1、INACTIVE FOR NEW DESIGN AFTER 30 JANUARY 1970 MIL-PRF-15160/6E 12 October 2011 SUPERSEDING MIL-PRF-15160/6D 14 March 2005 PERFORMANCE SPECIFICATION SHEET FUSES; INSTRUMENT, POWER, AND TELEPHONE (NONINDICATING), STYLE F06 This specification is approved for use by all Departments and Agencies of the D
2、epartment of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-PRF-15160. Ltr Inches mm Min Max Min Max A 1.219 1.281 30.96 32.54 B .277 .285 7.24 7.36 C - .340 - 8.64 D - .256 - 6.50 NOTES: 1. Dimensions are in inches. 2. Metric e
3、quivalents are given for general information only. FIGURE 1. Style F06 fuse. AMSC N/A FSC 5920 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-15160/6E 2 REQUIREMENTS: Interface and physical dimensions: See figure 1. Case: Plastic
4、or ceramic tube Ferrule: Brass, copper, or copper alloy. Finish: Nickel, bright alloy plate, or silver when specified. Terminal strength: Method 211 of MIL-STD-202, test condition E, 2 inch-pound torque between ferrules and fuse body. Electrical: Current rating: See table I. Voltage rating: See tabl
5、e I. Characteristic: See table I. Overload interrupt: Maximum 1 hour at 135 percent of rated current. Short circuit interrupt: Minimum or 10,000 amperes at rated voltage dc. Type designation: Type designation shall be as specified in table I. TABLE I. Type designation. 1/ Style Characteristic Voltag
6、e Current F06 F06 F06 F06 F06 F06 A A A A A A 250 V 250 V 250 V 250 V 250 V 250 V 1 A 2 A 3 A 5 A 10 A 15 A 1/ For silver plated terminals, the designator “S” is added after the current rating. VERIFICATION: Qualification inspection: First article in accordance with table III of MIL-PRF-15160 for 1,
7、 2, and 3 ampere current ratings only. Conformance inspection: Group A and B inspections of MIL-PRF-15160 for 1, 2, and 3 ampere current ratings only. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-15160/6E 3 Cross reference. For applicable
8、cross reference, see table II. The existing stocks of superseded items may be used. When exhausted, the superseding parts shall be used. TABLE II. Cross reference. Superseding number Superseded numbers 81349 96906 71400 75915 75915 98997 F06A250V1A 1/ F06A250V2A F06A250V3A F06A250V5A F06A250V10A F06
9、A250V15A F06G1R00A 1/ R06G2R00A R06G3R00A R06G5R00A F06G10R00A F06G15R00A MS90082-1 2/ MS90082-2 MS90082-3 MS90082-4 MS90082-5 MS90082-6 ABS1 ABS2 ABS3 ABS5 ABS10 ABS15 494001 494002 494003 494005 494010 494015 414001 414002 414003 414005 414010 414015 4AB1 4AB2 4AB3 4AB5 4AB10 4AB15 1/ A letter S f
10、ollowing the part number signifies silver plating. 2/ A second dash number (-1) signifies silver plating. Referenced documents. In addition to MIL-PRF-15160, this document references the following: MIL-STD-202 The margins of this specification are marked with vertical lines to indicate where changes
11、 from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marg
12、inal notations and relationship to the last previous issue. Custodians: Preparing activity: Army - CR DLA - CC Navy - SH Air Force - 85 (Project 5920-2011-032) DLA - CC Review activities: Army - AT, CR4, MI Navy - AS, CG, EC, MC Air Force - 19, 99 NOTE: The activities listed above were interested in
13、 this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
