DLA MIL-PRF-39003 3 J-2012 CAPACITORS FIXED ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM (POLARIZED SINTERED SLUG) ESTABLISHED RELIABILITY STYLE CSR23.pdf

上传人:hopesteam270 文档编号:692849 上传时间:2018-12-30 格式:PDF 页数:8 大小:90.76KB
下载 相关 举报
DLA MIL-PRF-39003 3 J-2012 CAPACITORS FIXED ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM (POLARIZED SINTERED SLUG) ESTABLISHED RELIABILITY STYLE CSR23.pdf_第1页
第1页 / 共8页
DLA MIL-PRF-39003 3 J-2012 CAPACITORS FIXED ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM (POLARIZED SINTERED SLUG) ESTABLISHED RELIABILITY STYLE CSR23.pdf_第2页
第2页 / 共8页
DLA MIL-PRF-39003 3 J-2012 CAPACITORS FIXED ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM (POLARIZED SINTERED SLUG) ESTABLISHED RELIABILITY STYLE CSR23.pdf_第3页
第3页 / 共8页
DLA MIL-PRF-39003 3 J-2012 CAPACITORS FIXED ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM (POLARIZED SINTERED SLUG) ESTABLISHED RELIABILITY STYLE CSR23.pdf_第4页
第4页 / 共8页
DLA MIL-PRF-39003 3 J-2012 CAPACITORS FIXED ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM (POLARIZED SINTERED SLUG) ESTABLISHED RELIABILITY STYLE CSR23.pdf_第5页
第5页 / 共8页
点击查看更多>>
资源描述

1、AMSC N/A FSC 5910 INCH-POUND MIL-PRF-39003/3J 23 August 2012 SUPERSEDING MIL-PRF-39003/3H 3 December 2009 PERFORMANCE SPECIFICATION SHEET CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM, (POLARIZED, SINTERED SLUG), ESTABLISHED RELIABILITY, STYLE CSR23 FAILURE RATE LEVELS “M“, “P“ AND “

2、R“ ARE INACTIVE FOR NEW DESIGN AFTER 2 FEBRUARY 1984. FAILURE RATE LEVEL “S“ IS INACTIVE FOR NEW DESIGN AFTER 15 AUGUST 1984. This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist

3、 of this specification sheet and MIL-PRF-39003. Inches mm .094 .250 1.500 2.39 6.35 38.10 FIGURE 1. Dimensions and configurations. CIRCUIT DIAGRAM Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39003/3J 2 Case size Dimensions L .031 (0.79) D

4、 .016 (0.41) M .002 (0.05) J max A B C D .286 ( 7.26) .474 (12.04) .686 (17.42) .786 (19.96) .135 (3.43) .185 (4.70) .289 (7.34) .351 (8.92) .020 (0.51) .020 (0.51) .025 (0.64) .025 (0.64) .422 (10.72) .610 (15.49) .822 (20.88) .922 (23.42) NOTES: 1. Dimensions are in inches. 2. Metric equivalents a

5、re in parentheses and are given for general information only. 3. The case insulation shall extend .015 (0.38 mm) minimum beyond each end. However, when a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body. 4. Lead length may be a minimum of 1-inch long for use in tape

6、 and reel automatic insertion equipment, when specified. FIGURE 1. Dimensions and configuration - Continued. REQUIREMENTS: Design and construction: Dimensions and configuration: See figure 1. Case type: Tubular, insulated. Material: Metal (alloy unspecified). Type of seal: Hermetic. Leads: Types N-3

7、2, N-52, W-32, or W-52 of MIL-STD-1276. DC rated voltage: See table I. Above +85C voltage derating is required (see MIL-PRF-39003). DC leakage (DCL): See table I. Capacitance (Cap.) (nom): See table I. Cap. tolerance: See table I. Dissipation factor (DF): See table I. Operating temperature: -55C to

8、+125C. Failure rate level: See table I. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Style CSR23 characteristics and PINs. DC rated voltage Capaci- tance (nom) Capaci- tance tolerance DC leakage at Dissipation factor at -55C through +125C

9、 Case size PIN M39003/03- 1/ failure rate level for (%/1,000 hours) +25C +85C +125C M (1.0) P (0.1) R (0.01) S (0.001) G (1.0) B (0.1) C (0.01) D (0.001) volts 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 F 10 10 12 100 100 330 330 390 470 470 680 680 820 1,000 1,000 percent 10 20 10 10 20 10 20 10 10 20 10 20 10

10、10 20 A 0.9 0.9 1 6 6 15 15 15 15 15 20 20 20 30 30 A 9 9 10 60 60 150 150 150 150 150 200 200 200 300 300 A 11 11 12.5 75 75 188 188 188 188 188 250 250 250 375 375 percent 6 6 6 8 8 8 8 10 10 10 10 10 10 10 10 A A A B B C C C C C D D D D D 0101- 0102- 0103- 0104- 0105- 0106- 0107- 0108- 0109- 0110

11、- 0111- 0112- 0113- 0114- 0115- 0201- 0202- 0203- 0204- 0205- 0206- 0207- 0208- 0209- 0210- 0211- 0212- 0213- 0214- 0215- 0301- 0302- 0303- 0304- 0305- 0306- 0307- 0308- 0309- 0310- 0311- 0312- 0313- 0314- 0315- 0401- 0402- 0403- 0404- 0405- 0406- 0407- 0408- 0409- 0410- 0411- 0412- 0413- 0414- 0415

12、- 5001- 5002- 5003- 5004- 5005- 5006- 5007- 5008- 5009- 5010- 5011- 5012- 5013- 5014- 5015- 2001- 2002- 2003- 2004- 2005- 2006- 2007- 2008- 2009- 2010- 2011- 2012- 2013- 2014- 2015- 3001- 3002- 3003- 3004- 3005- 3006- 3007- 3008- 3009- 3010- 3011- 3012- 3013- 3014- 3015- 4001- 4002- 4003- 4004- 4005

13、- 4006- 4007- 4008- 4009- 4010- 4011- 4012- 4013- 4014- 4015- 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 6.8 6.8 8.2 47 47 56 68 68 82 220 220 270 390 470 470 560 10 20 10 10 20 10 10 20 10 10 20 10 10 10 20 10 1 1 1.2 5 5 6 7 7 8 15 15 15 20 20 20 30 10 10 12 50 50 60 70 70 80 150 150 150 200

14、200 200 300 12.5 12.5 15 63 63 75 88 88 100 188 188 188 250 250 250 375 6 6 6 6 6 6 6 6 6 8 8 8 10 10 10 10 A A A B B B B B B C C C D D D D 0116- 0117- 0118- 0119- 0120- 0121- 0122- 0123- 0124- 0125- 0126- 0127- 0128- 0129- 0130- 0131- 0216- 0217- 0218- 0219- 0220- 0221- 0222- 0223- 0224- 0225- 0226

15、- 0227- 0228- 0229- 0230- 0231- 0316- 0317- 0318- 0319- 0320- 0321- 0322- 0323- 0324- 0325- 0326- 0327- 0328- 0329- 0330- 0331- 0416- 0417- 0418- 0419- 0420- 0421- 0422- 0423- 0424- 0425- 0426- 0427- 0428- 0429- 0430- 0431- 5016- 5017- 5018- 5019- 5020- 5021- 5022- 5023- 5024- 5025- 5026- 5027- 5028

16、- 5029- 5030- 5031- 2016- 2017- 2018- 2019- 2020- 2021- 2022- 2023- 2024- 2025- 2026- 2027- 2028- 2029- 2030- 2031- 3016- 3017- 3018- 3019- 3020- 3021- 3022- 3023- 3024- 3025- 3026- 3027- 3028- 3029- 3030- 3031- 4016- 4017- 4018- 4019- 4020- 4021- 4022- 4023- 4024- 4025- 4026- 4027- 4028- 4029- 4030

17、- 4031- See footnote at end of table. MIL-PRF-39003/3J3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Style CSR23 characteristics and PINs - Continued. DC rated voltage Capaci- tance (nom) Capaci- tance tolerance DC leakage at Dissipation f

18、actor at -55C through +125C Case size PIN M39003/03- 1/ failure rate level for (%/1,000 hours) +25C +85C +125C M (1.0) P (0.1) R (0.01) S (0.001) G (1.0) B (0.1) C (0.01) D (0.001) volts 15 15 15 15 15 15 15 15 15 15 15 15 15 15 F 4.7 4.7 5.6 33 33 39 150 150 180 220 220 270 330 330 percent 10 20 10

19、 10 20 10 10 20 10 10 20 10 10 20 A 1 1 1.3 6 6 6 15 15 15 20 20 20 20 20 A 10 10 13 60 60 60 150 150 150 200 200 200 200 200 A 12.5 12.5 16.5 75 75 75 188 188 188 250 250 250 250 250 percent 4 4 4 6 6 6 8 8 8 8 8 8 8 8 A A A B B B C C C D D D D D 0132- 0133- 0134- 0135- 0136- 0137- 0138- 0139- 0140

20、- 0141- 0142- 0143- 0144- 0145- 0232- 0233- 0234- 0235- 0236- 0237- 0238- 0239- 0240- 0241- 0242- 0243- 0244- 0245- 0332- 0333- 0334- 0335- 0336- 0337- 0338- 0339- 0340- 0341- 0342- 0343- 0344- 0345- 0432- 0433- 0434- 0435- 0436- 0437- 0438- 0439- 0440- 0441- 0442- 0443- 0444- 0445- 5032- 5033- 5034

21、- 5035- 5036- 5037- 5038- 5039- 5040- 5041- 5042- 5043- 5044- 5045- 2032- 2033- 2034- 2035- 2036- 2037- 2038- 2039- 2040- 2041- 2042- 2043- 2044- 2045- 3032- 3033- 3034- 3035- 3036- 3037- 3038- 3039- 3040- 3041- 3042- 3043- 3044- 3045- 4032- 4033- 4034- 4035- 4036- 4037- 4038- 4039- 4040- 4041- 4042

22、- 4043- 4044- 4045- 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 2.7 3.3 3.3 3.9 18 22 22 27 56 68 68 82 100 100 120 150 10 10 20 10 10 10 20 10 10 10 20 10 10 20 10 10 0.8 1 1 1.2 4 4 4 5 9 10 10 10 15 15 15 20 8 10 10 12 40 40 40 50 90 100 100 100 150 150 150 200 10 12.5 12.5 15 50 50 50 63 110

23、 125 125 125 188 188 188 250 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 8 A A A A B B B B C C C C C C C D 0146- 0147- 0148- 0149- 0150- 0151- 0152- 0153- 0154- 0155- 0156- 0157- 0158- 0159- 0160- 0161- 0246- 0247- 0248- 0249- 0250- 0251- 0252- 0253- 0254- 0255- 0256- 0257- 0258- 0259- 0260- 0261- 0346- 0347- 034

24、8- 0349- 0350- 0351- 0352- 0353- 0354- 0355- 0356- 0357- 0358- 0359- 0360- 0361- 0446- 0447- 0448- 0449- 0450- 0451- 0452- 0453- 0454- 0455- 0456- 0457- 0458- 0459- 0460- 0461- 5046- 5047- 5048- 5049- 5050- 5051- 5052- 5053- 5054- 5055- 5056- 5057- 5058- 5059- 5060- 5061- 2046- 2047- 2048- 2049- 205

25、0- 2051- 2052- 2053- 2054- 2055- 2056- 2057- 2058- 2059- 2060- 2061- 3046- 3047- 3048- 3049- 3050- 3051- 3052- 3053- 3054- 3055- 3056- 3057- 3058- 3059- 3060- 3061- 4046- 4047- 4048- 4049- 4050- 4051- 4052- 4053- 4054- 4055- 4056- 4057- 4058- 4059- 4060- 4061- See footnote at end of table. MIL-PRF-3

26、9003/3J4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Style CSR23 characteristics and PINs - Continued. DC rated voltage Capaci- tance (nom) Capaci- tance tolerance DC leakage at Dissipation factor at -55C through +125C Case size PIN M3900

27、3/03- 1/ failure rate level for (%/1,000 hours) +25C +85C +125C M (1.0) P (0.1) R (0.01) S (0.001) G (1.0) B (0.1) C (0.01) D (0.001) volts 20 20 F 150 180 percent 20 10 A 20 20 A 200 200 A 250 250 percent 8 8 D D 0162- 0163- 0262- 0263- 0362- 0263- 0462- 0463- 5062- 5063- 2062- 2063- 3062- 3063- 40

28、62- 4063- 35 35 35 35 35 35 35 35 35 35 35 35 1.8 8.2 10 10 33 33 39 47 47 56 68 68 10 10 10 20 10 20 10 10 20 10 10 20 1 3.5 4 4 10 10 10 10 10 15 15 15 10 35 40 40 100 100 100 100 100 150 150 150 12.5 44 50 50 125 125 125 125 125 188 188 188 4 6 6 6 6 6 6 6 6 6 6 6 A B B B C C C C C D D D 0164- 01

29、65- 0166- 0167- 0168- 0169- 0170- 0171- 0172- 0173- 0174- 0175- 0264- 0265- 0266- 0267- 0268- 0269- 0270- 0271- 0272- 0273- 0274- 0275- 0364- 0365- 0366- 0367- 0368- 0369- 0370- 0371- 0372- 0373- 0374- 0375- 0464- 0465- 0466- 0467- 0468- 0469- 0470- 0471- 0472- 0473- 0474- 0475- 5064- 5065- 5066- 50

30、67- 5068- 5069- 5070- 5071- 5072- 5073- 5074- 5075- 2064- 2065- 2066- 2067- 2068- 2069- 2070- 2071- 2072- 2073- 2074- 2075- 3064- 3065- 3066- 3067- 3068- 3069- 3070- 3071- 3072- 3073- 3074- 3075- 4064- 4065- 4066- 4067- 4068- 4069- 4070- 4071- 4072- 4073- 4074- 4075- 50 50 50 50 50 50 50 50 50 50 50

31、 50 1.2 1.5 1.5 5.6 6.8 6.8 22 22 27 33 33 39 10 10 20 10 10 20 10 20 10 10 20 10 0.9 1.2 1.2 4.5 4.5 4.5 10 10 10 10 10 10 9 12 12 45 45 45 100 100 100 100 100 100 11 15 15 56 56 56 125 125 125 125 125 125 4 4 4 4 6 6 6 6 6 6 6 6 A A A B B B C C C D D D 0176- 0177- 0178- 0179- 0180- 0181- 0182- 018

32、3- 0184- 0185- 0186- 0187- 0276- 0277- 0278- 0279- 0280- 0281- 0282- 0283- 0284- 0285- 0286- 0287- 0376- 0377- 0378- 0379- 0380- 0381- 0382- 0383- 0384- 0385- 0386- 0387- 0476- 0477- 0478- 0479- 0480- 0481- 0482- 0483- 0484- 0485- 0486- 0487- 5076- 5077- 5078- 5079- 5080- 5081- 5082- 5083- 5084- 508

33、5- 5086- 5087- 2076- 2077- 2078- 2079- 2080- 2081- 2082- 2083- 2084- 2085- 2086- 2087- 3076- 3077- 3078- 3079- 3080- 3081- 3082- 3083- 3084- 3085- 3086- 3087- 4076- 4077- 4078- 4079- 4080- 4081- 4082- 4083- 4084- 4085- 4086- 4087- 1/ Dash number shall include a letter that indicates user preference

34、for surge current/high temperature solder or the dash will be deleted. MIL-PRF-39003/3J5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39003/3J 6 REQUIREMENTS - Continued. Stability at low and high temperatures: In accordance with MIL-PRF-39

35、003. Step 1 (+25C): DCL: See table I. Capacitance: Within tolerance of table I value. DF: See table I. Step 2 (-55C): Capacitance : Shall not change more than 10 percent of step 1 measured value. DF: See table I. Step 3 (+25C): DCL: See table I. Capacitance: Shall not change more than 2 percent of s

36、tep 1 measured value. DF: See table I. Step 4 (+85C): DCL: See table I. Capacitance: Shall not change more than 8 percent of step 1 measured value. DF: See table I. Step 5 (+125C): DCL: See table I. Capacitance: Shall not change more than 12 percent of step 1 measured value. DF: See table I. Step 6

37、(+25C): DCL: See table I. Capacitance: Shall not change more than 2 percent of step 1 measured value. DF: See table I. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39003/3J 7 Surge voltage: In accordance with MIL-PRF-39003. DCL: See table

38、I. Capacitance: Shall not change more than 2 percent of initial measured value. DF: See table I. Life: Method 108 of MIL-STD-202. 240, 1,000, and 2,000 hours: At +25C (as applicable): DCL: See table I. Capacitance: Shall not change more than 5 percent of initial measured value. DF: See table I. At +

39、85C: DCL: See table I. At +125C: DCL: See table I. 4,000, 6,000, 8,000, and 10,000 hours (exponential only): At +25C (as applicable): DCL: 200 percent of initial limit. Capacitance: Shall not change more than 10 percent of initial measured value. DF: See table I. At +85C: DCL: 200 percent of initial

40、 limit. At +125C: DCL: 200 percent of initial limit. Marking: In accordance with MIL-PRF-39003. Part or Identifying Number (PIN): M39003/03- (dash number from table I). Substitutability data: Substitutability for failure rate levels and capacitance tolerance shall be in accordance with MIL-PRF-39003

41、. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39003/3J 8 Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where modifications from this revision were made. This was done as a conven

42、ience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations. Reference documents. In addition to MIL-PRF-3

43、9003, this specification sheet references the following documents. MIL-STD-202 MIL-STD-1276 Custodians: Preparing activity: Army - CR DLA - CC Navy - EC Air Force - 85 (Project 5910-2012-011) DLA - CC Review activities: Navy - AS, MC, OS, SH Air Force - 19, 99 NOTE: The activities listed above were

44、interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/ . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • DIN 38409-2-1987 German standard methods for the examination of water waste water and sludge parameters characterizing effects and substances (group H) determination of filterable .pdf DIN 38409-2-1987 German standard methods for the examination of water waste water and sludge parameters characterizing effects and substances (group H) determination of filterable .pdf
  • DIN 38409-20-1989 German standard methods for the examination of water waste water and sludge parameters characterizing effects and substances (group H) determination of substances.pdf DIN 38409-20-1989 German standard methods for the examination of water waste water and sludge parameters characterizing effects and substances (group H) determination of substances.pdf
  • DIN 38409-22-2001 German standard methods for the examination of water waste water and sludge - General measures of effects and substances (group H) - Part 22 Determination of diss.pdf DIN 38409-22-2001 German standard methods for the examination of water waste water and sludge - General measures of effects and substances (group H) - Part 22 Determination of diss.pdf
  • DIN 38409-23-2010 German standard methods for the examination of water waste water and sludge - Parameters characterizing effects and substances (group H) - Part 23 Determination o.pdf DIN 38409-23-2010 German standard methods for the examination of water waste water and sludge - Parameters characterizing effects and substances (group H) - Part 23 Determination o.pdf
  • DIN 38409-26-1989 German standard methods for the examination of water waste water and sludge parameters characterizing effects and substances (group H) determination of the bismut.pdf DIN 38409-26-1989 German standard methods for the examination of water waste water and sludge parameters characterizing effects and substances (group H) determination of the bismut.pdf
  • DIN 38409-41-1980 en 5022 German Standard Methods for Examination of Water Waste Water and Sludge Summary Action and Material Characteristic Parameters (Group H) Determination of t.pdf DIN 38409-41-1980 en 5022 German Standard Methods for Examination of Water Waste Water and Sludge Summary Action and Material Characteristic Parameters (Group H) Determination of t.pdf
  • DIN 38409-44-1992 en 5088 German standard methods for the examination of water waste water and sludge parameters characterizing effects and substances (group H) determination of th.pdf DIN 38409-44-1992 en 5088 German standard methods for the examination of water waste water and sludge parameters characterizing effects and substances (group H) determination of th.pdf
  • DIN 38409-46-2012 German standard methods for the examination of water waste water and sludge - Parameters characterizing effects and substances (group H) - Part 46 Determination o.pdf DIN 38409-46-2012 German standard methods for the examination of water waste water and sludge - Parameters characterizing effects and substances (group H) - Part 46 Determination o.pdf
  • DIN 38409-6-1986 German standard methods for the examination of water waste water and sludge summary indices of actions and substances (group H) water hardness (H 6)《德国检验水、废水和污泥的标准.pdf DIN 38409-6-1986 German standard methods for the examination of water waste water and sludge summary indices of actions and substances (group H) water hardness (H 6)《德国检验水、废水和污泥的标准.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1