1、 AMSC N/A FSC 5340 MS14271D 28 April 2010 SUPERSEDING MS14271C 30 June 1987 DETAIL SPECIFICATION SHEET HANDLE, COUPLING, PNEUMATIC STARTER This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein
2、shall consist of this specification sheet and MIL-DTL-25531. FIGURE 1. Handle (continued on page 2)INCH-POUND Inactive for new design after 16 June 1997. “SQUEEZE AGAINST RING TO UNLOCK COUPLING” (DECAL) .031 x 45 CHAMFER -4 PIN ( .375 STOCK) 10.13 +.024 - .000 SEE VIEW B - B -8 -3 50606050.040 2.09
3、3 A .12 A -5 LEVER (2) WASHER AN960-616 “LOCATE BACK OF FLANGECLAMP” (DECAL) -1 COUPLING HANDLEBB 5.00 .188.6261.250 -3 2.500 1.253.121.75.250.12 3 PLACES .375 +.007 - .000 3 PLACES .375 -3 SUPPORT45-2 RING (.750 O.D. x .062 WALL) 2.66SECTION A - A .375 ENLARGED VIEW Provided by IHSNot for ResaleNo
4、reproduction or networking permitted without license from IHS-,-,-MS14271D 2 FIGURE 1. Handle (continued) REQUIREMENTS: 1. MATERIAL: For -2 steel, tubing, carbon (1020) in accordance with SAE AMS-T-5066. For -3 and -8 steel, strip, carbon (1020) in accordance with SAE AMS 5046. For -4 and -7 steel,
5、bar, carbon (1018) in accordance with ASTM A108. For -6 steel, plate, carbon (1020) in accordance with ASTM A827/A827M. 2. PROTECTIVE FINISH: Cadmium plate per SAE-AMS-QQ-P-416, Class 2, Type II; paint two coats zinc chromate primer per TT-P-1757 and two cover coats orange yellow gloss enamel per Ma
6、ster Painters Institute, Reference #9, Alkyd, Exterior, Gloss, (MPI Gloss Level 6). NOTES: 1. Dimensions are in inches. Unless otherwise specified, tolerance: Decimal .XX - .03, .XXX - .010, Angle 1. 2. Remove burrs and break all sharp edges R .015 max. 3. Welding shall be in accordance with AWS D17
7、.1. 4. For design feature purposes, this standard takes precedence over procurement documents referenced herein. 5. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of changes. Custodians: Preparing
8、 activity: Navy -AS DLA IS Air Force 84 (Project 5340-2010-009) Review activity: Air Force - 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information a
9、bove using the ASSIST Online database at https:/assist.daps.dla.mil R .2502.000.2502.250 .375.750R1.000-8 CAP (.625 x .062 THK) VIEW B - B .12 -5 LEVER 2.68 1.34 .406 THRU IN LINE -7 .375 SPHERE R -6 .06 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
