1、M I L - S - 3 7 9 5 2 ( O L A- DM 3 June 1983 -XeTc i a I cs-na-snny pertinent data which may be of use in improving this document shou7d be addressed to: I Materiel, DPSC-ATT, 2900 South 29th Street, Philadeldlia, PA 1.91q1, by I using the sel f-addressed Standardization Document Improvenient Propo
2、sal Defense Personnel Support Center, Di rectora te of Medical (D Form 1425) appearing at the end of this document or - by letter. - SPINEROARD t This specification is approved for use by the 9efense Logistics Agency, Department of Defense, and is available for use? by al1 Departments and Agencies o
3、f the Department of Defense. 1. SCOPE 1.1 SCO e. This specification covors two types of spineboards for us? in the immobil rf zat on of patien%s with injuries or possible fractures of the cervical, thoracic, or lumbar spine. 1.3 Classification. Spineboards shall be of the following types, as Specifi
4、ed below: I Spineboard, Long I I Spi neboard, Short h- 2. APPLICABLE DOCUMENTS 2.1 Government documents. 2.1.1 Specification and standards. Unless otherwise Specified (see 5.21, the following specifications and standards of the issue listed in that issue of the Department of Defense Index of Specifi
5、cations and Standards !DI)DISSI specified in the solicitatioQ, form a part of %his specification to the extent. specified bel ow: SPECIFICATIONS FEDERAL TT-V-1?1 TT-F-?fj - Filler, Wood, Paste. PPP-B-636 - 9oxes, ?hipping, Fiberboard. - Varnish, Spar, Water Resisting. Page 1 of 7 - _ FSC 557r) Provi
6、ded by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-M T L 1 TARY ?tIL-P-IlS - Preservation-Packaging, Yethods W. YIL-L-1914fl - Lumber and Plywood, Fire Retardent Treated. MIL-A-22397 - Adhesive, %enol 9nd liesorci no? Resin Base. STANDARDS I FEDERAL FED-STO-
7、123 - Marking for !lomestic Shipment. MIL ITARY MIL-STD-lM MIL-STD-129 MIL-STD-lW - Identification Marking of IJ. S. Military Property. MIL-STD-171 - Finishing of Metal snd Wood Surfaces. - Sampl ing Pmcedures and Tab? as for Inspection by - Yarking for Shipment and $torage. Attributes. DRAW I NGS D
8、PSC Drawing b. 25503 Long Spineboard DPSC Drawing Nrt. 25W2 Short Spineboard Copi es of speci f icati ons and standards roqui red by nianufacturers i n connection with specific acquisition Functions should be obtained from the contracting activity or as directed by the contracting officer.) 2.2 Mher
9、 publications. The following documents form a part of this Specification to tk extent specified hewin. The issues of the rlocumerits which t!r indicated as Do0 adopted shall ho the issue listed in the current 9oDIIS and the suppl ement thereto, i f appl icabl P. DEPARTMENT OF CfMiERCE Product Standa
10、rd: PS-1-Construction and Industrial “lywood. (Application for copies should be addressed to the Superintendent of Documents, U. S. Government Drinting Office, Washirigton, OC 30402.) 3.3 Order of precedence. in the event of a conflict between the text of this speci fi cati on and the references cit
11、ed here4 n , the text of thi s sprci fi cati on chal 1 take precedence. 3. REQUIREMENTS 3.1 First Article. Yheq specified, a sanple s)iall be subjected t9 first article inspection (See sections 4 and 6). 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-
12、,-,-MIL-S-37752 65 7777906 0268833 LI 3.2 Fire and casualtv hazards. 3.a The contractor shall submit proof, prior to del ivery , that the i tems to be delivered under this specification confom to tho applicable requirements of MIL-L-19140 (see 4.1.31. 3.3 Materials. Except as herein specified, mater
13、ials for both types of Wlien materi a1 s to be used are not speci fi cal 1 y desi qnated, those spineboards shall conform to the applicable portions of the specifications, standards, and drawings listed in section 2, and sriall meet the requirements shown there: n . used shall be enti re1 y sui tab1
14、 a for the purpose i ntendod. 1.3.1 Plywoorf. The plywood shall conform to U. S. Comnerce Dept. Product Standard =Type I, Grade 3 and be fire retardant treated in accordance with MIL-L-19149. The wood shall have at least five plies and shall be finished smooth on all surfaces. 1.3.2 Runners (Type I
15、Spineboard Only). The runners shall be of red or white oak and have the dimensions indicated in the applicable drawing. 1.7.3 Screws (Type I Spineboard Only). The screws used in attaching the runners to the spineboard shall be comercial grade 410 oval head, brass, 1-3/4 inches long, and shall confor
16、m to the applicable drawing. 3.3.4 Adhesive Type i Spineboard Only). The adhesive used in attaching the runners to the spinehoard shall be high in both wet and dry strength and conform to MIL-A-2?397. 3.4 Desisn and construction. 3.4.1 Long Spineboard. The long spineboard, Type I, consists of a plyw
17、ood sheet with handholes and with runners, for ground clearance, fastened to the bottom. The board shall be constructed in accordance with the applicable drawing (see 2.1). 3.4.2 Short Spineboard. The short spineboard, Type II, consists of a plywood Sheet, #i t4 handhol es, and shall be constructed
18、in accordance with the appl ic- ab1 9 drawing (see 2.1). 3.5 Finish and Color. The color of the spineboards shall be that of the natural wood from which they are mide. The boards shall be medium sanded, sealed with paste wood fil 1 er which meets TT-F-315, and coated with wator resisting spar varnis
19、3 which meets TT-V-l?i. This finish conforms to finish 29.3 Of MIL-STD-171. 3.5.1 Alternate Finish. Prior to the application of the finish on Vie spineboards, a contractor mqy submit an al t.ernate method or process for finishing. processos are equivalent to thst specified in ?.Ge shall obtain appro
20、val for the use of such alternate process from the contracting officer prior to its application to the spineboards (see 5.2). The contractor must siibmit proor (see 4.2.3) that suc+ methods or ?n al1 cases %ho contractor 3.6 Workmanship. The spineboards shall be free from defects which detract from
21、their appearance or may irnpai r their servi ceabi 1 i ty . shall be smooth and free of spl inters. The fi ni shed boards 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-37752 65 m 779970b 02bLL b m 4. QUALITY ASSUI“CE PROVISIONS 4,l Respo-ns
22、ibility for tnSpw35-cm. Vnless .crthernise in the contract or purchase orrter,-pmsfbqe for -lhe perfsrmance of all inspection roqui ?“tc as -spectf ied 4rwein. Except 2s -rscJwfms) and testing -Metemination by technical means of pbysical aaid arni-nat.hn -B+ -4.9. 4.1.3.1.3 Qual ity -caireamriance h
23、spw.t%on. -Qual- ty conTormance i nspeeti on shall constst of th 2xamimati on -of 4.3. 4.1.3 Certi ficales oT qm-.i-ty Wrti f %midmi .-OP qual +%y, trpp? i ed by the manufacturer of the mtrePiats-may be Turntstied fn 1)eu of actual performance of such testing by the cantractor, -provided 90% -&dd3ty
24、 +as Ibeen maintained and can be demonstrrted to the Gtwmmxt. The wwtiffcate shall +nc1 ude the name of the contractor, the xorrtpact -number, -the sitame nf thio *manufacturer or supplier, tee NSN, 5he I- I&rrtif%zat-bn, %he .neme of-%he -mwponent/materi al , the lot number, the tot size,-theTle s5
25、ze, *thelditte UT $xst-i-ng, the test method, individual lest .matts, and-ihe specificat+on requi rments. 4.3 -Inspestion l ut. 4.2.1 Raw-gtixri-als. An Inspection Tat Tor iPawtin&erial inspection sball be all mateda1 praduced under -tk -stme .condi tioris and control led to the degree that uniformi
26、ty of product within -tb designated iot can be assured. identificatfon of the raw material by the manufacturer is-one method of control, as cited above, which is considered acceptable. Lot 4 60 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-F MIL-S-
27、37752 b5 W 999770b 0268835 8 4.2.2 End product. An inspection lot for inspection of end product shall consist of all spineboards of the sane type produced under essenti3lly the same conditions and offered for inspection at one time. 4.3 Samlina. 4.3.1 Sampling for exanination. Sampling for exaninati
28、on sqall be conducted in accordance with MIL - STD 103 , and table T. tion purposes shall be orie spineboard. Tke unit of product for examina- TABLE I. Samol i na for exami nati on. For vi sua1 examinati on Major defects Total defects (Ma.1 or and Mi nor combined) For dimpnsi onal exami nati on I S-
29、4 S-4 s-4 2.5 I i I 5.5 ?.5 i 4.4 Examination. The spineboaris shall be examinei to detemine compliance with all requirements contaiwd in this specification, including exanination of the spineboards to insure that they are flame retardent. 4.4.1 Classification of defects. Examination siall be conduc
30、ted in accordance with the cl3ssification of defects listed in table II. Exaqination shall not be restricted to the cl assi fied possible defects 1 i steci bel ow: (ri. TARLE II. Classification of defects. -_-_I- -_-_II-uI_-_IL_-I_ -_-_-Id Defects Not fini shed as cpeci fi ed sanded, seal xi, varni
31、shed) . Runners not properly attaclied (Type I only). Not free of slivers and sharp edges. Not smooth. - - - - Mi nor - - - - - 4.4.2 Dimensi onal exami nati orl. TM spi neboards shall be examined for clofects i n dimensions . be classified as a defect. 9ny dimensi on not wi thi ri the to1 erancs sp
32、eci fi ed herei n sqall 5. PACKAGING 5.1 Packaging. Packaging shall be Level A or Leva! C as specified (sea 5.21. 5.1.1 Jnit of issue. Qlie spineboard of the type specified, constitutes a unit of issue. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,
33、-,-M 1 L - S- 179 53 t rl L 4-DM! 5.1.3 Level A. 5.1.2.2 Unit packaging. Eacb spineboard shall bo clean, dry and wrapped in kraft paper and the wrapping SPCUPP with kraft tapa. 5.1.3 Level C. Each unit shall be packagetri as specified in 5.1.2=1* ri.? Packing. 5.2.1 Level A. One spineboard of the to
34、e specified sqall be packed in a shipping container dosignecl for a %ype 3 loqd and confoming to PPP-!3-f3Gi, class weather-resistant. Closure, strapping and waterproofing shall be as specified in the box specification. One spineboard of the type specified s!lall be .packaged in a box desigm a type
35、2 load and conforming to PT-3-635, class domestic. Closure shall be as specified in the box specification. 5.2.2 Level B. 5.2.1 Level C. One spineboard of the type specified shall Se packed in 3 riianner thm afford adequate protection against damage during stiipment from the supply source to the rec
36、eiving activity. This pact shall conform %o the carriers ru1 os and regulations. 5.3 Marking. Marking shall be as specified in MIL-STD-129. 6. NOTES 6.1 to be used, stored, and transported in air and ground ambulances, and to be used, stored, and transported as a part of the equipmont complement of
37、field medical facilities for the care and treatment of patients with back or neck in j wies . Intended Use. The spineboards covered by this specification are intended 5.1.1 Intended Uso, Type I. The long spinehoard is intended for use in the immobilization of patients having uppir an?/or lower back
38、injuries. 6.1.3 Intended Use, Type TI, The short, spineSoard is intmded for use in the extrication and imobilization of patierits having neck injuries. 6.3 Orderin data. Purchasers should select the prefsrred options permitted herein -r+nl an inc u e t e following information on the procurement docu
39、ments: 6.2.1 Title, Number and Date of this Specification. 6.2 -3 Nati onal Stock Number. 6.2.3.1 Dimension. 6.2.3 Selection of Applicable Levels of Packaging - and Packing (see 5.1 and 5.3). 6.2.4 First Article Inspection (see ?.i, 4.1?.1.21. 5 Provided by IHSNot for ResaleNo reproduction or networ
40、king permitted without license from IHS-,-,-6.3 Tbis specification covers the following items appearing in the Federal Supply Cata1 og: National Stock Number Item Identification 6530-01-119-0012 I Spinehoard, Long, Type I 6530-01-119-0011 Spineboard, Short, Type II MItITARY INTERESTS: Preparing activity : Custodians: !IOD-MB ATv-MD Navy-YS A3 r Force-03 Agent: DLA-9M Project No. 6530-1592 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
