DLA MIL-PRF-83421 1 D-2009 CAPACITORS FIXED METALLIZED PLASTIC FILM DIELECTRIC DC AND AC HERMETICALLY SEALED IN METAL CASES ESTABLISHED RELIABILITY STYLES CRH01 CRH02 CRH03 CRH04 C.pdf

上传人:Iclinic170 文档编号:693010 上传时间:2018-12-30 格式:PDF 页数:15 大小:124.62KB
下载 相关 举报
DLA MIL-PRF-83421 1 D-2009 CAPACITORS FIXED METALLIZED PLASTIC FILM DIELECTRIC DC AND AC HERMETICALLY SEALED IN METAL CASES ESTABLISHED RELIABILITY STYLES CRH01 CRH02 CRH03 CRH04 C.pdf_第1页
第1页 / 共15页
DLA MIL-PRF-83421 1 D-2009 CAPACITORS FIXED METALLIZED PLASTIC FILM DIELECTRIC DC AND AC HERMETICALLY SEALED IN METAL CASES ESTABLISHED RELIABILITY STYLES CRH01 CRH02 CRH03 CRH04 C.pdf_第2页
第2页 / 共15页
DLA MIL-PRF-83421 1 D-2009 CAPACITORS FIXED METALLIZED PLASTIC FILM DIELECTRIC DC AND AC HERMETICALLY SEALED IN METAL CASES ESTABLISHED RELIABILITY STYLES CRH01 CRH02 CRH03 CRH04 C.pdf_第3页
第3页 / 共15页
DLA MIL-PRF-83421 1 D-2009 CAPACITORS FIXED METALLIZED PLASTIC FILM DIELECTRIC DC AND AC HERMETICALLY SEALED IN METAL CASES ESTABLISHED RELIABILITY STYLES CRH01 CRH02 CRH03 CRH04 C.pdf_第4页
第4页 / 共15页
DLA MIL-PRF-83421 1 D-2009 CAPACITORS FIXED METALLIZED PLASTIC FILM DIELECTRIC DC AND AC HERMETICALLY SEALED IN METAL CASES ESTABLISHED RELIABILITY STYLES CRH01 CRH02 CRH03 CRH04 C.pdf_第5页
第5页 / 共15页
点击查看更多>>
资源描述

1、AMSC N/A FSC 5910 MIL-PRF-83421/1D 27 March 2009 SUPERSEDING MIL-PRF-83421/1C 24 January 2006 PERFORMANCE SPECIFICATION SHEET CAPACITORS, FIXED, METALLIZED PLASTIC FILM DIELECTRIC, DC AND AC, HERMETICALLY SEALED IN METAL CASES, ESTABLISHED RELIABILITY STYLES CRH01, CRH02, CRH03, CRH04, CRH05, CRH06,

2、 CRH07, CRH08, CRH09, AND CRH00 This specification sheet is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-PRF-83421. STYLES CRH06 THROUGH CRH00 INACTIVE FOR

3、DESIGN AFTER 4 JANUARY 1980. USE CRH01 THROUGH CRH05 NOTES: 1. Number 22 AWG wire (.025 inch .002 (0.64 mm 0.05) for case diameters of .312 (7.92 mm) and less. Number 20 AWG wire (.032 inch .002 (0.81 mm 0.05) for case diameters of .400 (10.16 mm) and .500 (12.70 mm). Number 18 AWG wire (.040 inch .

4、002 (1.02 mm 0.05) for case diameters of .562 (14.27 mm) and over. 2. Dimensions are in inches. 3. Metric equivalents in parenthesis are given for general information only. 4. See table I for additional dimensions. 5. Insulating sleeve shall extend beyond the capacitor body. Insulating sleeve thickn

5、ess shall not exceed .005 (0.13 mm) inch. 6. Plastic insulating sleeve shall be transparent; marking shall be applied to the capacitor case. 7. Lead length may be a minimum of one inch (25.4 mm) long for use in tape and reel packaging, when specified in the ordering data. FIGURE 1. Capacitor configu

6、ration. INCH-POUNDProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Electrical characteristics, dimensions, and dash numbers. CRH01 AND CHR06 - 30 volts (DC rating) Dimensions 1/ (in inches with mm in parentheses) Dash numbers 2/ AC ratings (f

7、or sinusoidal operation from -65 to +100C) 3/ 0 to .4 kHz At 4 kHz At 40 kHz Capacitance tolerance value (in %) Capacitance value (nom) (in f) L .030 (0.76) D +.020 (0.51) -.010 (0.25) G, max 0.25 0.5 1.0 2.0 5.0 10.0 Volts Current (in A) Volts Current (in A) Volts Current (in A) 0.001 0.500 (12.70)

8、 0.170 (4.32) 0.700 (17.78) -001- -002- -003- -004- -005- -006- 22.0 .001 22.0 .001 22.0 .006 0.0012 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -007- -008- -009- -010- -011- -012- 22.0 .001 22.0 .001 22.0 .007 0.0015 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -013- -014- -015- -016- -017- -018- 22.0 .00

9、1 22.0 .001 22.0 .008 0.0018 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -019- -020- -021- -022- -023- -024- 22.0 .001 22.0 .001 22.0 .010 0.002 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -025- -026- -027- -028- -029- -030- 22.0 .001 22.0 .001 22.0 .011 0.0022 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -03

10、1- -032- -033- -034- -035- -036- 22.0 .001 22.0 .001 22.0 .012 0.0027 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -037- -038- -039- -040- -041- -042- 22.0 .001 22.0 .002 22.0 .015 0.0033 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -043- -044- -045- -046- -047- -048- 22.0 .001 22.0 .002 22.0 .018 0.0039 0.

11、500 (12.70) 0.170 (4.32) 0.700 (17.78) -049- -050- -051- -052- -053- -054- 22.0 .001 22.0 .002 22.0 .021 0.0047 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -055- -056- -057- -058- -059- -060- 22.0 .001 22.0 .003 22.0 .026 0.005 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -061- -062- -063- -064- -065- -066

12、 22.0 .001 22.0 .003 22.0 .028 0.0056 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -067- -068- -069- -070- -071- -072- 22.0 .001 22.0 .003 22.0 .031 0.0068 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -073- -074- -075- -076- -077- -078- 22.0 .001 22.0 .004 22.0 .037 0.0082 0.500 (12.70) 0.170 (4.32) 0.700

13、17.78) -079- -080- -081- -082- -083- -084- 22.0 .001 22.0 .005 22.0 .045 0.01 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -085- -086- -087- -088- -089- -090- 22.0 .001 22.0 .006 22.0 .055 0.012 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -091- -092- -093- -094- -095- -096- 22.0 .001 22.0 .007 22.0 .066 0

14、015 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -097- -098- -099- -100- -101- -102- 22.0 .001 22.0 .008 22.0 .082 0.018 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -103- -104- -105- -106- -107- -108- 22.0 .001 22.0 .010 22.0 .10 0.02 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -109- -110- -111- -112- -113-

15、114- 22.0 .001 22.0 .011 22.0 .11 0.022 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -115- -116- -117- -118- -119- -120- 22.0 .001 22.0 .012 22.0 .12 0.027 0.562 (14.27) 0.170 (4.32) 0.762 (19.35) -121- -122- -123- -124- -125- -126- 22.0 .001 22.0 .015 22.0 .15 0.033 0.562 (14.27) 0.170 (4.32) 0.762 (1

16、9.35) -127- -128- -129- -130- -131- -132- 22.0 .002 22.0 .018 22.0 .18 0.039 0.562 (14.27) 0.170 (4.32) 0.762 (19.35) -133- -134- -135- -136- -137- -138- 22.0 .002 22.0 .021 22.0 .22 0.047 0.562 (14.27) 0.170 (4.32) 0.762 (19.35) -139- -140- -141- -142- -143- -144- 22.0 .003 22.0 .026 22.0 .26 0.05

17、0.562 (14.27) 0.170 (4.32) 0.762 (19.35) -145- -146- -147- -148- -149- -150- 22.0 .003 22.0 .028 22.0 .28 0.056 0.562 (14.27) 0.170 (4.32) 0.762 (19.35) -151- -152- -153- -154- -155- -156- 22.0 .003 22.0 .031 22.0 .31 0.068 0.687 (17.45) 0.170 (4.32) 0.887 (22.53) -157- -158- -159- -160- -161- -162-

18、 22.0 .004 22.0 .037 22.0 .37 0.082 0.687 (17.45) 0.170 (4.32) 0.887 (22.53) -163- -164- -165- -166- -167- -168- 22.0 .005 22.0 .045 22.0 .45 0.1 0.687 (17.45) 0.193 (4.90) 0.887 (22.53) -169- -170- -171- -172- -173- -174- 22.0 .006 22.0 .055 22.0 .55 0.12 0.687 (17.45) 0.193 (4.90) 0.887 (22.53) -1

19、75- -176- -177- -178- -179- -180- 22.0 .007 22.0 .066 22.0 .66 0.15 0.562 (14.27) 0.235 (5.97) 0.762 (19.35) -181- -182- -183- -184- -185- -186- 22.0 .008 22.0 .082 22.0 .83 0.18 0.687 (17.45) 0.235 (5.97) 0.887 (22.53) -373- -374- -375- -376- -377- -378- 22.0 .010 22.0 .100 22.0 1.00 0.20 0.687 (17

20、45) 0.235 (5.97) 0.887 (22.53) -187- -188- -189- -190- -191- -192- 22.0 .011 22.0 .110 20.0 1.00 0.22 0.687 (17.45) 0.235 (5.97) 0.887 (22.53) -193- -194- -195- -196- -197- -198- 22.0 .012 22.0 .120 18.5 1.02 0.27 0.687 (17.45) 0.235 (5.97) 0.887 (22.53) -199- -200- -201- -202- -203- -204- 22.0 .01

21、5 22.0 .150 17.0 1.15 0.33 0.687 (17.45) 0.235 (5.97) 0.887 (22.53) -205- -206- -207- -208- -209- -210- 22.0 .018 22.0 .180 16.0 1.32 0.39 0.687 (17.45) 0.235 (5.97) 0.887 (22.53) -211- -212- -213- -214- -215- -216- 22.0 .021 22.0 .21 15.0 1.46 See footnotes at end of table. MIL-PRF-83421/1D2 Provid

22、ed by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Electrical characteristics, dimensions, and dash numbers - Continued. CRH01 AND CHR06 - 30 volts (DC rating) Dimensions 1/ (in inches with mm in parentheses) Dash numbers 2/ AC ratings (for sinusoida

23、l operation from -65 to +100C) 3/ 0 to .4 kHz At 4 kHz At 40 kHz Capacitance tolerance value (in %) Capacitance value (nom) (in f) L .030 (0.76) D +.020 (0.51) -.010 (0.25) G, max 0.25 0.5 1.0 2.0 5.0 10.0 Volts Current (in A) Volts Current (in A) Volts Current (in A) 0.47 0.687 (17.45) 0.312 (7.92)

24、 0.887 (22.53) -217- -218- -219- -220- -221- -222- 22.0 .026 22.0 .26 14.0 1.65 0.50 0.687 (17.45) 0.312 (7.92) 0.887 (22.53) -223- -224- -225- -226- -227- -228- 22.0 .028 22.0 .28 13.5 1.69 0.56 0.687 (17.45) 0.312 (7.92) 0.887 (22.53) -229- -230- -231- -232- -233- -234- 22.0 .031 22.0 .31 12.9 1.8

25、1 0.68 0.687 (17.45) 0.312 (7.92) 0.887 (22.53) -235- -236- -237- -238- -239- -240- 22.0 .037 22.0 .37 12.0 2.04 0.82 0.813 (20.65) 0.312 (7.92) 1.013 (25.73) -241- -242- -243- -244- -245- -246- 22.0 .045 22.0 .45 10.0 2.05 1.0 0.813 (20.65) 0.312 (7.92) 1.013 (25.73) -247- -248- -249- -250- -251- -

26、252- 22.0 .055 22.0 .55 8.4 2.10 1.2 0.813 (20.65) 0.312 (7.92) 1.013 (25.73) -253- -254- -255- -256- -257- -258- 22.0 .066 22.0 .66 7.2 2.15 1.5 0.813 (20.65) 0.400 (10.16) 1.013 (25.73) -259- -260- -261- -262- -263- -264- 22.0 .082 22.0 .83 5.8 2.17 1.8 0.813 (20.65) 0.400 (10.16) 1.013 (25.73) -2

27、65- -266- -267- -268- -269- -270- 22.0 .099 22.0 .99 4.8 2.20 2.0 0.813 (20.65) 0.400 (10.16) 1.013 (25.73) -271- -272- -273- -274- -275- -276- 22.0 .110 22.0 1.10 4.4 2.20 2.2 0.813 (20.65) 0.400 (10.16) 1.013 (25.73) -277- -278- -279- -280- -281- -282- 22.0 .12 22.0 1.21 4.0 2.20 2.7 1.063 (27.00)

28、 0.400 (10.16) 1.263 (32.08) -385- -386- -387- -388- -389- -390- 22.0 .15 22.0 1.49 3.3 2.20 3.0 1.063 (27.00) 0.400 (10.16) 1.263 (32.08) -289- -290- -291- -292- -293- -294- 22.0 .17 22.0 1.65 2.9 2.20 3.3 1.063 (27.00) 0.400 (10.16) 1.263 (32.08) -295- -296- -297- -298- -299- -300- 22.0 .18 22.0 1

29、82 2.7 2.20 3.9 1.375 (34.93) 0.400 (10.16) 1.575 (40.01) -301- -302- -303- -304- -305- -306- 22.0 .21 22.0 2.14 2.3 2.20 4.7 1.375 (34.93) 0.500 (12.70) 1.575 (40.01) -313- -314- -315- -316- -317- -318- 22.0 .26 18.7 2.20 1.9 2.20 5.0 1.375 (34.93) 0.500 (12.70) 1.575 (40.01) -319- -320- -321- -32

30、2- -323- -324- 22.0 .28 17.6 2.20 1.8 2.20 5.6 1.375 (34.93) 0.500 (12.70) 1.575 (40.01) -325- -326- -327- -328- -329- -330- 22.0 .31 15.7 2.20 1.6 2.20 6.8 1.375 (34.93) 0.562 (14.27) 1.575 (40.01) -331- -332- -333- -334- -335- -336- 22.0 .37 13.0 2.20 1.3 2.20 8.0 1.375 (34.93) 0.562 (14.27) 1.575

31、 (40.01) -337- -338- -339- -340- -341- -342- 22.0 .44 11.0 2.20 1.1 2.20 8.2 1.375 (34.93) 0.562 (14.27) 1.575 (40.01) -343- -344- -345- -346- -347- -348- 22.0 .45 10.7 2.20 1.1 2.20 10.0 1.375 (34.93) 0.562 (14.27) 1.575 (40.01) -349- -350- -351- -352- -353- -354- 22.0 .55 8.8 2.20 .88 2.20 12.0 1.

32、875 (47.63) 0.562 (14.27) 2.075 (52.71) -379- -380- -381- -382- -383- -384- 22.0 .66 7.3 2.20 .73 2.20 15.0 1.875 (47.63) 0.562 (14.27) 2.075 (52.71) -355- -356- -357- -358- -359- -360- 22.0 .83 5.9 2.20 .59 2.20 20.0 1.875 (47.63) 0.670 (17.02) 2.075 (52.71) -361- -362- -363- -364- -365- -366- 22.0

33、 1.10 4.4 2.20 .44 2.20 22.0 1.875 (47.63) 0.670 (17.02) 2.075 (52.71) -367- -368- -369- -370- -371- -372- 22.0 1.21 4.0 2.20 .40 2.20 CRH02 AND CHR07 - 50 volts (DC rating) 0.001 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -001- -002- -003- -004- -005- -006- 36.0 .001 36.0 .001 36.0 .009 0.0012 0.500

34、12.70) 0.170 (4.32) 0.700 (17.78) -007- -008- -009- -010- -011- -012- 36.0 .001 36.0 .001 36.0 .011 0.0015 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -013- -014- -015- -016- -017- -018- 36.0 .001 36.0 .001 36.0 .013 0.0018 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -019- -020- -021- -022- -023- -024- 3

35、6.0 .001 36.0 .002 36.0 .016 0.002 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -025- -026- -027- -028- -029- -030- 36.0 .001 36.0 .002 36.0 .018 0.0022 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -031- -032- -033- -034- -035- -036- 36.0 .001 36.0 .002 36.0 .020 0.0027 0.500 (12.70) 0.170 (4.32) 0.700 (17.

36、78) -037- -038- -039- -040- -041- -042- 36.0 .001 36.0 .002 36.0 .024 0.0033 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -043- -044- -045- -046- -047- -048- 36.0 .001 36.0 .003 36.0 .030 0.0039 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -049- -050- -051- -052- -053- -054- 36.0 .001 36.0 .004 36.0 .035 Se

37、e footnotes at end of table. MIL-PRF-83421/1D3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Electrical characteristics, dimensions, and dash numbers - Continued. CRH02 AND CHR07 - 50 volts (DC rating) Dimensions 1/ (in inches with mm in p

38、arentheses) Dash numbers 2/ AC ratings (for sinusoidal operation from -65 to +100C) 3/ 0 to .4 kHz At 4 kHz At 40 kHz Capacitance tolerance value (in %) Capacitance value (nom) (in f) L .030 (0.76) D +.020 (0.51) -.010 (0.25) G, max 0.25 0.5 1.0 2.0 5.0 10.0 Volts Current (in A) Volts Current (in A)

39、 Volts Current (in A) 0.0047 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -055- -056- -057- -058- -059- -060- 36.0 .001 36.0 .004 36.0 .042 0.005 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -061- -062- -063- -064- -065- -066- 36.0 .001 36.0 .005 36.0 .045 0.0056 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -06

40、7- -068- -069- -070- -071- -072- 36.0 .001 36.0 .005 36.0 .050 0.0068 0.500 (12.70) 0.170 (4.32) 0.700 (17.78) -073- -074- -075- -076- -077- -078- 36.0 .001 36.0 .006 36.0 .061 0.0082 0.562 (14.27) 0.170 (4.32) 0.762 (19.35) -079- -080- -081- -082- -083- -084- 36.0 .001 36.0 .007 36.0 .074 0.01 0.56

41、2 (14.27) 0.170 (4.32) 0.762 (19.35) -085- -086- -087- -088- -089- -090- 36.0 .001 36.0 .009 36.0 .090 0.012 0.562 (14.27) 0.170 (4.32) 0.762 (19.35) -091- -092- -093- -094- -095- -096- 36.0 .001 36.0 .011 36.0 .11 0.015 0.562 (14.27) 0.170 (4.32) 0.762 (19.35) -097- -098- -099- -100- -101- -102- 36

42、0 .001 36.0 .013 36.0 .14 0.018 0.562 (14.27) 0.193 (4.90) 0.762 (19.35) -103- -104- -105- -106- -107- -108- 36.0 .002 36.0 .016 36.0 .16 0.02 0.562 (14.27) 0.193 (4.90) 0.762 (19.35) -109- -110- -111- -112- -113- -114- 36.0 .002 36.0 .018 36.0 .18 0.022 0.562 (14.27) 0.193 (4.90) 0.762 (19.35) -11

43、5- -116- -117- -118- -119- -120- 36.0 .002 36.0 .020 36.0 .20 0.027 0.562 (14.27) 0.193 (4.90) 0.762 (19.35) -121- -122- -123- -124- -125- -126- 36.0 .002 36.0 .024 36.0 .24 0.033 0.562 (14.27) 0.193 (4.90) 0.762 (19.35) -127- -128- -129- -130- -131- -132- 36.0 .003 36.0 .030 36.0 .30 0.039 0.687 (1

44、7.45) 0.170 (4.32) 0.887 (22.53) -133- -134- -135- -136- -137- -138- 36.0 .004 36.0 .035 36.0 .35 0.047 0.687 (17.45) 0.170 (4.32) 0.887 (22.53) -139- -140- -141- -142- -143- -144- 36.0 .004 36.0 .042 36.0 .42 0.05 0.687 (17.45) 0.170 (4.32) 0.887 (22.53) -145- -146- -147- -148- -149- -150- 36.0 .00

45、5 36.0 .045 36.0 .45 0.056 0.687 (17.45) 0.193 (4.90) 0.887 (22.53) -151- -152- -153- -154- -155- -156- 36.0 .005 36.0 .050 36.0 .50 0.068 0.687 (17.45) 0.193 (4.90) 0.887 (22.53) -157- -158- -159- -160- -161- -162- 36.0 .006 36.0 .061 34.0 .58 0.082 0.813 (20.65) 0.193 (4.90) 1.013 (25.73) -163- -1

46、64- -165- -166- -167- -168- 36.0 .007 36.0 .074 32.0 .66 0.1 0.813 (20.65) 0.193 (4.90) 1.013 (25.73) -169- -170- -171- -172- -173- -174- 36.0 .009 36.0 .090 30.0 .75 0.12 0.687 (17.45) 0.235 (5.97) 0.887 (22.53) -175- -176- -177- -178- -179- -180- 36.0 .011 36.0 .11 30.0 .90 0.15 0.687 (17.45) 0.23

47、5 (5.97) 0.887 (22.53) -181- -182- -183- -184- -185- -186- 36.0 .013 36.0 .14 26.0 .98 0.18 0.813 (20.65) 0.235 (5.97) 1.013 (25.73) -187- -188- -189- -190- -191- -192- 36.0 .016 36.0 .16 25.0 1.13 0.20 0.813 (20.65) 0.235 (5.97) 1.013 (25.73) -193- -194- -195- -196- -197- -198- 36.0 .018 36.0 .18 2

48、4.0 1.20 0.22 0.813 (20.65) 0.235 (5.97) 1.013 (25.73) -199- -200- -201- -202- -203- -204- 36.0 .020 36.0 .20 23.0 1.27 0.27 0.687 (17.45) 0.312 (7.92) 0.887 (22.53) -205- -206- -207- -208- -209- -210- 36.0 .024 36.0 .24 19.0 1.28 0.33 0.687 (17.45) 0.312 (7.92) 0.887 (22.53) -211- -212- -213- -214- -215- -216- 36.0 .030 36.0 .30 18.0 1.48 0.39 0.813 (20.65) 0.312 (7.92) 1.013 (25.73) -217- -218- -219- -220- -221- -222- 36.0 .035 36.0 .35 17.0 1.66 0.47 0.813 (20.65) 0.312

展开阅读全文
相关资源
猜你喜欢
  • BS 3087-12-1991 Pliers and nippers - Specification for dimensions and test values of construction workers pincers《夹扭钳和剪断钳 第12部分 工人用夹钳尺寸和结构试验值规范》.pdf BS 3087-12-1991 Pliers and nippers - Specification for dimensions and test values of construction workers pincers《夹扭钳和剪断钳 第12部分 工人用夹钳尺寸和结构试验值规范》.pdf
  • BS 3087-13-1991 Pliers and nippers - Specification for dimensions and test values of carpenters pincers《夹扭钳和剪断钳 第13部分 木工用夹钳尺寸和试验值规范》.pdf BS 3087-13-1991 Pliers and nippers - Specification for dimensions and test values of carpenters pincers《夹扭钳和剪断钳 第13部分 木工用夹钳尺寸和试验值规范》.pdf
  • BS 3087-7-1996 Pliers and nippers Specification for dimensions of lever assisted side cutting pliers end and diagonal cutting nippers《夹钳和剪断钳 第7部分 杠杆式侧剪钳、中心剪丝钳和斜嘴钳尺寸规范》.pdf BS 3087-7-1996 Pliers and nippers Specification for dimensions of lever assisted side cutting pliers end and diagonal cutting nippers《夹钳和剪断钳 第7部分 杠杆式侧剪钳、中心剪丝钳和斜嘴钳尺寸规范》.pdf
  • BS 3088-1959 Specification for adjustable hand reamers with inserted blades《嵌入式刀头可调手用铰刀规范》.pdf BS 3088-1959 Specification for adjustable hand reamers with inserted blades《嵌入式刀头可调手用铰刀规范》.pdf
  • BS 3090-1978 Method of test for the determination of the cuprammonium fluidity of linen materials《测定亚麻布料的铜氨流动度的试验方法》.pdf BS 3090-1978 Method of test for the determination of the cuprammonium fluidity of linen materials《测定亚麻布料的铜氨流动度的试验方法》.pdf
  • BS 3092-1973 Specification for main friction clutches main power-take-off assemblies and associated attachments for internal combustion engines《内燃机主摩擦离合器、主动力输出装置及其有关附件的规范》.pdf BS 3092-1973 Specification for main friction clutches main power-take-off assemblies and associated attachments for internal combustion engines《内燃机主摩擦离合器、主动力输出装置及其有关附件的规范》.pdf
  • BS 3095-1 2-1988 Methods for determination of the freezing-point depression of milk - Methods - Hortvet method《牛奶冻结点下降值的测定方法 霍尔特维特法》.pdf BS 3095-1 2-1988 Methods for determination of the freezing-point depression of milk - Methods - Hortvet method《牛奶冻结点下降值的测定方法 霍尔特维特法》.pdf
  • BS 3095-2-1988 Methods for determination of the freezing-point depression of milk - Recommendations for the interpretation of the freezing-point depression of herd milk《牛奶冻结点下降值测定方.pdf BS 3095-2-1988 Methods for determination of the freezing-point depression of milk - Recommendations for the interpretation of the freezing-point depression of herd milk《牛奶冻结点下降值测定方.pdf
  • BS 3095-3-1981 Methods for determination of the freezing-point depression of milk - Storage of samples《牛奶冻结点下降值测定方法 第3部分 样品贮存》.pdf BS 3095-3-1981 Methods for determination of the freezing-point depression of milk - Storage of samples《牛奶冻结点下降值测定方法 第3部分 样品贮存》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1