1、AMSC N/A FSC 59GP MIL-PRF-15733/34R 8 October 2009 SUPERSEDING MIL-PRF-15733/34P 24 March 2004 PERFORMANCE SPECIFICATION SHEET FILTERS AND CAPACITORS, RADIO FREQUENCY INTERFERENCE, HERMETICALLY SEALED, STYLE FL90 * This specification is approved for use by all Depart- ments and Agencies of the Depar
2、tment of Defense. The requirements for acquiring the filters described herein shall consist of this specification sheet and MIL-PRF-15733. FIGURE 1. Case dimensions and circuit diagrams. Part or Identifying Numbers (PINs) M15733/34-0008, -0022, -0032, -0033, and -0034 are inactive for new design as
3、of 17 October 1986. PINs M15733/34-0014, -0023, -0025, -0026, and -0027 are inactive for new design as of 15 January 1988. PINs M15733/34-0010, -0015, -0019, and -0024 are inactive for new design after 22 March 1991. PINs M15733/34-0003, -0007, -0013, -0016, -0018, -0020, -0021, -0029, -0030, -0035,
4、 and -0036 are inactive for new design after 8 October 2009. For new design, see table IV for supersession data. INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-15733/34R 2 NOTES: 1. Dimensions are in inches. 2. Metric equivalents
5、are in parentheses. 3. Metric equivalents are given for general information only. 4. Circuit diagram is for information only. 5. All filters shall be supplied with mounting hardware. 6. Terminal identification (nonsymmetrical filters): The case shall be marked at the threaded end of the filter, with
6、 the symbol “C” or the symbol “L”, as follows: Circuit Symbol L1- - - - - - - - - - - - - - - - C L2- - - - - - - - - - - - - - - - L 7. Recommended mounting torque: 48 in-oz (.250-28 UNF-2A). 60 in-oz (.3125-24 UNF-2A). 96 in-oz (.216-32 UNF-2A). 8. Dash numbers 0003 through 0037 dimension L config
7、uration is shown as a slot. Actual dimension L configuration shall be as specified in the dimensions table. FIGURE 1. Case dimensions and circuit diagrams - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-15733/34R 3 Dash number We
8、ight (grams) (max) A B C D E Max Max Min Max Min Max Min Max 0001 34 1.763 .702 .365 .385 .297 .327 .360 .483 0002 34 1.763 .702 .365 .385 .297 .327 .360 .483 0003 8.2 .730 .416 .302 .322 .177 .197 .100 .190 0004 22 1.195 .702 .365 .385 .297 .327 .198 .238 0005 22 1.195 .702 .365 .385 .297 .327 .198
9、 .238 0006 22 1.195 .702 .365 .385 .297 .327 .198 .238 0007 8.2 .760 .385 .302 .322 .177 .197 .100 .190 0008 8.2 .760 .385 .302 .322 .177 .197 .100 .190 0009 22 1.170 .690 .365 .385 .297 .327 .198 .238 0010 9.0 .793 .416 .302 .322 .302 .322 .100 .190 0011 34 .890 .702 .365 .385 .302 .322 .199 .235 0
10、012 34 .890 .702 .365 .385 .302 .322 .199 .235 0013 34 .890 .702 .365 .385 .302 .322 .199 .235 0014 8.5 .730 .416 .302 .322 .302 .322 - - - .190 0015 8.5 .743 .416 .302 .322 .302 .322 - - - .190 0016 34 .890 .416 .302 .322 .159 .221 .140 .160 0017 8.5 .743 .416 .302 .322 .159 .221 .140 .160 0018 8.5
11、 .743 .416 .302 .322 .159 .221 .140 .160 Inches mm Inches mm Inches mm Inches mm .003 .010 .015 .018 .020 .022 .025 .050 .057 .060 .062 .063 .070 .077 .080 .083 .088 .090 .093 .095 .098 0.08 0.25 0.38 0.46 0.51 0.56 0.64 1.27 1.45 1.52 1.57 1.60 1.78 1.96 2.03 2.11 2.24 2.29 2.36 2.41 2.49 .099 .100
12、 .119 .125 .130 .140 .146 .159 .160 .162 .169 .177 .180 .182 .186 .190 .195 .196 .197 .198 .199 2.51 2.54 3.02 3.17 3.30 3.56 3.71 4.04 4.06 4.11 4.29 4.50 4.57 4.62 4.72 4.83 4.95 4.98 5.00 5.03 5.05 .200 .205 .206 .210 .216 .221 .230 .231 .235 .238 .240 .250 .260 .265 .297 .302 .312 .3125 .322 .32
13、7 .360 5.08 5.21 5.23 5.33 5.49 5.61 5.84 5.87 5.97 6.05 6.10 6.35 6.60 6.73 7.54 7.67 7.92 7.938 8.18 8.31 9.14 .365 .385 .410 .416 .474 .483 .575 .600 .690 .702 .730 .743 .760 .778 .793 .890 .900 1.170 1.195 1.219 1.763 9.27 9.78 10.41 10.57 12.04 12.27 14.61 15.24 17.53 17.83 18.54 18.87 19.30 19
14、.76 20.14 22.61 22.86 29.72 30.35 30.96 44.78 FIGURE 1. Case dimensions and circuit diagrams - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-15733/34R 4 Dash No. F G H J K L Min Max Min Max Min Max Mounting thread Internal tooth
15、lockwasher thickness Wire hole or slot 0001 .146 .230 .090 .100 .235 .265 .3125-24 UNF-2A .022 .010 .095 .015 dia 0002 .146 .230 .090 .100 .235 .265 .3125-24 UNF-2A .022 .010 .095 .015 dia 0003 .083 .130 .088 .098 .190 .210 .250-28 UNF-2A .025 .010 .050 .010 dia or .070 .010 dia or .050 .010 x .070
16、.010 0004 .099 .140 .090 .100 .235 .265 .3125-24 UNF-2A .022 .010 .062 .015 x .125 .015 0005 .099 .140 .090 .100 .235 .265 .3125-24 UNF-2A .022 .010 .062 .015 x .125 .015 0006 .099 .140 .090 .100 .235 .265 .3125-24 UNF-2A .022 .010 .062 .015 x .125 .015 0007 .100 .130 .088 .098 .190 .210 .250-28 UNF
17、-2A .025 .010 .070 .020 dia 0008 .100 .130 .088 .098 .190 .210 .250-28 UNF-2A .025 .010 .070 .020 dia 0009 .099 .140 .090 .100 .235 .265 .3125-24 UNF-2A .022 .010 .060 .020 dia or .060 .015 x .125 .015 0010 .100 .130 .090 .100 .190 .210 .250-28 UNF-2A .025 .010 0011 .099 .140 .090 .100 .235 .265 .31
18、25-24 UNF-2A .025 .010 .093 .020 dia or .062 .010 x .125 .010 0012 .099 .140 .090 .100 .235 .265 .3125-24 UNF-2A .025 .010 0013 .099 .140 .090 .100 .235 .265 .3125-24 UNF-2A .025 .010 .093 .020 dia or .062 .010 x .125 .010 0014 .100 .130 - - - .100 .190 .210 .250-28 UNF-2A .025 .010 .060 .020 dia or
19、 .060 .015 x .125 .015 0015 .099 .119 .088 .098 .190 .210 .250-28 UNF-2A .022 .010 .062 .020 dia or .050 .010 x .070 .010 0016 .100 .190 .088 .098 .169 .231 .250-28 UNF-2A .022 .010 .062 .020 dia or .050 .010 x .070 .010 0017 .100 .190 .088 .098 .169 .231 .250-28 UNF-2A .022 .010 .062 .020 dia or .0
20、50 .010 x .070 .010 0018 .100 .190 .088 .098 .169 .231 .250-28 UNF-2A .022 .010 .062 .020 dia or .050 .010 x .070 .010 FIGURE 1. Case dimensions and circuit diagrams - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-15733/34R 5 Das
21、h no. Weight (grams) (max) A B C D E Max Max Min Max Min Max Min Max 0019 9.0 .793 .416 .302 .322 .297 .327 - - - .190 0020 34 .900 .702 .365 .385 .297 .327 .198 .238 0021 34 .900 .702 .365 .385 .297 .327 .198 .238 0022 8 .760 .385 .302 .322 .182 .190 - - - .190 0023 8 .760 .385 .302 .322 .182 .190
22、- - - .190 0024 8 .760 .385 .302 .322 .182 .190 - - - .190 0025 8 .760 .385 .302 .322 .182 .190 - - - .190 0026 8 .760 .385 .302 .322 .182 .190 - - - .190 0027 8 .760 .385 .302 .322 .182 .190 - - - .190 0028 8 .760 .385 .302 .322 .182 .190 - - - .190 0029 16 .900 .702 .365 .385 .297 .327 - - - .238
23、0030 8 .900 .416 .302 .322 .159 .221 - - - .190 0031 22 1.219 .702 .365 .385 .297 .327 - - - .312 0032 9 .730 .416 .302 .322 .302 .322 - - - .190 0033 9 .778 .416 .302 .322 .302 .322 - - - .190 0034 9 .760 .385 .302 .322 .302 .322 - - - .190 0035 7 .474 .410 .297 .327 .180 .200 - - - .162 0036 8 .60
24、0 .385 .297 .327 .180 .200 - - - .162 0037 9 .575 .690 .365 .385 .297 .327 .198 .236 FIGURE 1. Case dimensions and circuit diagrams - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-15733/34R 6 Dash no. F G H J K L Min Max Min Max
25、Min Max Mounting thread Internal tooth lockwasher thickness Wire hole or slot 0019 .100 .190 .090 .100 .196 .206 .250-28 UNF-2A .022 .010 .060 .020 dia or .060 .015 x .125 .015 0020 .099 .140 .090 .100 .235 .265 .3125-24 UNF-2A .022 .010 .062 .015 x .125 .015 0021 .099 .140 .090 .100 .235 .265 .3125
26、-24 UNF-2A .022 .010 .062 .015 x .125 .015 0022 .100 .190 .080 .100 .190 .210 .250-28 UNF-2A .018 .003 .070 .020 dia 0023 .100 .190 .080 .100 .190 .210 .250-28 UNF-2A .018 .003 .070 .020 dia 0024 .100 .190 .080 .100 .190 .210 .250-28 UNF-2A .018 .003 .070 .020 dia 0025 .100 .190 .080 .100 .190 .210
27、.250-28 UNF-2A .018 .003 .070 .020 dia 0026 .100 .190 .080 .100 .190 .210 .250-28 UNF-2A .018 .003 .070 .020 dia 0027 .100 .190 .080 .100 .190 .210 .250-28 UNF-2A .018 .003 .070 .020 dia 0028 .100 .190 .080 .100 .190 .210 .250-28 UNF-2A .018 .003 .070 .020 dia 0029 - - - .140 - - - .100 .235 .265 .3
28、125-24 UNF-2A .022 .010 .062 .015 x .125 .015 0030 .100 .190 .088 .098 .190 .210 .250-28 UNF-2A .022 .010 .060 .020 dia or .070 .010 dia or .050 .010 x .070 .010 0031 - - - .140 - - - .100 .240 .260 .3125-24 UNF-2A .025 .010 .062 .015 x .125 .015 0032 - - - .130 - - - .100 .196 .206 .250-28 UNF-2A .
29、025 .010 .060 .020 dia 0033 - - - .130 - - - .100 .195 .205 .250-28 UNF-2A .025 .010 .060 .020 dia 0034 .100 .190 .080 .100 .190 .210 .250-28 UNF-2A .018 .003 .070 .020 dia 0035 .100 .190 .057 .077 - - - .186 .216-32 UNEF-2A .022 .010 .063 max dia. or .050 .010 x .070 .010 0036 .100 .190 .057 .077 -
30、 - - .186 .216-32 UNEF-2A .022 .010 .063 (1.60) max or .050 .010 x .070 .010 0037 .100 .190 .080 .100 - - - .260 .3125-24 UNF-2A MS35336-62 .062 .015 x .125 .015 FIGURE 1. Case dimensions and circuit diagrams - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without l
31、icense from IHS-,-,-* TABLE I. Electrical characteristics. Cap. (F) Rated voltage (volts) Ckt dia-gram Max curr-ent (amp). Max Voltage drop (volts) Minimum insertion loss (db) in accordance with MIL-STD-220 1/ Dash no. dc 2/ ac At +25C At -55C and +125C dc ac 30 kHz 50 kHz 75 kHz 100 kHz 150 kHz 300
32、 kHz 500 kHz 1 MHz 10 MHz 1 GHz 30 kHz 50 kHz 75 kHz 100 kHz 150 kHz 300 kHz 500 kHz 1 MHz 10 MHz 1 GHz .5 300 125 L110 .30 1.2 5 - - - 19 25 - 30 57 70 4 - - - 18 24 - 30 56 70 0012 .25 200 125 L12 .20 1.2 - 5 - 11 15 25 - 45 70 70 - - - 11 15 25 - 45 70 70 0029 3/ .5 200 125 Pi2 .22 1.2 - 4 - 24 3
33、6 54 - 80 80 70 - - - 21 34 52 - 80 80 70 0006 .25 200 125 L13 .20 1.2 2 6 - - 15 20 - 34 67 70 - 4 - - 13 18 - 32 65 70 0016 3/ .25 200 125 L13 .15 1.2 - 5 - 10 14 21 - 39 70 70 - - - 9 13 20 - 39 70 70 0020 3/ .25 200 125 L15 .10 1.2 - 5 - 10 13 19 - 32 69 70 - - - 9 12 18 - 31 68 70 0021 3/ .25 2
34、00 125 L25 .75 1.2 2 5 - - 15 21 - 32 60 70 2 5 - - 15 21 - 32 60 70 0030 3/ .5 200 125 Pi5 .10 1.2 - - - - 10 28 - 64 80 70 - - - - 8 26 - 62 80 70 0004 .5 200 125 Pi10 .75 1.2 - - - - 16 18 - 48 80 70 - - - - 15 17 - 48 80 70 0005 .36 200 125 L120 .10 1.2 - 9 - 14 19 25 - 35 57 70 - - - 13 17 23 -
35、 34 55 70 0001 .36 200 125 L2 20 .10 1.2 - 9 - 14 19 25 - 35 57 70 - - - 13 17 23 - 34 55 70 0002 - 150 125 Pi.5 .18 1.2 - 15 - 35 46 65 70 70 70 70 - 14 - 34 45 64 70 70 70 70 0032 3/ - 150 125 Pi1 .25 1.2 - - - 6 23 40 50 70 80 80 - - - 3 20 37 47 67 80 80 0033 3/.25 150 125 L22 .13 1.2 - - - - 8
36、15 20 30 68 70 - - - - 7 14 19 29 67 70 0010 3/ .15 150 125 L13 .15 1.2 - - - - 8 15 - 30 68 70 - - - - 7 14 - 29 67 70 0015 3/ .3 150 125 Pi 3 .15 1.2 - - - - - 20 37 55 80 80 - - - - - 18 35 53 80 80 0019 3/ .5 150 125 Pi3 .30 1.2 - - - 12 27 47 61 80 80 80 - - - 11 26 46 60 80 80 80 0031 .33 150
37、125 L1 10 .08 1.2 - 9 - 14 18 24 28 34 54 70 - 8 - 13 17 23 27 33 53 70 0011 .25 150 125 L2 10 .30 1.2 - 6 - 12 14 21 25 30 54 70 - 5 - 11 13 20 24 29 53 70 0013 3/ See footnotes at end of table. MIL-PRF-15733/34R7Provided by IHSNot for ResaleNo reproduction or networking permitted without license f
38、rom IHS-,-,-* TABLE I. Electrical characteristics - Continued. Cap (F) Rated voltage (volts) Ckt. dia-gram Max Curr-ent (amp) Max Voltage drop (volts) Minimum insertion loss (db) in accordance with MIL-STD-220 1/ Dash no. dc 2/ ac At +25C At -55C and +125C dc ac 30 kHz 50 kHz 75 kHz 100 kHz 150 kHz
39、300 kHz 500 kHz 1 MHz 10 MHz 1 GHz 30 kHz 50 kHz 75 kHz 100 kHz 150 kHz 300 kHz 500 kHz 1 MHz 10 MHz 1 GHz - 100 - Pi .1 1.0 - 40 - 60 68 70 70 70 70 70 70 38 - 60 68 70 70 - 70 70 70 0022 3/ 1.0 100 - Pi .25 1.0 - 28 - 52 60 70 70 70 70 70 70 28 - 52 60 70 70 - 70 70 70 0023 3/ .75 100 - L1 .5 .10
40、- 13 18 - - 33 44 - 64 70 70 11 16 - - 31 42 - 62 68 70 00183/ 1.0 100 - Pi .5 .50 - 18 - 40 49 59 70 - 70 70 70 18 - 40 49 59 70 - 70 70 70 0024 3/ 1.0 100 - Pi 1 .25 - - - 22 32 48 64 - 70 70 70 - - 22 32 48 64 - 70 70 70 0025 3/ 1.0 100 - Pi 2 .13 - - - - - 30 48 - 70 70 70 - - - - 30 48 - 70 70
41、70 0026 3/ 1.0 100 - Pi 3 .11 - - - - - 10 34 - 70 70 70 - - - - 10 34 - 70 70 70 0027 3/ 1.0 100 - Pi 5 .10 - - - - 22 39 58 - 80 80 80 - - - 20 37 56 - 80 80 80 0009 1.5 100 - Pi 5 .05 - - - - - - 17 - 55 70 70 - - - - - 14 - 45 70 70 0014 3/ .75 100 - L110 .10 - 10 15 - - 26 29 - 38 44 70 8 13 -
42、- 24 27 - 36 42 70 0017 1.0 100 - Pi10 .03 - 9 - 12 18 24 29 - 40 52 62 9 - 12 18 24 29 - 40 52 62 0028 - 100 - Pi10 .03 - 9 - 12 18 24 29 - 40 52 62 9 - 12 18 24 29 - 40 52 62 00343/ 1.4 50 - Pi2 .14 - - - - 33 46 65 76 80 80 80 - - - 31 44 63 74 78 78 80 00033/ 1.4 28 - L2 .45 .54 - 15 - - - 29 33
43、 - 46 66 70 - - - - 17 21 - 34 54 70 00083/ 1.4 28 - L2 10 .10 - 15 - - - 28 31 - 42 56 70 - - - - 16 19 - 30 44 70 00073/ 0.3 100 - C10 .04 - - 10 - 15 19 25 - 35 55 70 - 8 - 13 17 23 - 35 55 70 00353/ 1.1 50 - C 10 .04 - - 17 - 23 28 33 - 44 48 70 - 15 - 21 26 31 - 44 48 70 00363/ 0.36 275 125 C 1
44、5 .075 - - 9 - 13 15 21 - 31 51 70 - 7 - 11 13 19 - 31 51 70 0037 1/ Insertion loss measurements shall be made under full load over the frequency range of 100 kHz to 10 MHz. Insertion loss measurements above or below this frequency range shall be made under no-load. 2/ 0 to 400 Hz. 3/ Inactive for n
45、ew design.MIL-PRF-15733/34R8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-15733/34R 9 REQUIREMENTS: * Interface and physical dimensions: See figure 1. Weight: See figure 1. Case: Metal. Case and mounting hardware finish: In accordance with
46、MIL-PRF-15733. Pure tin finish is prohibited as an undercoat and as a final finish (see MIL-PRF-15733). Terminals: Solderable. Pure tin finish is prohibited as an undercoat and as a final finish (see MIL-PRF-15733). Operating temperature range: -55C to +125C. Rated voltage: See table I. Rated curren
47、t: See table I. Insertion loss: at 25C and temperature extremes, see table I. Voltage conditioning (applicable to conformance inspection only): Prior to group A inspection, 100 percent of each lot of filters shall be subjected to voltage conditioning as follows: Test temperature:+125C, +4C, -0C. Tes
48、t voltage: For dc rated filters: 2 times rated voltage. For ac and dc rated filters: 1.2 times rated ac voltage at maximum rated frequency. Duration of exposure to test voltage: 100 4 hours (-0001 through -0021, and -0029 through -0033); and 164 4 hours (-0022 through -0028 and -0034). Measurements after completion of exposure: While filters are stabilized at +125 C, insulation resistance shall be measured at +125C. Filters shall th
