DLA MIL-S-22885 1 J-2010 SWITCH PUSH BUTTON ILLUMINATED LENSES (SCREW-IN T-1-3 4 MFB LAMP).pdf

上传人:diecharacter305 文档编号:693405 上传时间:2018-12-30 格式:PDF 页数:5 大小:106.58KB
下载 相关 举报
DLA MIL-S-22885 1 J-2010 SWITCH PUSH BUTTON ILLUMINATED LENSES (SCREW-IN T-1-3 4 MFB LAMP).pdf_第1页
第1页 / 共5页
DLA MIL-S-22885 1 J-2010 SWITCH PUSH BUTTON ILLUMINATED LENSES (SCREW-IN T-1-3 4 MFB LAMP).pdf_第2页
第2页 / 共5页
DLA MIL-S-22885 1 J-2010 SWITCH PUSH BUTTON ILLUMINATED LENSES (SCREW-IN T-1-3 4 MFB LAMP).pdf_第3页
第3页 / 共5页
DLA MIL-S-22885 1 J-2010 SWITCH PUSH BUTTON ILLUMINATED LENSES (SCREW-IN T-1-3 4 MFB LAMP).pdf_第4页
第4页 / 共5页
DLA MIL-S-22885 1 J-2010 SWITCH PUSH BUTTON ILLUMINATED LENSES (SCREW-IN T-1-3 4 MFB LAMP).pdf_第5页
第5页 / 共5页
亲,该文档总共5页,全部预览完了,如果喜欢就下载吧!
资源描述

1、AMSC N/A FSC 5930 INCH-POUND MIL-S-22885/1J 11 May 2010 SUPERSEDING MIL-S-22885/1H 16 May 2003 MILITARY SPECIFICATION SHEET SWITCH, PUSH BUTTON, ILLUMINATED LENSES (SCREW-IN, T-1-3/4 MFB LAMP) Inactive for new design after 21 July 1997, except for replacement purposes. This specification is approved

2、 for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the switches described herein shall consist of this specification sheet and MIL-PRF-22885. FIGURE 1. Lenses. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from

3、 IHS-,-,-MIL-S-22885/1J 2 FIGURE 1. Lenses - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-22885/1J 3 NOTES: 1. Dimensions are in inches. 2. Unless otherwise specified, tolerances are .005 (.13 mm) for three place decimals and .02

4、51 mm) or two place decimals. 3. Internal design of lens is optional. 4. Internal design of lamp retainer is optional. 5. Metric equivalents (to the nearest .01 mm) are given for general information only. FIGURE 1. Lenses - Continued. Inches mm .03 .76 .032 .81 .12 3.05 .20 5.08 .266 6.76 .312 7.9

5、2 .437 11.10 .50 12.70 .62 15.75 .67 17.02 .75 19.05 .81 20.57 .88 22.35 2.00 50.80 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-22885/1J 4 REQUIREMENTS: Dimensions and configuration: See figure 1 and table I. Material: See table I. Thermal

6、shock: 71C maximum temperature (nonoperating). Color coordinates: See table II. Part number: M22885/1- (dash number from table I). TABLE I. Part number and lens characteristics. Part number 1/ M22885/1 Configuration Color Brightness 2/ Material Supersession data (3/4 face) M22885/ 01 A Yellow 225 ft

7、 L ASTM-D707 - 02 A White 250 ft L ASTM-D707 - 03 A Red 20 ft L ASTM-D707 - 04 A Green 11 ft L ASTM-D707 - 05 A Blue 7 ft L L-P-380 - 06 B Yellow 150 ft L ASTM-D707 3-01 07 B White 200 ft L ASTM-D707 3-02 08 B Red 15 ft L ASTM-D707 3-03 09 B Green 18 ft L ASTM-D707 3-04 10 B Blue 4 ft L L-P-380 3-05

8、 11 C Yellow 300 ft L ASTM-D707 4-01 12 C White 300 ft L ASTM-D707 4-02 13 C Red 25 ft L ASTM-D707 4-03 14 C Green 40 ft L ASTM-D707 4-04 15 C Blue 10 ft L L-P-380 4-05 16 D Yellow 150 ft L ASTM-D707 5-01 17 D White 200 ft L ASTM-D707 5-02 18 D Red 15 ft L ASTM-D707 5-03 19 D Green 18 ft L ASTM-D707

9、 5-04 20 D Blue 4 ft L L-P-380 5-05 21 E Yellow 120 ft L ASTM-D707 6-01 22 E White 135 ft L ASTM-D707 6-02 23 E Red 14 ft L ASTM-D707 6-03 24 E Green 14 ft L ASTM-D707 6-04 25 E Blue 2 ft L L-P-380 6-05 1/ Part numbers listed are for lenses without legends. 2/ Brightness values are approximate at 2,

10、100 50 Kelvin, utilizing a T-1-3/4 lamp having a mean spherical candlepower of .34 .02. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-22885/1J 5 TABLE II. Color coordinates. Color coordinates .02 “x” “y” Yellow .579 .417 White .526 .413 Red .

11、701 .292 Green .183 .589 Blue .127 .268 Intended use: Lens shall accommodate one midget-flange-base T-1-3/4 incandescent lamp and shall be capable of mating with switch housings in accordance with MIL-S-22885/8. The margins of this specification are marked with vertical lines to indicate where modif

12、ications from this revision were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the m

13、arginal notations. Reference documents: MIL-PRF-22885 MIL-S-22885/8 MIL-DTL-6363/8 ASTM-D707 L-P-380 SAE-AS28775 Custodians: Preparing activity: Army - CR DLA - CC Navy - EC Air Force - 85 (Project 5930-2008-051) DLA - CC Review activities: Army - AR, AT, AV, CR4 Navy - AS, MC, OS, SH Air Force 19,

14、99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil/ . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • DIN 58959-8-1997 Quality management in medical microbiology - Part 8 Requirements for the use of control strains for testing swabs transport media media of dip-slides and blood cul.pdf DIN 58959-8-1997 Quality management in medical microbiology - Part 8 Requirements for the use of control strains for testing swabs transport media media of dip-slides and blood cul.pdf
  • DIN 58959-9-1997 Quality management in medical microbiology - Part 9 Requirements for the use of control strains for testing culture media《医疗微生物学质量管理 第9部分 培养基检验对照菌株要求》.pdf DIN 58959-9-1997 Quality management in medical microbiology - Part 9 Requirements for the use of control strains for testing culture media《医疗微生物学质量管理 第9部分 培养基检验对照菌株要求》.pdf
  • DIN 58960-1-1988 Photometers for analytical tests used physical-chemical basic processes《分析试验用的光度计 第1部分 应用物理化学的基础过程》.pdf DIN 58960-1-1988 Photometers for analytical tests used physical-chemical basic processes《分析试验用的光度计 第1部分 应用物理化学的基础过程》.pdf
  • DIN 58960-2-1997 Photometer for analytical tests - Part 2 Technical design classification components concepts《分析试验光度计 第2部分 技术设计、分类 元件、术语》.pdf DIN 58960-2-1997 Photometer for analytical tests - Part 2 Technical design classification components concepts《分析试验光度计 第2部分 技术设计、分类 元件、术语》.pdf
  • DIN 58960-3-1988 Photometers for analytical tests concepts for characterisation of technical properties for absorption photometers《分析试验用的光度计 第3部分 吸收光度计技术性能特性的概念》.pdf DIN 58960-3-1988 Photometers for analytical tests concepts for characterisation of technical properties for absorption photometers《分析试验用的光度计 第3部分 吸收光度计技术性能特性的概念》.pdf
  • DIN 58960-4-1991 Photometer for analytical tests requirements for the description of technical data for the user《分析试验用光度计 第4部分 用户用技术数据说明书》.pdf DIN 58960-4-1991 Photometer for analytical tests requirements for the description of technical data for the user《分析试验用光度计 第4部分 用户用技术数据说明书》.pdf
  • DIN 58962-1-1994 Medical microbiology - Diagnosis of infections of the lower respiratory tract (LRT) - Part 1 Terminology general requirements《医疗微生物学 下呼吸道感染诊断 第1部分 术语、一般要求》.pdf DIN 58962-1-1994 Medical microbiology - Diagnosis of infections of the lower respiratory tract (LRT) - Part 1 Terminology general requirements《医疗微生物学 下呼吸道感染诊断 第1部分 术语、一般要求》.pdf
  • DIN 58962-2-1994 Medical microbiology - Diagnosis of infections of the lower respiratory tract (LRT) - Part 2 Microscopic examination《医疗微生物学 下呼吸道感染诊断 第2部分 显微诊察》.pdf DIN 58962-2-1994 Medical microbiology - Diagnosis of infections of the lower respiratory tract (LRT) - Part 2 Microscopic examination《医疗微生物学 下呼吸道感染诊断 第2部分 显微诊察》.pdf
  • DIN 58962-3-1996 Medical microbiology - Diagnosis of infections of the lower respiratory tract - Part 3 Cultural examination for the detection of bacteria and fungi《医疗微生物学 下呼吸道感染诊断.pdf DIN 58962-3-1996 Medical microbiology - Diagnosis of infections of the lower respiratory tract - Part 3 Cultural examination for the detection of bacteria and fungi《医疗微生物学 下呼吸道感染诊断.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1