1、AMSC N/A FSC 5920 INCH-POUND MIL-PRF-15160/28D 15 November 2011 SUPERSEDING MIL-PRF-15160/28C 17 August 2006 PERFORMANCE SPECIFICATION SHEET FUSES, STYLE F28 This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the produc
2、t described herein shall consist of this specification sheet and MIL-PRF-15160. Ltr Inches mm Min Max Min Max A 4.469 4.531 113.51 115.09 B .402 .410 10.21 10.41 C .343 - 8.71 - D - .380 - 9.65 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. FIGURE 1
3、 Style F28, characteristic A. Inactive for new design after 27 December 1990. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-15160/28D 2 REQUIREMENTS: Interface and physical dimensions: See figure 1. Body: Fiber. Ferrule: Brass. Finish: Nic
4、kel or bright alloy or bright dipped, silver plated when specified. Terminal strength: 2 inch-pounds. Type designation: Type designation shall be as specified in table 1. Electrical: Voltage rating: 2,500 volts maximum. Overload interrupt: Maximum 1 hour at 135 percent of rated current Short circuit
5、 interrupt: 5 amperes at 2,500 volts ac. Current capacity: Maximum 1.5 hours at 110 percent of rated current. Current rating: See table I. Voltage rating: See table I. Characteristic: See table I. Part or Identifying Number (PIN): The PIN shall be constructed from table I (e.g., F28A2500V1A). TABLE
6、I. Part or Identifying Number 1/ Style Characteristic Voltage Current F28 A 2,500 A F28 A 2,500 A F28 A 2,500 1 A F28 A 2,500 1 A F28 A 2,500 2 A 1/ For silver plated terminals, the designator “S” is added after the current rating. VERIFICATION: Qualification inspection is not applicable for this sp
7、ecification sheet and is replaced by acceptance testing which shall consist of group A and group B inspection of MIL-PRF-15160. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-15160/28D 3 The margins of this specification are marked with vert
8、ical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the ent
9、ire content irrespective of the marginal notations and relationship to the last previous issue. Custodians: Preparing activity: Army - CR DLA - CC Navy - SH Air Force - 85 (5920-2012-001) DLA - CC Review activities: Air Force - 99 NOTE: The activities listed above were interested in this document as
10、 of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
