DLA MIL-PRF-39006 9 G-2010 CAPACITORS FIXED ELECTROLYTIC (NONSOLID ELECTROLYTE) TANTALUM (POLARIZED SINTERED SLUG) 85 DEGREES C (VOLTAGE DERATED TO 125 DEGREES C) ESTABLISHED RELIA.pdf

上传人:confusegate185 文档编号:692859 上传时间:2018-12-30 格式:PDF 页数:27 大小:443.23KB
下载 相关 举报
DLA MIL-PRF-39006 9 G-2010 CAPACITORS FIXED ELECTROLYTIC (NONSOLID ELECTROLYTE) TANTALUM (POLARIZED SINTERED SLUG) 85 DEGREES C (VOLTAGE DERATED TO 125 DEGREES C) ESTABLISHED RELIA.pdf_第1页
第1页 / 共27页
DLA MIL-PRF-39006 9 G-2010 CAPACITORS FIXED ELECTROLYTIC (NONSOLID ELECTROLYTE) TANTALUM (POLARIZED SINTERED SLUG) 85 DEGREES C (VOLTAGE DERATED TO 125 DEGREES C) ESTABLISHED RELIA.pdf_第2页
第2页 / 共27页
DLA MIL-PRF-39006 9 G-2010 CAPACITORS FIXED ELECTROLYTIC (NONSOLID ELECTROLYTE) TANTALUM (POLARIZED SINTERED SLUG) 85 DEGREES C (VOLTAGE DERATED TO 125 DEGREES C) ESTABLISHED RELIA.pdf_第3页
第3页 / 共27页
DLA MIL-PRF-39006 9 G-2010 CAPACITORS FIXED ELECTROLYTIC (NONSOLID ELECTROLYTE) TANTALUM (POLARIZED SINTERED SLUG) 85 DEGREES C (VOLTAGE DERATED TO 125 DEGREES C) ESTABLISHED RELIA.pdf_第4页
第4页 / 共27页
DLA MIL-PRF-39006 9 G-2010 CAPACITORS FIXED ELECTROLYTIC (NONSOLID ELECTROLYTE) TANTALUM (POLARIZED SINTERED SLUG) 85 DEGREES C (VOLTAGE DERATED TO 125 DEGREES C) ESTABLISHED RELIA.pdf_第5页
第5页 / 共27页
点击查看更多>>
资源描述

1、 MIL-PRF-39006/9G SUPERSEDING 2 June 2010 MIL-PRF-39006/9F 9 December 2004 PERFORMANCE SPECIFICATION SHEET CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, (POLARIZED, SINTERED SLUG), 85C (VOLTAGE DERATED TO 125C), ESTABLISHED RELIABILITY, STYLE CLR65 This specification is approved

2、for use by all Depart- ments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this document and MIL-PRF-39006. NOTE: The above entry consolidates all previous specification action concerning inactivation. Failure rate level “L“ w

3、as made inactive for new design on 27 May 1976. All other failure rate levels were inactivated by Notice 1 and 2 dated 9 October 1981 and 11 June 1982, respectively. FIGURE 1. Style CLR65 capacitors. AMSC N/A FSC 5910 INCH-POUND +-+INACTIVE FOR NEW DESIGN AFTER 23 JUNE 1981. FOR NEW DESIGN, USE MIL-

4、PRF-39006/22. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39006/9G 2 Case size Dimensions Basic case Insulated case E .250 (6.35) L 1/ +.031 (0.79) -.016 (0.41) D .016 (0.41) D max T1 T2 T3 T4 .453 (11.51) .641 (16.28) .766 (19.46) 1.062

5、(26.97) 2/ .188 (4.78) .281 (7.14) .375 (9.53) .375 (9.53) .219 ( 5.56) .312 ( 7.92) .406 (10.31) .406 (10.31) 1.500 (38.10) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 1/ Length of basic case; sleeving shall be as specified in MIL-PRF-39006. 2/ For the T4 case size only, the negative L dimension tole

6、rance is -.023 (0.58). NOTES: 1. Dimensions are in inches. 2. Metric equivalents are in parentheses. 3. Metric equivalents (to the nearest 0.01 mm) are given for general information only and are based upon 1 inch = 25.4 mm. 4. The weld shall not be enclosed in the end seal. FIGURE 1. Style CLR65 cap

7、acitors- Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Capacitor characteristics. Rated voltage (+85C) volts, dc Cap. 1/ F Cap. toler-ance percent DC leakage (max) Dissi-pation factor (max) percent Derated voltage (+125C) volts,

8、 dc Surge voltage (+85C) volts, dc Imped- ance (max) ohms Capacitance change at Case size PIN M39006/09- Failure rate level (%/1,000 hour) +25C +85C & A +125C -55C A +85C percent +125C percent percent L (2.0) M (1.0) P (0.1) R (0.01) S (0.001) 6 30 20 1 2 9.1 4 6.9 100 -40 +10.5 +12 T1 8001 8206 841

9、1 8616 8821 6 30 10 1 2 9.1 4 6.9 100 -40 +10.5 +12 T1 8002 8207 8412 8617 8822 6 30 5 1 2 9.1 4 6.9 100 -40 +10.5 +12 T1 8003 8208 8413 8618 8823 6 *68 20 1 2 20.4 4 6.9 60 -40 +14 +16 T1 8004 8209 8414 8619 8824 6 *68 10 1 2 20.4 4 6.9 60 -40 +14 +16 T1 8005 8210 8415 8620 8825 6 *68 5 1 2 20.4 4

10、6.9 60 -40 +14 +16 T1 8006 8211 8416 8621 8826 6 140 20 1 3 21.3 4 6.9 40 -40 +14 +16 T2 8007 8212 8417 8622 8827 6 140 10 1 3 21.3 4 6.9 40 -40 +14 +16 T2 8008 8213 8418 8623 8828 6 140 5 1 3 21.3 4 6.9 40 -40 +14 +16 T2 8009 8214 8419 8624 8829 6 270 20 1 6.5 81.8 4 6.9 25 -44 +17.5 +20 T2 8010 82

11、15 8420 8625 8830 6 270 10 1 6.5 81.8 4 6.9 25 -44 +17.5 +20 T2 8011 8216 8421 8626 8831 6 270 5 1 6.5 81.8 4 6.9 25 -44 +17.5 +20 T2 8012 8217 8422 8627 8832 6 330 20 2 7.9 49.6 4 6.9 20 -44 +14 +16 T3 8013 8218 8423 8628 8833 6 330 10 2 7.9 49.6 4 6.9 20 -44 +14 +16 T3 8014 8219 8424 8629 8834 6 3

12、30 5 2 7.9 49.6 4 6.9 20 -44 +14 +16 T3 8015 8220 8425 8630 8835 6 560 20 2 13 128.0 4 6.9 25 -64 +17.5 +20 T3 8016 8221 8426 8631 8836 6 560 10 2 13 128.0 4 6.9 25 -64 +17.5 +20 T3 8017 8222 8427 8632 8837 6 560 5 2 13 128.0 4 6.9 25 -64 +17.5 +20 T3 8018 8223 8428 8633 8838 6 1200 20 3 14 144.4 4

13、6.9 20 -80 +25 +25 T4 8019 8224 8429 8634 8839 6 1200 10 3 14 144.4 4 6.9 20 -80 +25 +25 T4 8020 8225 8430 8635 8840 8 25 20 1 2 7.6 5 9.2 100 -40 +10.5 +12 T1 8021 8226 8431 8636 8841 8 25 10 1 2 7.6 5 9.2 100 -40 +10.5 +12 T1 8022 8227 8432 8637 8842 8 25 5 1 2 7.6 5 9.2 100 -40 +10.5 +12 T1 8023

14、8228 8433 8638 8843 8 56 20 1 2 17.0 5 9.2 59 -40 +14 +16 T1 8024 8229 8434 8639 8844 8 56 10 1 2 17.0 5 9.2 59 -40 +14 +16 T1 8025 8230 8435 8640 8845 8 56 5 1 2 17.0 5 9.2 59 -40 +14 +16 T1 8026 8231 8436 8641 8846 8 220 20 1 7 66.4 5 9.2 30 -44 +17.5 +20 T2 8027 8232 8437 8642 8847 8 220 10 1 7 6

15、6.4 5 9.2 30 -44 +17.5 +20 T2 8028 8233 8438 8643 8848 8 220 5 1 7 66.4 5 9.2 30 -44 +17.5 +20 T2 8029 8234 8439 8644 8849 8 430 20 2 14 91.5 5 9.2 25 -64 +17.5 +20 T3 8030 8235 8440 8645 8850 8 430 10 2 14 91.5 5 9.2 25 -64 +17.5 +20 T3 8031 8236 8441 8646 8851 8 430 5 2 14 91.5 5 9.2 25 -64 +17.5

16、+20 T3 8032 8237 8442 8647 8852 8 850 20 4 16 65.8 5 9.2 22 -80 +25 +25 T4 8033 8238 8443 8648 8853 8 850 10 4 16 65.8 5 9.2 22 -80 +25 +25 T4 8034 8239 8444 8649 8854 10 20 20 1 2 6.1 7 11.5 175 -32 +10.5 +12 T1 8035 8240 8445 8650 8855 10 20 10 1 2 6.1 7 11.5 175 -32 +10.5 +12 T1 8036 8241 8446 86

17、51 8856 10 20 5 1 2 6.1 7 11.5 175 -32 +10.5 +12 T1 8037 8242 8447 8652 8857 See footnotes at end of table. MIL-PRF-39006/9G3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Capacitor characteristics- Continued. Rated voltage (+85C) volts, dc

18、 Cap. 1/ F Cap. toler-ance percent DC leakage (max) Dissi-pation factor (max) percent Derated voltage (+125C) volts, dc Surge voltage (+85C) volts, dc Imped- ance (max) ohms Capacitance change at Case size PIN M39006/09- Failure rate level (%/1,000 hour) +25C +85C & A +125C -55C A +85C percent +125C

19、 percent percent L (2.0) M (1.0) P (0.1) R (0.01) S (0.001) 10 47 20 1 2 18.1 7 11.5 100 -36 +14 +16 T1 8038 8243 8448 8653 8858 10 47 10 1 2 18.1 7 11.5 100 -36 +14 +16 T1 8039 8244 8449 8654 8859 10 47 5 1 2 18.1 7 11.5 100 -36 +14 +16 T1 8040 8245 8450 8655 8860 10 100 20 1 4 15.2 7 11.5 60 -36 +

20、14 +16 T2 8041 8246 8451 8656 8861 10 100 10 1 4 15.2 7 11.5 60 -36 +14 +16 T2 8042 8247 8452 8657 8862 10 100 5 1 4 15.2 7 11.5 60 -36 +14 +16 T2 8043 8248 8453 8658 8863 10 180 20 1 7 54.4 7 11.5 40 -36 +14 +16 T2 8044 8249 8454 8659 8864 10 180 10 1 7 54.4 7 11.5 40 -36 +14 +16 T2 8045 8250 8455

21、8660 8865 10 180 5 1 7 54.4 7 11.5 40 -36 +14 +16 T2 8046 8251 8456 8661 8866 10 250 20 2 10 37.8 7 11.5 30 -40 +14 +16 T3 8047 8252 8457 8662 8867 10 250 10 2 10 37.8 7 11.5 30 -40 +14 +16 T3 8048 8253 8458 8663 8868 10 250 5 2 10 37.8 7 11.5 30 -40 +14 +16 T3 8049 8254 8459 8664 8869 10 390 20 2 1

22、6 87.6 7 11.5 25 -64 +17.5 +20 T3 8050 8255 8460 8665 8870 10 390 10 2 16 87.6 7 11.5 25 -64 +17.5 +20 T3 8051 8256 8461 8666 8871 10 390 5 2 16 87.6 7 11.5 25 -64 +17.5 +20 T3 8052 8257 8462 8667 8872 10 750 20 4 16 56.5 7 11.5 23 -80 +25 +25 T4 8053 8258 8463 8668 8873 10 750 10 4 16 56.5 7 11.5 2

23、3 -80 +25 +25 T4 8054 8259 8464 8669 8874 15 15 20 1 2 5.7 10 17.2 155 -24 +10.5 +12 T1 8055 8260 8465 8670 8875 15 15 10 1 2 5.7 10 17.2 155 -24 +10.5 +12 T1 8056 8261 8466 8671 8876 15 15 5 1 2 5.7 10 17.2 155 -24 +10.5 +12 T1 8057 8262 8467 8672 8877 15 33 20 1 2 12.5 10 17.2 90 -28 +14 +16 T1 80

24、58 8263 8468 8673 8878 15 33 10 1 2 12.5 10 17.2 90 -28 +14 +16 T1 8059 8264 8469 8674 8879 15 33 5 1 2 12.5 10 17.2 90 -28 +14 +16 T1 8060 8265 8470 8675 8880 15 70 20 1 4 13.1 10 17.2 75 -28 +14 +16 T2 8061 8266 8471 8676 8881 15 70 10 1 4 13.1 10 17.2 75 -28 +14 +16 T2 8062 8267 8472 8677 8882 15

25、 70 5 1 4 13.1 10 17.2 75 -28 +14 +16 T2 8063 8268 8473 8678 8883 15 120 20 1 7 36.8 10 17.2 50 -28 +17.5 +20 T2 8064 8269 8474 8679 8884 15 120 10 1 7 36.8 10 17.2 50 -28 +17.5 +20 T2 8065 8270 8475 8680 8885 15 120 5 1 7 36.8 10 17.2 50 -28 +17.5 +20 T2 8066 8271 8476 8681 8886 15 170 20 2 10 25.4

26、 10 17.2 35 -32 +14 +16 T3 8067 8272 8477 8682 8887 15 170 10 2 10 25.4 10 17.2 35 -32 +14 +16 T3 8068 8273 8478 8683 8888 15 170 5 2 10 25.4 10 17.2 35 -32 +14 +16 T3 8069 8274 8479 8684 8889 15 270 20 2 16 60.9 10 17.2 30 -56 +17.5 +20 T3 8070 8275 8480 8685 8890 15 270 10 2 16 60.9 10 17.2 30 -56

27、 +17.5 +20 T3 8071 8276 8481 8686 8891 15 270 5 2 16 60.9 10 17.2 30 -56 +17.5 +20 T3 8072 8277 8482 8687 8892 15 540 20 6 24 49.0 10 17.2 23 -80 +25 +25 T4 8073 8278 8483 8688 8893 15 540 10 6 24 49.0 10 17.2 23 -80 +25 +25 T4 8074 8279 8484 8689 8894 See footnotes at end of table. MIL-PRF-39006/9G

28、4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Capacitor characteristics- Continued. Rated voltage (+85C) volts, dc Cap. 1/ F Cap. toler-ance percent DC leakage (max) Dissi-pation factor (max) percent Derated voltage (+125C) volts, dc Surg

29、e voltage (+85C) volts, dc Imped- ance (max) ohms Capacitance change at Case size PIN M39006/09- Failure rate level (%/1,000 hour) +25C +85C & A +125C -55C A +85C percent +125C percent percent L (2.0) M (1.0) P (0.1) R (0.01) S (0.001) 25 10 20 1 2 4.6 15 28.8 220 -16 +8 +9 T1 8075 8280 8485 8690 88

30、95 25 10 10 1 2 4.6 15 28.8 220 -16 +8 +9 T1 8076 8281 8486 8691 8896 25 10 5 1 2 4.6 15 28.8 220 -16 +8 +9 T1 8077 8282 8487 8692 8897 25 22 20 1 2 8.3 15 28.8 140 -20 +10.5 +12 T1 8078 8283 8488 8693 8898 25 22 10 1 2 8.3 15 28.8 140 -20 +10.5 +12 T1 8079 8284 8489 8694 8899 25 22 5 1 2 8.3 15 28.

31、8 140 -20 +10.5 +12 T1 8080 8285 8490 8695 8900 25 100 20 1 10 31.4 15 28.8 50 -28 +13 +15 T2 8081 8286 8491 8696 8901 25 100 10 1 10 31.4 15 28.8 50 -28 +13 +15 T2 8082 8287 8492 8697 8902 25 100 5 1 10 31.4 15 28.8 50 -28 +13 +15 T2 8083 8288 8493 8698 8903 25 180 20 2 18 54.3 15 28.8 32 -48 +13 +

32、15 T3 8084 8289 8494 8699 8904 25 180 10 2 18 54.3 15 28.8 32 -48 +13 +15 T3 8085 8290 8495 8700 8905 25 180 5 2 18 54.3 15 28.8 32 -48 +13 +15 T3 8086 8291 8496 8701 8906 25 350 20 7 28 35.0 15 28.8 24 -70 +25 +25 T4 8087 8292 8497 8702 8907 25 350 10 7 28 35.0 15 28.8 24 -70 +25 +25 T4 8088 8293 8

33、498 8703 8908 30 8 20 1 2 4.5 20 34.5 275 -16 +8 +12 T1 8089 8294 8499 8704 8909 30 8 10 1 2 4.5 20 34.5 275 -16 +8 +12 T1 8090 8295 8500 8705 8910 30 8 5 1 2 4.5 20 34.5 275 -16 +8 +12 T1 8091 8296 8501 8706 8911 30 15 20 1 2 9.1 20 34.5 175 -20 +10.5 +12 T1 8092 8297 8502 8707 8912 30 15 10 1 2 9.

34、1 20 34.5 175 -20 +10.5 +12 T1 8093 8298 8503 8708 8913 30 15 5 1 2 9.1 20 34.5 175 -20 +10.5 +12 T1 8094 8299 8504 8709 8914 30 40 20 1 5 12.2 20 34.5 65 -24 +10.5 +12 T2 8095 8300 8505 8710 8915 30 40 10 1 5 12.2 20 34.5 65 -24 +10.5 +12 T2 8096 8301 8506 8711 8916 30 40 5 1 5 12.2 20 34.5 65 -24

35、+10.5 +12 T2 8097 8302 8507 8712 8917 30 68 20 1 8 31.0 20 34.5 60 -24 +13 +15 T2 8098 8303 8508 8713 8918 30 68 10 1 8 31.0 20 34.5 60 -24 +13 +15 T2 8099 8304 8509 8714 8919 30 68 5 1 8 31.0 20 34.5 60 -24 +13 +15 T2 8100 8305 8510 8715 8920 30 100 20 2 12 19.0 20 34.5 40 -28 +10.5 +12 T3 8101 830

36、6 8511 8716 8921 30 100 10 2 12 19.0 20 34.5 40 -28 +10.5 +12 T3 8102 8307 8512 8717 8922 30 100 5 2 12 19.0 20 34.5 40 -28 +10.5 +12 T3 8103 8308 8513 8718 8923 30 150 20 2 18 46.0 20 34.5 35 -48 +13 +15 T3 8104 8309 8514 8719 8924 30 150 10 2 18 46.0 20 34.5 35 -48 +13 +15 T3 8105 8310 8515 8720 8

37、925 30 150 5 2 18 46.0 20 34.5 35 -48 +13 +15 T3 8106 8311 8516 8721 8926 30 300 20 8 32 35.0 20 34.5 25 -60 +25 +25 T4 8107 8312 8517 8722 8927 30 300 10 8 32 35.0 20 34.5 25 -60 +25 +25 T4 8108 8313 8518 8723 8928 50 5 20 1 2 3.4 30 57.5 400 -16 +5 +6 T1 8109 8314 8519 8724 8929 50 5 10 1 2 3.4 30

38、 57.5 400 -16 +5 +6 T1 8110 8315 8520 8725 8930 50 5 5 1 2 3.4 30 57.5 400 -16 +5 +6 T1 8111 8316 8521 8726 8931 See footnotes at end of table. MIL-PRF-39006/9G5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Capacitor characteristics- Conti

39、nued. Rated voltage (+85C) volts, dc Cap. 1/ F Cap. toler-ance percent DC leakage (max) Dissi-pation factor (max) percent Derated voltage (+125C) volts, dc Surge voltage (+85C) volts, dc Imped- ance (max) ohms Capacitance change at Case size PIN M39006/09- Failure rate level (%/1,000 hour) +25C +85C

40、 & A +125C -55C A +85C percent +125C percent percent L (2.0) M (1.0) P (0.1) R (0.01) S (0.001) 50 10 20 1 2 6.0 30 57.5 250 -24 +8 +9 T1 8112 8317 8522 8727 8932 50 10 10 1 2 6.0 30 57.5 250 -24 +8 +9 T1 8113 8318 8523 8728 8933 50 10 5 1 2 6.0 30 57.5 250 -24 +8 +9 T1 8114 8319 8524 8729 8934 50 2

41、5 20 1 5 11.2 30 57.5 95 -20 +10.5 +12 T2 8115 8320 8525 8730 8935 50 25 10 1 5 11.2 30 57.5 95 -20 +10.5 +12 T2 8116 8321 8526 8731 8936 50 25 5 1 5 11.2 30 57.5 95 -20 +10.5 +12 T2 8117 8322 8527 8732 8937 50 47 20 1 9 21.4 30 57.5 70 -28 +13 +15 T2 8118 8323 8528 8733 8938 50 47 10 1 9 21.4 30 57

42、.5 70 -28 +13 +15 T2 8119 8324 8529 8734 8939 50 47 5 1 9 21.4 30 57.5 70 -28 +13 +15 T2 8120 8325 8530 8735 8940 50 60 20 2 12 13.6 30 57.5 45 -16 +10.5 +12 T3 8121 8326 8531 8736 8941 50 60 10 2 12 13.6 30 57.5 45 -16 +10.5 +12 T3 8122 8327 8532 8737 8942 50 60 5 2 12 13.6 30 57.5 45 -16 +10.5 +12

43、 T3 8123 8328 8533 8738 8943 50 82 20 2 16 24.9 30 57.5 45 -32 +13 +15 T3 8124 8329 8534 8739 8944 50 82 10 2 16 24.9 30 57.5 45 -32 +13 +15 T3 8125 8330 8535 8740 8945 50 82 5 2 16 24.9 30 57.5 45 -32 +13 +15 T3 8126 8331 8536 8741 8946 50 160 20 8 32 25.7 30 57.5 27 -50 +25 +25 T4 8127 8332 8537 8

44、742 8947 50 160 10 8 32 25.7 30 57.5 27 -50 +25 +25 T4 8128 8333 8538 8743 8948 60 4 20 1 2 3.0 40 69.0 550 -16 +5 +6 T1 8129 8334 8539 8744 8949 60 4 10 1 2 3.0 40 69.0 550 -16 +5 +6 T1 8130 8335 8540 8745 8950 60 4 5 1 2 3.0 40 69.0 550 -16 +5 +6 T1 8131 8336 8541 8746 8951 60 8.2 20 1 2 5.0 40 69

45、.0 275 -24 +8 +9 T1 8132 8337 8542 8747 8952 60 8.2 10 1 2 5.0 40 69.0 275 -24 +8 +9 T1 8133 8338 8543 8748 8953 60 8.2 5 1 2 5.0 40 69.0 275 -24 +8 +9 T1 8134 8339 8544 8749 8954 60 20 20 1 5 7.6 40 69.0 105 -16 +10.5 +12 T2 8135 8340 8545 8750 8955 60 20 10 1 5 7.6 40 69.0 105 -16 +10.5 +12 T2 813

46、6 8341 8546 8751 8956 60 20 5 1 5 7.6 40 69.0 105 -16 +10.5 +12 T2 8137 8342 8547 8752 8957 60 39 20 1 9 20.7 40 69.0 90 -28 +10.5 +12 T2 8138 8343 8548 8753 8958 60 39 10 1 9 20.7 40 69.0 90 -28 +10.5 +12 T2 8139 8344 8549 8754 8959 60 39 5 1 9 20.7 40 69.0 90 -28 +10.5 +12 T2 8140 8345 8550 8755 8

47、960 60 50 20 2 12 15.3 40 69.0 50 -16 +10.5 +12 T3 8141 8346 8551 8756 8961 60 50 10 2 12 15.3 40 69.0 50 -16 +10.5 +12 T3 8142 8347 8552 8757 8962 60 50 5 2 12 15.3 40 69.0 50 -16 +10.5 +12 T3 8143 8348 8553 8758 8963 60 68 20 2 16 30.7 40 69.0 50 -32 +10.5 +12 T3 8144 8349 8554 8759 8964 60 68 10 2 16 30.7 40 69.0 50 -32 +10.5 +12 T3 8145 8350 8555 8760 8965 60 68 5 2 16 30.7 40 69.0 50 -32 +10.5 +12 T3 8146 8351 8556 8761 8966 60 140 20 8 32 25.7 40 69.0 2

展开阅读全文
相关资源
猜你喜欢
  • BS 6783-10-1990 Sampling and analysis of nickel ferronickel and nickel alloys - Method for determination of iron in nickel alloys (titrimetric method using potassium dichromate)《镍、.pdf BS 6783-10-1990 Sampling and analysis of nickel ferronickel and nickel alloys - Method for determination of iron in nickel alloys (titrimetric method using potassium dichromate)《镍、.pdf
  • BS 6783-12-1992 Sampling and analysis of nickel ferronickel and nickel alloys - Method for the determination of phosphorus in nickel alloys by molybdenum blue molecular absorption .pdf BS 6783-12-1992 Sampling and analysis of nickel ferronickel and nickel alloys - Method for the determination of phosphorus in nickel alloys by molybdenum blue molecular absorption .pdf
  • BS 6783-13-1992 Sampling and analysis of nickel ferronickel and nickel alloys - Method for the determination of phosphorus in nickel ferronickel and nickel alloys by phosphovanadom.pdf BS 6783-13-1992 Sampling and analysis of nickel ferronickel and nickel alloys - Method for the determination of phosphorus in nickel ferronickel and nickel alloys by phosphovanadom.pdf
  • BS 6783-14-1994 Sampling and analysis of nickel ferronickel and nickel alloys - Method for the determination of total boron content of nickel and nickel alloys by curcumin molecula.pdf BS 6783-14-1994 Sampling and analysis of nickel ferronickel and nickel alloys - Method for the determination of total boron content of nickel and nickel alloys by curcumin molecula.pdf
  • BS 6783-15-1994 Sampling and analysis of nickel ferronickel and nickel alloys - Method for the determination of titanium in nickel alloys by diantipyrylmethane molecular absorption.pdf BS 6783-15-1994 Sampling and analysis of nickel ferronickel and nickel alloys - Method for the determination of titanium in nickel alloys by diantipyrylmethane molecular absorption.pdf
  • BS 6783-2-1986 Sampling and analysis of nickel ferronickel and nickel alloys - Method for determination of nickel in ferronickel (dimethylglyoxime gravimetric method)《镍、镍铁和镍的合金取样与分.pdf BS 6783-2-1986 Sampling and analysis of nickel ferronickel and nickel alloys - Method for determination of nickel in ferronickel (dimethylglyoxime gravimetric method)《镍、镍铁和镍的合金取样与分.pdf
  • BS 6783-3-1986 Sampling and analysis of nickel ferronickel and nickel alloys - Method for determination of cobalt in ferronickel by flame atomic absorption spectrometry《镍、镍铁和镍合金的取样.pdf BS 6783-3-1986 Sampling and analysis of nickel ferronickel and nickel alloys - Method for determination of cobalt in ferronickel by flame atomic absorption spectrometry《镍、镍铁和镍合金的取样.pdf
  • BS 6783-4-1986 Sampling and analysis of nickel ferronickel and nickel alloys - Method for determination of silver arsenic bismuth cadmium lead antimony selenium tin tellurium and t.pdf BS 6783-4-1986 Sampling and analysis of nickel ferronickel and nickel alloys - Method for determination of silver arsenic bismuth cadmium lead antimony selenium tin tellurium and t.pdf
  • BS 6783-5-1986 Sampling and analysis of nickel ferronickel and nickel alloys - Method for determination of carbon in nickel ferronickel and nickel alloys by infra-red absorption af.pdf BS 6783-5-1986 Sampling and analysis of nickel ferronickel and nickel alloys - Method for determination of carbon in nickel ferronickel and nickel alloys by infra-red absorption af.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1