1、f .- MILITARY SPECIFICATION TRACTION DEVICE . This specification is mandatory for use by all Departments and Agencies of the Department of Defense. 1. SCOPE Y 1.1 Scope. This specification covers three types of spring-loaded t- traction devices. 1.2 Classification. Type I. 3 pounds. Type II. 5 pound
2、s. Type III. 10 pounds. 2. APPLICABLE DOCUMENTS 2.1 The following documents of the issue in effect on date of = -. invitation for bids or request for proposal, form a part of the specifi- cation to the extent specified herein: SPECIFICATIONS .- Federal QQ-A-22516 PPP-B-566 PPP-B-585 i PPP-B-601 PPP-
3、B-621 PPP-B-636 PPP-B-676 PPP-T-76 Military Aluminum Alloy, Bar, Rod, Wire and Special Shapes, Boxes, Folding, Paperboard. Boxes , Wood, Wirebound. Boxes, Wood, Cleated-Plywood. Boxes, Wood, Nailed and Lock-Comer. Box, Fiberboard. Box, Setup. Tape, Pressure-Sensitive Adhesive Rolled, Drawn or Cold F
4、inished, 2024. Paper, (for Carton Sealing). MIL-L-10547 Liners, Case , and Sheet, Overwrap; Water-Vaporproof or Waterproof, Flexible. -7 .I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-36736 .* STANDARDS Federal FED-STD-66 Steel: Chemical Co
5、mposition and Hardenability. Military MI L-S TD- 10 5 MIL-STD-129 Sampling Procedures and Tables for Marking for Shipment and Storage. Inspection by Attributes. DRAWING Defense Personnel Support Center (DPSC) 25045 Spring Traction Device, Exerciser, 3, 5 may be supplied by the manufacturer of the tr
6、action devices in lieu of actual performance of material testing, provided lot identity has been maintained and can be demonstrated to the Government. The Certificate shall include the name of the contractor, the contract number, the name of the manufacturer or supplier, the FSN; the Item Identifica
7、tion, the name of the component or material, the lot number, the lot size, the sample size, the date of testing, the test method, individual test results, and the specification requirements. -3- Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-mIL-T-3
8、673b 65 U 7777906 0262929 7 Inspection- level MIL-T-36 736 AQL (defects per hundred un ts ) 4.2 Sampling. 4.2.1 For examination. Sampling for examination shall be conducted in accordance with MIL-STD-105, and Table I. For visual examination Major defects - Minor defects I I 1.0 2.5 2.5 I s-2 I For d
9、imensional examination. 4.2.2 For tests. All units chal be tested as specified herein. The AQL shall be 1. 4.3 Examination. The units shall be examined to determine compliance with ail requirements contained in this specification. 4,3.1 Classification of defects. Examination shall be conducted in ac
10、cordance with the classification of defects in Table II. Table II. Categories Defects * Major 101 Traction device not complete. 102 Parts loose, broken or damaged. 10 3 10 4 Traction spring active excursion less than 57 inches. Constant force spring rating does not match case marking. Minor 20 1 20
11、2 Traction device not clean. 203 Case or clip not free of sharp edges. Identification marking missing, incomplete or illegible. * Examination shall not be restricted to the classified possible defects listed above. 4.3.2 Dimensional examination The traction device shall be examined for defects in di
12、mension. on the drawing shall be classified as a defect. Any dimension not within the tolerance specified 4.4 Tests. Tests shall be conducted to determine compliance with specification requirements. -4- Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,
13、-MIL-T-36736 65 m 7777906 0262425 7 m Unit package 1 unit Ml L-T- 36 7 36 Intermediate Exterior package container Not required 10 units 4.4.1 Spring force. the force exerted by their springs. A calibrated spring scale, attached to the end of the traction cable, shall be used for measuring the force.
14、 The force measured from the end of the cable when it is extended 18 inches from the case shall be recorded. The test shall be repeated for extensions of 36 inches and 54 inches. The traction devices shall be tested to determine si 4.4.2 Cable sleeve strength. The cable shall be attached to the swag
15、ed sleeve as shown on DPSC Drawing 25045. a 50 - + 1 pound pull shall be applied through the cable. With the sleeve clamped in place 5. PREPARATION FY)R DELIVERY 5.1 Packaging. Packaging shall be level A or C as specified (see 6.2). 5.1.1 Unit of issue. One traction device, as specified, constitutes
16、 . one unit of issue. 5.1.2 Packaging quantities. The number of units of issue indicated in the following table shall be packaged in each unit, intermediate, and exterior container, as applicable, for the required level of protection specified in the procurement document. I I 5.1.2.1 Packing variati
17、on permitted. If the required number of units in the entire shipment is less than the number of units specified to be overpacked in an exterior container, such units may be packed in an exterior container of suitable size and design, acceptable to a common carrier, which shall insure safe delivery t
18、o destination. 5.1.3 Level A. 5.1.3.1 Unit package. Unit package shall be a box of appropriate size and design constructed in accordance with PPP-B-566 or PPP-B-676, except commercial colors will be acceptable, or PPP-B-636, type CF, class domestic. Closure shall be adequate to prevent accidental op
19、ening under normal handling. 5.1.4 Level C. Units shall be packaged in standard commercial containers of the size and kind commonly used, which will afford the degree of pro- tection required for shipment and use of the product for its itended purpose. r i I ! - 5- Provided by IHSNot for ResaleNo re
20、production or networking permitted without license from IHS-,-,- MIL-T-3673b 65 9999906 026242b O = MIL-T- 36 736 . 5.2 Packing. Packing shall be level A, B or C as specified (see 6.2). 5.2.1 Level A. 5.2.1.1 Exterior container. Exterior container shall be designed for a type 2 load and constructed
21、in accordance with PPP-B-585, class 3, style 3; PPP-B-601, overseas type; PPP-B-621, class 2; or PPP-B-636, class weather-resistant, grade V3. Closure and strapping shall be as specified in the appendix of the applicable box specification. 5.2.1.2 Case liner. Each Level A wood box shall be lined wit
22、h a waterproof case liner conforming to MIL-L-10547. conform to applicable paragraphs of appendix thereto. be required for fiberboard boxes. Closure and sealing shall Case liner shall not 5.2.2 Level B. 5.2.2.1 Exterior container. Exterior container shall be designed for a tvDe 2 load and constructe
23、d in accordance with PPP-B-585, class 1, style II 3; PPP-B-601, domestic type; PPP-B-621, class 1; or PPP-B-636, class domestic. box specification. Closure shall be as specified in the appendix of the applicable 5.2.3 Level C. The subject commodity shall be packed in substantial commercial container
24、s of the type, size, and kind commonly used for the purpose, so constructed as to insure acceptance and safe delivery by common or other carriers, at the lowest rate, to point of delivery called for in the contract or purchase order. 5.3 Marking. 5.3.1 Interior packages. Each unit package shall be m
25、arked in accordance with MIL-STD-129. When labels are utilized, waterproofing shall be required only when applicable carton is fabricated of waterlresistant material. - Con- tract or purchase order number and name of contractor shall be shown. 5.3.2 Exterior container. Exterior container shall be ma
26、rked in accordance with MIL-STD-129. 6. NOTES 6.1 Intended use. The traction devices shall be suitable for traction and therapeutic exercise programs in military medical facilities. -6- Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-_._ MIL-T-36736
27、65 9799706 0262427 2 MIL-T-36736 6.2 Ordering data. Procurement documents should specify the following: (a) (b) Number and date of this specification. Selection of applicable levels of packing (see 5.1 and 5.2). 6.3 This specification covers the following items appearing in the Federal Supply Catalo
28、g : Item Federal Stock Number . - 65 30-40 3-3116 TRACTION DEVICE, 3 lb. 6530-16 8-6 815 TRACTION DEVICE, 5 lb. 6530-403-3117 .TRACTION DEVICE, 10 lb. 6.4 This specification does not cover all types, classes, grades, or sizes of the commodity indicated by the title of this specification, or those wh
29、ich are commercially available, but is intended to cover the types which are normally procured to meet Military requirements. Cus todians : Navy - MS Air Force - 03 Army - MD Review activities : Army - MD Navy - MS . Air Force - 03 Preparing activity: Defense Supply Agency - DM Project No. 6530-1198
30、 Review information is current as of the date of this document. For future coordination of changes to this document, draft circulation should be based on the information in the current DODISS. - 7- , - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
