1、AMSC N/A FSC 5920 INCH-POUND MIL-PRF-15160/50D 15 November 2011 SUPERSEDING MIL-PRF-15160/50C 17 August 2006 PERFORMANCE SPECIFICATION SHEET FUSES: INSTRUMENT, POWER, AND TELEPHONE (NONINDICATING), STYLE F50 This specification is approved for use by all Departments and Agencies of the Department of
2、Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-PRF-15160. Ltr Inches mm Min Max Min Max A 1.390 1.422 35.31 36.12 B .921 .953 23.39 24.21 C .390 .422 9.91 10.72 D .015 .047 0.38 1.19 E .187 .219 4.75 5.56 NOTES: 1. Dimensions ar
3、e in inches. 2. Metric equivalents are given for general information only. FIGURE 1. Style F50, characteristic A. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-15160/50D 2 REQUIREMENTS: Interface and physical dimensions: See figure 1. Body:
4、 Plastic sheet. Terminal: Copper. Finish: Natural or tin plated. Terminal strength: Method 211 of MIL-STD-202, test condition E, 2 inch-pound torque between ferrules and fuse body. Electrical: Current rating: See table I. Voltage rating: See table I. Current carrying capacity: 100 percent normal rat
5、ing. Characteristic: See table I. Overload interrupt: Characteristic A within 1 hour at 135 percent of rated current. Characteristic A within 60 seconds at 200 percent of rated current. Short circuit interrupt 20 amperes at 90 volts dc. Part or Identifying Number (PIN): The PIN shall be constructed
6、from table I (e.g., F50A90V1/2A). TABLE I. Part or Identifying Number. Style Characteristic Maximum voltage Current rating F50 A 90 V 1/2 A F50 A 90 V 1 1/3 A F50 A 90 V 2 A VERIFICATION: Qualification inspection is not applicable for this specification sheet and is replaced by acceptance testing wh
7、ich shall consist of group A and group B inspection of MIL-PRF-15160. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-15160/50D 3 Referenced documents. In addition to MIL-PRF-15160, this document references the following: MIL-STD-202 The marg
8、ins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the
9、requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Custodians: Preparing activity: Army - CR DLA - CC Navy - SH Air Force - 85 (Project 5920-2012-002) DLA - CC Review activities: Army - AT, CR4, MI Navy - AS,
10、CG, MC, OS, YD Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
