Webbing, Textile, Fasteners, Snap Cloth, Taf
9、feta, Nylon Loads, Unit: Preparation of Semi- or Water Repellent Treated Reinforcing Nylon perishable Subsistence Items; Clothing, Personal Equipment, Equipage; General Specification For Cord, Elastic, Nylon Cloth, Laminated, Water-Proof and Moisture-Vapor Permeable 2 Licensed by Information Handlin
10、g ServicesMIL-P-44LBBD 9999906 L94987L 983 MIL-P-44188D STANDARDS FEDERAL FED-STD-191 - Textile Test Methods FED-STD-751 - Stitches, Seams, and Stitching MIL I TARY MIL-STD-105 - Sampling Procedures and Tables for MIL-STD-129 - Marking for Shipment and Storage MIL-STD-147 - Palletized Unit Loads Ins
11、pection by Attributes (Unless otherwise indicated, copies of federal and military specifications, standards and handbooks are available from the Standardization Documents Order Desk, Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.) form a part of this document to the extent specified here
12、in. Unless otherwise specified, the issues of the documents which are DoD adopted shall be those listed in the issue of the DODISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS are the issues of the documents cited in the solicitation (see 6.
13、2). 2.2 Non-Government publications. The following document(s) AMERICAN SOCIETY FOR TESTING AND MATERIALS D 3951 - Standard Practice for Commercial Packaging (Applications for copies should be addressed to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1187.
14、) (Non-Government standards and other publications are normally available from the organizations that prepare or distribute the documents. These documents also may be available in or through libraries or other informational services.) 2.3 Order of precedence. In the event of a conflict between the t
15、ext of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3 Licensed by Information Handling ServicesMIL-P-44L88D = 9999906 1949872 81T
16、 m MIL-P-44188D 3. REQUIREMENTS 3.1 First article. When specified, (see 6.2), a sample shall be subjected to first article inspection, in accordance with 4.3. 3.2 Guide sample. Samples, when furnished, are solely for guidance and information to the contractor (see 6.2). Variations from this specific
17、ation may appear in the sample, in which case this specification shall govern. when practical as long as it meets the requirements of this specification. 3.3 Material. It is encouraged that recycled material be used 3.3.1 Cloth, laminated. The basic material for the parka shall be cloth, laminated,
18、waterproof and moisture vapor permeable, conforming to MIL-C-44187 except that as an alternate, the color of the back side of the laminated cloth may be Camouflage Green 483. 3.3.2 Cloth, plain weave. The material for the parka pockets, pocket linings, and upper right and left front linings shall be
19、 cloth, plain weave, Olive Green 106 or Camouflage Green 483, polyester/cotton conforming to A-A-52110. 3.3.3 Cloth, taffeta, nvlon. The material for the parka lining shall be cloth, taffeta, nylon, Olive Green 106 or Camouflage Green 483, conforming to type III, class 2 Of MIL-C-21852. 3.3.4 Interl
20、ininq. The interlining for left front, right front, and visor shall be buckram cloth, natural or bleached, conforming to type I of A-A-50186. all designated seams and stitching shall be cut in 15 1/16 inch strips from the material specified in 3.3.5.1 or 3.3.5.2 as applicable. 3.3.5 Seam sealina tap
21、e. The tape for covering and sealing 3.3.5.1 Sealina tape for basic material made with polvtetrafluoroethvlene film. The sealing tape shall be Olive Green 106 or Camouflage Green 483 and shall be cut from laminated material fabricated in layers meeting the following requirements: a. Backing - Nylon
22、tricot fabric weighing 1.5 2 0.3 ounces per square yard. b. Middle layer - Microporous expanded polytetrafluoroethylene film weighing 0.6 +0.2 or -0.1 ounces per square yard minimum. c. Adhesive - Thermoplastic not less than 5.4 mils thick. 4 Licensed by Information Handling Services3.3.5.2 Sealinq
23、tape for optional material with polvolefin film. The sealing tape shall be Olive Green 106 or Camouflage Green 483 and shall be cut from laminated material fabricated in layers meeting the following requirements: a. Backing - Nylon tricot fabric weighing 1.35 2 0.2 ounces per square yard. b. Middle
24、layer - Thermoset crosslinked urethane acrylic barrier weighing 1.0 minimum ounces per square yard minimum. c. Adhesive - Low temperature polyurethane, with 240F (nominal) melt point, not less than 7.5 mils thick. Under no circumstances shall the tape machine utilized incorporate an independent nozz
25、le air pressure control or a nozzle heat output in excess of 60OoC. settings. See 6.5 for recommended 3.3.6 Hanqer and hood drawcord tape. Neck hanger loop and hood drawcord shall be flat 1/2 inch nylon tape, Black, Olive Drab 7 or Camouflage Green 483 conforming to type III, class 2 of MIL-T-5038.
26、3.3.7 Webbinq, elastic. The elastic webbing at the bottom of the windskirt shall be 7/8 inch natural unbleached cotton webbing conforming to type I, class 5 of JJ-W-155. As an alternate, polyester webbing may be used as long as it meets the requirements for type I, class 5 of JJ-W-155, with the exce
27、ption that the mildew resistant treatment shall not apply. 3.3.7.1 Drawcord elastic. The parka waist drawcord shall be 3/16 inch diameter rubber elastic (multi-strand) with braided nylon or polyester covering, Olive Drab 7 conforming to type II Of MIL-C-43701. 3.3.8 Tape, fastener hook and loop. The
28、 nylon fastener tapes shall be Olive Green 106 or Camouflage 483 conforming to type II, class 1 of A-A-55126 and in the widths specified. 3.3.9 Fastener, slide, interlockinq. All slide fasteners shall conform to V-F-106, lengths shall be as specified, and the color black. All slide fasteners shall b
29、e equipped with a thong. 3.3.9.1 Front entry slide fastener. The front entry slide fastener shall be type IV, style 8, size MH, individual element molded plastic and be supplied with two sliders enabling a 2-way opening. 5 Licensed by Information Handling ServicesMIL-P-44188D 9999906 1949874 b92 MIL
30、-P-44188D 3.3.9.2 Underarm slide fastener. The underarm slide fastener shall be type I, style 6, size MS, nylon or polyester continuous coil or ladder type configuration. 3.3.10 Fastener, snap. The stud and post parts of the snap fastener shall be style 2A, finish 2 male and female complete, consist
31、ing of stud and eyelet size 1 or 2 with button size 1 or 2, and socket conforming to MIL-F-10884. An uncapped button may be used in areas where the surface will be concealed by a layer of base cloth. 3.3.11 Barrel lock. The barrel locks for the ends of the hood drawcord shall be black, ITW Nexus Bar
32、reloc or equivalent. 3.3.12 Thread. The thread for all seaming and stitching shall be polyester, size B, 2 or 3 ply, shade S-1, C.A. 66022 or Camouflage Green 483 conforming to type I, class 1, subclass B of V-T-285. As an alternate, size 40/2 or 3 ply polyester core thread conforming to A-A-50199 m
33、ay be used. For overedging the windskirt,.hood lining, and upper lining size 70/2 ply of A-A-50199 or Size B of V-T-285 may be used. All thread shall be water-repellent treated as specified in MIL-T-3530. 3.3.13 Labels. Each parka shall have a class 1 identification label, class 2 size label, and a
34、class 3 instruction label conforming to type VI of DDD-L-20. The label color shall be Medium Green, C.A. 70034, 70130, or 70131 or Camouflage Green 483. The labels shall show fastness to laundering. 3.3.13.1 Identification label. The identification labels shall read “PARKA, COLD WEATHER, CAM0UFLAGE.
35、I 3.3.13.2 Size label. The size label shall be as follows: X-Small X-Short Small X-Short Height: Up to 63 in. Height: Up to 63 in. Chest Mn: Up to 33 in. Chest Mn: From 33 to 37 in. Chest Mn: Up to 36 in. Chest Wn: From 36 to 40 in. NATO Size: 5060/7484 NATO Size: 5060/8494 Stock NO: 8415-01-228-130
36、6 Stock NO: 8415-01-228-1310 Medium X-Short X-Small Short Height: Up to 63 in. Height: From 63 to 67 in. Chest Mn: From 37 to 41 in. Chest Mn: Up to 33 in. Chest Wn: From 40 to 44 in. Chest Wn: Up to 36 in. NATO Size: 5060/9404 NATO Size: 6070/7484 Stock NO: 8415-01-228-1314 Stock NO: 8415-01-228-13
37、06 6 I Licensed by Information Handling Services. MIL-P-441BD 9999906 1949875 529 = MIL-P-44188D X-Small Lonq Small Lonq Height: From 71 in. and up Height: From 71 in. and up Chest Mn: Up to 33 in. Chest Mn: From 33 to 37 in. Chest Wn: Up to 36 in. Chest Wn: From 36 to 40 in. NATO Size: 8090/7484 NA
38、TO Size: 8090/8494 Stock NO. 8415-01-228-1309 Stock NO. 8415-01-228-1313 Small Short Medium Short Height: From 63 to 67 in. Height: From 63 to 67 in. Chest Mn: From 33 to 37 in. Chest Mn: From 37 to 41 in. Chest Wn: From 36 to 40 in. Chest Wn: From 40 to 44 in. NATO Size: 6070/8494 NATO Size: 6070/9
39、404 Stock NO: 8415-01-228-1311 Stock NO: 8415-01-228-1315 Larqe Short X-Small Reqular Height: Up to 67 in. Height: From 67 to 71 in. Chest: From 41 to 45 in. Chest Mn: Up to 33 in. Stock NO: 8415-01-228-1318 Chest Wn: Up to 36 in. NATO Size: 6070/0414 Stock NO: 8415-01-228-1308 NATO Size: 7080/9404
40、Medium Lonq Larqe Lonq Height: From 71 in. and up Height: From 71 in. and up Chest Mn: From 37 to 41 in. Chest: From 41 to 45 in. Chest Wn: From 40 to 44 in. Stock No: 8415-01-228-1320 Stock NO: 8415-01-228-1317 NATO Size: 8090/0414 NATO Size: 8090/9404 Small Reqular Medium Reqular Height: From 67 t
41、o 71 in. Height: From 67 to 71 in. Chest Mn: From 33 to 37 in. Chest Mn: From 37 to 41 in. Chest Wn: From 36 to 40 in. Chest Wn: From 40 to 44 in. NATO Size: 7080/8494 NATO Size: 7080/9404 Stock NO: 8415-01-228-1312 Stock NO: 8415-01-228-1316 Larqe Reqular X-Larqe Reqular Height: From 67 to 71 in. H
42、eight: From 67 to 71 in. Chest: From 41 to 45 in. Chest: From 45 in. and up NATO Size: 7080/0414 NATO Size: 7080/1424 Stock NO: 8415-01-228-1319 Stock NO: 8415-01-228-1321 X-Larqe Lonq Height: From 71 in. and up Chest: From 45 in. and up NATO Size: 8090/1424 Stock NO: 8415-01-228-1322 3.3.14.3 Combi
43、nation identification/size label. A combination identification/size label conforming to class VI of DDD-L-20 may be used. 7 Licensed by Information Handling ServicesM IL-P-4 4 18 8 D 9999SOb L94987b 465 MIL-P-44188D 3.3.14.4 Care instruction label. The care instruction label shall be as follows: PAR
44、KA, COLD WEATHER, CAMOUFLAGE A. Home Laundering (machine/hand): Permanent press machine setting or hand washing using a detergent. warm water. NOTE: Any residual detergent on the parka will decrease the water repellency. Rinse thoroughly in Home Drying: Tumble dry on permanent press, high temperatur
45、e setting. Remove immediately from dryer. DO NOT OVERDRY. To drip dry, place on rust-proof hanger. B. Post Laundry: Parka shall be laundered utilizing “Natick Formula I“. C. Field Laundry: Parka shall be laundered utilizing “Formula VIII“ of FM 10-280. Post/Field Drying: Remove immediately from drye
46、r. DO NOT OVERDRY. Tumble dry at medium temperature. WARNING! DO NOT STARCH, BLEACH, DRY CLEAN OR PRESS THE ECWCS PARKA. 3.3.14.5 Combination size, identification and instruction label. The identification label, size label, and instruction label may be combined into one label, conforming to class 14
47、. The three labels shall be printed as one continuous label with the size label first and the identification and instruction labels placed below the size label. The size and identification labels may be combined and the contents placed above the instruction label. A space of 1/2 inch minimum shall b
48、e maintained between the labels. In addition, a solid 1/16 inch minimum width shall extend across the entire label, approximately in the middle of the 1/2 inch blank space. The coating requirement shall conform to the class 3 label. 3.3.14.6 Label/taq. Each parka shall be individually bar- coded wit
49、h the type VIII, class 17 label/tag of DDD-L-20. This label/tag shall be located so that it is completely visible on the properly folded, packaged parka and causes no damage to the parka. . 3.4 Desicm. The parka shall be camouflage, with a drawcord closing hood, two-way closure front entry, elasticized waist, slide fastener underarm openings, fastener tape adjustable wrist tabs, and shall be fully lined, complete with windskirt. 8 Licensed by Information Handling ServicesMIL-P-44188D W 999990b 1949877 3T1 MIL-P-44188D 3.5 Patterns. Standard patterns, which provide an allowance of 3/8 i
