1、 MIL-PRF-39018/2F 20 February 2009 SUPERSEDING MIL-PRF-39018/2E 20 March 2007 PERFORMANCE SPECIFICATION SHEET CAPACITORS, FIXED, ELECTROLYTIC (ALUMINUM OXIDE)(NONPOLARIZED), STYLES CU14 (UNINSULATED) AND CU15 (INSULATED) This specification is approved for use by all Depart- ments and Agencies of the
2、 Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-PRF-39018. FIGURE 1. Styles CU14 and CU15 capacitors. AMSC N/A FSC 5910 INCH-POUND STYLE CU14 INACTIVE FOR DESIGN AFTER 23 MARCH 1972 Provided by IHSNot for ResaleNo
3、reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39018/2F 2 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. These capacitors are not intended to be mounted by their leads. 4. There is an indeterminate resistance between te
4、rminal and case. Optional configuration may allow that one lead be connected to the case (single ended construction). 5. The “B” dimension for style CU15 shall not be more than .008 (0.20 mm) larger than the specified bare case diameter. FIGURE 1. Styles CU14 and CU15 capacitorsCase size - Continued
5、. Dimensions A .031 B .015 See note 5 A0 A7 A8 A9 .938 1.438 2.125 2.750 .281 .375 .375 .375 Inches mm Inches mm .002 0.05 .281 7.14 .008 0.20 .375 9.52 .015 0.38 .938 23.83 .031 0.79 1.438 36.53 .032 0.81 1.500 38.10 .140 3.56 2.125 53.97 .250 6.35 2.750 69.85 Provided by IHSNot for ResaleNo reprod
6、uction or networking permitted without license from IHS-,-,-MIL-PRF-39018/2F 3 REQUIREMENTS: Dimensions and configuration: See figure 1. Case: Type - Tubular. Material - Metal. Leads - See figure 1. DC rated voltage: See table I. Capacitance value: See table I. Capacitance tolerance: See table I. Op
7、erating temperature: -55C to +85C derated to +125C (see table I). DC leakage: See table I. Equivalent series resistance (ESR): See table I. Low temperature exposure: DCL - See table I. C - See table I. ESR - See table I. Solderability: In accordance with MIL-PRF-39018. Terminal strength: Method 211
8、of MIL-STD-202, test condition A (3 pounds) and test condition D (3 rotations). Stability at reduced and high temperature: Step 1 (at +25C): DCL - See table I. C - See table I. ESR - See table I. Step 2 (at -55C): Impedance: See table I. C - Within 30 percent of step 1 value. Step 3 (at +25C): DCL -
9、 See table I. C - Within 5 percent of step 1 value. ESR - See table I. Step 4 (at +125C): DCL - See table I. C - Within 25 percent of step 1 value. ESR - See table I. Step 5 (at +25C): DCL - See table I. C - Within 5 percent of step 1 value. ESR - See table I. Provided by IHSNot for ResaleNo reprodu
10、ction or networking permitted without license from IHS-,-,-MIL-PRF-39018/2F 4 TABLE I. Styles CU14 and CU15 capacitorsDC rated voltage . Cap. DC surge voltage ESR Max. Imped. at -55C and 120 Hz DC leakage Case size Dash number Style CU14 Dash number Style CU15 Capacitance tolerance Percent Capacitan
11、ce tolerance Percent +85C +125C +85C +125C +25C +85C and +125C +25C +85C and +125C -10 +30 -10 +50 -10 +75 -10 +30 -10 +50 -10 +75 volts F volts A 7 7 7 7 5 5 5 5 47 220 470 680 10 10 10 10 7 7 7 7 5.64 1.21 0.56 0.39 7.05 1.51 0.71 0.49 64 14 6.4 4.4 4 10 16 24 12 30 48 72 A0 A7 A8 A9 0401 0402 040
12、3 0404 - - - - 0501 0502 0503 0504 0601 0602 0603 0604 - - - - 0701 0702 0703 0704 10 10 10 10 7 7 7 7 39 180 330 470 15 15 15 15 10 10 10 10 6.80 1.47 0.80 0.56 8.50 1.84 1.00 0.71 77 17 9.1 6.4 4 10 16 24 12 30 48 72 A0 A7 A8 A9 0405 0406 0407 0408 - - - - 0505 0506 0507 0508 0605 0606 0607 0608 -
13、 - - - 0705 0706 0707 0708 15 15 15 15 15 10 10 10 10 10 33 120 150 270 390 20 20 20 20 20 15 15 15 15 15 8.04 2.21 1.77 0.98 0.68 10.05 2.76 2.21 1.23 0.85 91 25 20 11 7.7 4 9 10 16 24 12 27 30 48 72 A0 A7 A7 A8 A9 0409 0410 0411 0412 0413 - - - - - 0509 0510 0511 0512 0513 0609 0610 0611 0612 0613
14、 - - - - - 0709 0710 0711 0712 0713 30 30 30 30 30 30 20 20 20 20 20 20 15 56 68 120 150 180 40 40 40 40 40 40 30 30 30 30 30 30 17.68 4.74 3.90 2.21 1.77 1.47 22.10 5.92 4.88 2.76 2.21 1.84 130 36 30 17 13 11 5 9 10 15 16 24 15 27 30 45 48 72 A0 A7 A7 A8 A8 A9 0414 0415 0416 0417 0418 0419 - - - -
15、- - 0514 0515 0516 0517 0518 0519 0614 0615 0616 0617 0618 0619 - - - - - - 0714 0715 0716 0717 0718 0719 50 50 50 50 40 40 40 40 6.8 27 56 82 60 60 60 60 50 50 50 50 19.50 4.91 2.37 1.62 39.01 9.82 4.74 3.23 300 74 36 23 6 10 16 24 18 30 48 72 A0 A7 A8 A9 0420 0421 0422 0423 - - - - 0520 0521 0522
16、0523 0620 0621 0622 0623 - - - - 0720 0721 0722 0723 75 75 75 75 75 60 60 60 60 60 3.9 15 18 39 56 90 90 90 90 90 75 75 75 75 75 34.01 8.84 7.37 3.40 2.37 68.01 17.68 14.74 6.80 4.74 510 130 110 51 36 7 10 11 16 24 21 30 33 48 72 A0 A7 A7 A8 A9 0424 0425 0426 0427 0428 - - - - - 0524 0525 0526 0527
17、0528 0624 0625 0626 0627 0628 - - - - - 0724 0725 0726 0727 0728 100 100 100 100 75 75 75 75 2.2 12 22 33 125 125 125 125 100 100 100 100 60.29 11.05 6.03 4.02 120.57 22.10 12.06 8.04 910 170 91 61 8 16 18 28 12 48 54 84 A0 A7 A8 A9 0429 0430 0431 0432 0529 0530 0531 0532 - - - - 0629 0630 0631 0632
18、 0729 0730 0731 0732 - - - - 150 150 150 150 150 150 100 100 100 100 100 100 1.8 5.6 8.2 12 15 22 175 175 175 175 175 175 125 125 125 125 125 125 73.68 23.68 16.17 11.05 8.84 6.03 147.37 47.37 32.35 22.10 17.68 12.06 1100 360 230 170 130 91 10 14 16 18 20 28 30 42 48 54 60 84 A0 A7 A7 A8 A8 A9 0433
19、0434 0435 0436 0437 0438 0533 0534 0435 0536 0537 0538 - - - - - - 0633 0634 0635 0636 0637 0638 0733 0734 0735 0736 0737 0738 - - - - - - 200 200 200 200 150 150 150 150 1.0 4.7 10 15 225 225 225 225 175 175 175 175 132.63 28.22 13.26 8.84 265.26 56.44 26.53 17.68 2000 400 200 130 12 20 24 32 36 60
20、 72 96 A0 A7 A8 A9 0439 0440 0441 0442 0539 0540 0541 0542 - - - - 0639 0640 0641 0642 0739 0740 0741 0742 - - - - 250 250 250 250 200 200 200 200 0.68 3.3 6.8 10 275 275 275 275 225 225 225 225 290.00 40.19 19.50 13.26 390.09 80.38 39.01 26.53 3000 610 300 200 14 22 26 36 42 66 78 108 A0 A7 A8 A9 0
21、443 0444 0445 0446 0543 0544 0545 0546 - - - - 0643 0644 0645 0646 0743 0744 0745 0746 - - - - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39018/2F 5 Life: Method 108 of MIL-STD-202. For qualification: Condition F (2,000 hours) at +85C. D
22、CL -: See table I. C - Within 15 percent of initial measured value. ESR Not more than 130 percent of initial requirement. For conformance: Performance check, condition B (250 hours) at +85C. DCL -: See table I. C - Within 10 percent of initial measured value. ESR - See table I. For conformance: Cont
23、inuation test (1,750 hours) at +85C. DCL - See table I. C - Within 15 percent of initial measured value. ESR - Not more than 130 percent of initial requirement. Vibration: * High frequency: In accordance with MIL-PRF-39018. Thermal shock and immersion: Thermal shock: Method 107 of MIL-STD-202, condi
24、tion A, except that in step 3 units shall be tested at the applicable high temperature. Immersion: Method 104 of MIL-STD-202, condition B (2 cycles, 30 minutes). DCL: See table I. C: Within 5 percent of initial measured value. ESR: See table I. Insulation resistance of sleeve: Not less than 100 mego
25、hms. Surge voltage: DCL: See table I. C: Within 6 percent of initial measured value. ESR: See table I. Moisture resistance: Method 106 of MIL-STD-202. DCL: See table I. C: Within 6 percent of initial measured value. ESR: See table I. Insulation resistance of insulating sleeve: Not less than 100 mego
26、hms. High temperature exposure: (500 hours at +125C) DCL: Not more than 200 percent of initial requirement. C: Within 10 percent of initial measured value. ESR: Not more than 115 percent of initial requirement. Reverse voltage: Not applicable. Penetration of solvents: In accordance with MIL-PRF-3901
27、8. High temperature verification: In accordance with MIL-PRF-39018 at +125C with derated voltage applied: Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39018/2F 6 DCL: See table I. C: Within 10 percent of initial measured value. ESR: Not mo
28、re than 130 percent of initial requirement. Marking: In accordance with MIL-PRF-39018. Part or Identifying Number (PIN): M39018/02- (Dash number from table I). Substitutability data: See table II. TABLE II. Substitutability dataDash number in MIL-PRF-39018/2D . Dash number MIL-PRF-39018/2 Style CU14
29、 Style CU15 Style CU14 Style CU15 -10 +30 -10 +50 -10 +75 -10 +30 -10 +50 -10 +75 -10 +30 -10 +50 -10 +75 -10 +30 -10 +50 -10 +75 0401 - 0501 0601 - 0701 0001 - 0002 0003 - 0004 0402 - 0502 0602 - 0702 0005 - 0006 0007 - 0008 0403 - 0503 0603 - 0703 0009 - 0010 0011 - 0012 0404 - 0504 0604 - 0704 00
30、13 - 0014 0015 - 0016 0405 - 0505 0605 - 0705 0017 - 0018 0019 - 0020 0406 - 0506 0606 - 0706 0021 - 0022 0023 - 0024 0407 - 0507 0607 - 0707 0025 - 0026 0027 - 0028 0408 - 0508 0608 - 0708 0029 - 0030 0031 - 0032 0409 - 0509 0609 - 0709 0033 - 0034 0035 - 0036 0410 - 0510 0610 - 0710 0037 - 0038 00
31、39 - 0040 0411 - 0511 0611 - 0711 0041 - 0042 0043 - 0044 0412 - 0512 0612 - 0712 0045 - 0046 0047 - 0048 0413 - 0513 0613 - 0713 0049 - 0050 0051 - 0052 0414 - 0514 0614 - 0714 0053 - 0054 0055 - 0056 0415 - 0515 0615 - 0715 0057 - 0058 0059 - 0060 0416 - 0516 0616 - 0716 0061 - 0062 0063 - 0064 04
32、17 - 0517 0617 - 0717 0065 - 0066 0067 - 0068 0418 - 0518 0618 - 0718 0069 - 0070 0071 - 0072 0419 - 0519 0619 - 0719 0073 - 0074 0075 - 0076 0420 - 0520 0620 - 0720 0077 - 0078 0079 - 0080 0421 - 0521 0621 - 0721 0081 - 0082 0083 - 0084 0422 - 0522 0622 - 0722 0085 - 0086 0087 - 0088 0423 - 0523 06
33、23 - 0723 0089 - 0090 0091 - 0092 0424 - 0524 0624 - 0724 0093 - 0094 0095 - 0096 0425 - 0525 0625 - 0725 0097 - 0098 0099 - 0100 0426 - 0526 0626 - 0726 0101 - 0102 0103 - 0104 0427 - 0527 0627 - 0727 0105 - 0106 0107 - 0108 0428 - 0528 0628 - 0728 0109 - 0110 0111 - 0112 0429 0529 - 0629 0729 - 01
34、13 0114 - 0115 0116 - 0430 0530 - 0630 0730 - 0117 0118 - 0119 0120 - 0431 0531 - 0631 0731 - 0121 0122 - 0123 0124 - 0432 0532 - 0632 0732 - 0125 0126 - 0127 0128 - 0433 0533 - 0633 0733 - 0129 0130 - 0131 0132 - 0434 0534 - 0634 0734 - 0133 0134 - 0135 0136 - 0435 0535 - 0635 0735 - 0137 0138 - 01
35、39 0140 - 0436 0536 - 0636 0736 - 0141 0142 - 0143 0144 - 0437 0537 - 0637 0737 - 0145 0146 - 0147 0148 - 0438 0538 - 0638 0738 - 0149 0150 - 0151 0152 - 0439 0539 - 0639 0739 - - - - - - - 0440 0540 - 0640 0740 - - - - - - - 0441 0541 - 0641 0741 - - - - - - - 0442 0542 - 0642 0742 - 0153 0154 - 01
36、55 0156 - 0443 0543 - 0643 0743 - 0157 0158 - 0159 0160 - 0444 0544 - 0644 0744 - 0161 0162 - 0163 0164 - 0445 0545 - 0645 0745 - 0165 0166 - 0167 0168 - 0446 0546 - 0646 0746 - 0169 0170 - 0171 0172 - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
37、MIL-PRF-39018/2F 7 NOTES: Reference document. MIL-PRF-39018. MIL-STD-202. Changes from previous issueNOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities change, you should verify the currency of the information
38、above using the ASSIST Online database at . The margins of this specification are marked with asterisks to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders
39、 and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Custodians: Preparing activity Army - CR DLA - CC Navy - EC Air Force 85 DLA - CC Review activities: Army MI (Project 5910-2009-021) Navy - AS, MC, OS, SH Air Force - 19 http:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
