1、 DETAIL SPECIFICATION SHEET ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 45-DEG., STREET, CLASS 125 This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet a
2、nd WW-P-460. Auxiliary view to references the inside diameter for dimension L and N only. FIGURE 1. Street elbow fitting. AMSC N/A FSC 4730 INCH-POUND MS14307C 15 December 2009 SUPERSEDING MS14307B 28 February 1994 45-DEG STREET ELBOW AUXILIARY VIEW 45 C K L E L N G FACE SQUARE OR BEVELED NOT MORE T
3、HAN 5 B Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS14307C 2 Dash number to pipe size. Dash number Pipe size mm - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 1/8 (.125) 1/4 (.250) 3/8 (.375) 1/2 (.500) 3/4 (.750) 1 (1.000) 1-1/4 (1.250) 1-1/2 (1.500) 2 (
4、2.000) 3.18 6.35 9.53 12.70 19.05 25.40 31.75 38.10 50.80 NOTES: 1. Metric equivalents are given for information only. 2. Material: Brass or bronze in accordance with ASME-B16.15. 3. Protective Coating: None 4. Dimensions: In accordance with ASME-B16.15, table titled “Dimensions of 90-deg and 45-deg
5、 Street Elbows Class 125”. 5. Thread: As specified in ASME-B16.15. 6. Marking: In accordance with ASME-B16.15. 7. Part or Identifying Number (PIN): The MS PIN consists of the MS number, the dash number, and the fitting Identification letter(s). When left-hand threads are required, add the letter “L”
6、 to the PIN. FIGURE 1. Street elbow fitting Continued. PIN: MS 14307 -3 X L Examples: MS14307 - 5 represents a 3/4 NPS 45-deg street elbow. MS14307 - 9L represents a 2 NPS 45-deg street elbow, left-hand threads. MS prefix Basic specification number Dash number on figure 1 Outside head, inside head,
7、face designator, see figure 1 Thread designator: Blank right hand thread, L- left hand thread Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS14307C 3 Changes from previous issue. Marginal notations are not used in this revision to identify changes
8、 with respect to the previous issue, due to the extent of the changes. Referenced documents. In addition to WW-P-460, this document references the following: ASME-B16.15 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AT DLA - CC Navy - MC Air Force - 99 DLA - CC (Project 4730-2009-005) R
9、eview activities: Army - AR, CE, EA Navy SA, SH, YD Air Force - 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
