1、 DETAIL SPECIFICATION SHEET TEES, PIPE, BRASS OR BRONZE, THREADED, REDUCING, CLASS 125 This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and WW-P-4
2、60. FIGURE 1. Reducing tee fitting. AMSC N/A FSC 4730 INCH-POUND MS14309D 15 December 2009 SUPERSEDING MS14309C 28 February 1994 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS14309D 2 Dash number to pipe size. Dash number Pipe size mm - 1 - 2 - 3
3、 - 4 - 5 - 6 - 7 - 8 - 9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 1/4 X 1/4 X 1/8 (.250 X .250 X .125) 3/8 X 3/8 X 1/4 (.375 X .375 X .250) 3/8 X 1/4 X 3/8 (.375 X .250 X .375) 3/8 X 1/4 X 1/4 (.375 X .250 X .250) 1/2 X 1/2 X 3/8 (.500 X .500 X .375) 1/2 X
4、1/2 X 1/4 (.500 X .500 X .250) 1/2 X 3/8 X 1/2 (.500 X .375 X .500) 1/2 X 3/8 X 3/8 (.500 X .375 X .375) 3/8 X 3/8 X 1/2 (.375 X .375 X .500) 3/4 X 3/4 X 1/2 (.750 X .750 X .500) 3/4 X 3/4 X 3/8 (.750 X .750 X .375) 3/4 X 1/2 X 3/4 (.750 X .500 X .750) 3/4 X 1/2 X 1/2 (.750 X .500 X .500) 1/2 X 1/2
5、X 3/4 (.500 X .500 X .750) 1 X 1 X 3/4 (1.000 X 1.000 X .750) 1 X 1 X 1/2 (1.000 X 1.000 X .500) 1 X 1 X 3/8 (1.000 X 1.000 X .375) 1 X 3/4 X 1 (1.000 X .750 X 1.000) 1 X 3/4 X 3/4 (1.000 X .750 X .750) 1 X 3/4 X 1/2 (1.000 X .750 X .500) 1 X 1/2 X 1 (1.000 X .500 X 1.000) 1 X 1/2 X 3/4 (1.000 X .50
6、0 X .750) 3/4 X 3/4 X 1 (.750 X .750 X 1.000) 1-1/4 X 1-1/ 4 X 1 (1.250 X 1.250 X 1.000) 1-1/4 X 1-1/4 X 3/4 (1.250 X 1.250 X .750) 1-1/4 X 1-1/4 X 1/2 (1.250 X 1.250 X .500) 1-1/4 X 1 X 1-1/4 (1.250 X 1.000 X 1.250) 1-1/4 X 1 X 1 (1.250 X 1.000 X 1.000) 6.35 X 6.35 X 3.18 9.53 X 9.53 X 6.35 9.53 X
7、6.35 X 9.53 9.53 X 6.35 X 6.35 12.70 X 12.70 X 9.53 12.70 X 12.70 X 6.35 12.70 X 9.53 X 12.70 12.70 X 9.53 X 9.53 9.53 X 9.53 X 12.70 19.05 X 19.05 X 12.70 19.05 X 19.05 X 9.53 19.05 X 12.70 X 19.05 19.05 X 12.70 X 12.70 12.70 X 12.70 X 19.05 25.40 X 25.40 X 19.05 25.40 X 25.40 X 12.70 25.40 X 25.40
8、 X 9.53 25.40 X 19.05 X 25.40 25.40 X 19.05 X 19.05 25.40 X 19.05 X 12.70 25.40 X 12.70 X 25.40 25.40 X 12.70 X 19.05 19.05 X 19.05 X 25.40 31.75 X 31.75 X 25.40 31.75 X 31.75 X 19.05 31.75 X 31.75 X 12.70 31.75 X 25.40 X 31.75 31.75 X 25.40 X 25.40 FIGURE 1. Reducing tee fitting Continued. Provided
9、 by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS14309D 3 Dash number to pipe size. Dash number Pipe size mm - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 1-1/4 X
10、1 X 3/4 (1.250 X 1.000 X .750) 1-1/4 X 3/4 X 1-1/4 (1.250 X .750 X 1.250) 1-1/4 X 1/2 X 1-1/4 (1.250 X .500 X 1.250) 1 X 1 X 1-1/4 (1.000 X 1.000 X 1.250) 1-1/2 X 1-1/2 X 1-1/4 (1.500 X 1.500 X 1.250) 1-1/2 X 1-1/2 X 1 (1.500 X 1.500 X 1.000) 1-1/2 X 1-1/2 X 3/4 (1.500 X 1.500 X .750) 1-1/2 X 1-1/2
11、X 1/2 (1.500 X 1.500 X .500) 1-1/2 X 1-1/4 X 1-1/2 (1.500 X 1.250 X 1.500) 1-1/2 X 1-1/4 X 1-1/ 4 (1.500 X 1.250 X 1.250) 1-1/2 X 1-1/4 X 1 (1.500 X 1.250 X 1.000) 1-1/2 X 3/4 X 1-1/2 (1.500 X .750 X 1.500) 1-1/4 X 1-1/4 X 1-1/2 (1.250 X 1.250 X 1.500) 1 X 1 X 1-1/2 (1.000 X 1.000 X 1.500) 2 X 2 X 1
12、-1/2 (2.000 X 2.000 X 1.500) 2 X 2 X 1-1/4 (2.000 X 2.000 X 1.250) 2 X 2 X 1 (2.000 X 2.000 X 1.000) 2 X 2 X 3/4 (2.000 X 2.000 X .750) 2 X 1-1/2 X 2 (2.000 X 1.500 X 2.000) 2 X 1-1/2 X 1-1/2 (2.000 X 1.500 X 1.500) 1-1/2 X 1-1/2 X 2 (1.500 X 1.500 X 2.000) 2-1/2 X 2-1/2 X 2 (2.500 X 2.500 X 2.000)
13、2-1/2 X 2 X 2 (2.500 X 2.000 X 2.000) 2 X 2 X 2-1/2 (2.000 X 2.000 X 2.500) 3 X 3 X 2-1/2 (3.000 X 3.000 X 2.500) 3 X 3 X 2 (3.000 X 3.000 X 2.000) 4 X 4 X 3 (4.000 X 4.000 X 3.000) 4 X 4 X 2 (4.000 X 4.000 X 2.000) 31.75 X 25.40 X 19.05 31.75 X 19.05 X 31.75 31.75 X 12.70 X 31.75 25.40 X 25.40 X 31
14、.75 38.10 X 38.10 X 31.75 38.10 X 38.10 X 25.40 38.10 X 38.10 X 19.05 38.10 X 38.10 X 12.70 38.10 X 31.75 X 38.10 38.10 X 31.75 X 31.75 38.10 X 31.75 X 25.40 38.10 X 19.05 X 38.10 31.75 X 31.75 X 38.10 25.40 X 25.40 X 38.10 50.80 X 50.80 X 38.10 50.80 X 50.80 X 31.75 50.80 X 50.80 X 25.40 50.80 X 50
15、.80 X 19.05 50.80 X 38.10 X 50.80 50.80 X 38.10 X 38.10 38.10 X 38.10 X 50.80 63.50 X 63.50 X 50.80 63.50 X 50.80 X 50.80 50.80 X 50.80 X 63.50 76.20 X 76.20 X 63.50 76.20 X 76.20 X 50.80 101.60 X 101.60 X 76.20 101.60 X 101.60 X 50.80 NOTES: 1. Metric equivalents are given for information only. 2.
16、Material: Brass or bronze in accordance with ASME-B16.15. 3. Protective Coating: None 4. Dimensions: In accordance with ASME-B16.15, table titled “Dimensions of Tees (Reducing Sizes) Class 125”. 5. Thread: As specified in ASME-B16.15. 6. Marking: In accordance with ASME-B16.15. 7. Part or Identifyin
17、g Number (PIN): The MS PIN consists of the MS number, the dash number, and the fitting Identification letter(s). When left-hand threads are required, add the letter “L” to the PIN. FIGURE 1. Reducing tee fitting Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without
18、license from IHS-,-,-MS14309D 4 PIN: MS 14309 -3 X L Examples: MS14309 - 20 represents a 1 NPS X 3/4 NPS X 1/2 NPS reducing tee. MS14309 - 9L represents a 3/8 NPS X 3/8 NPS X 1/2 NPS reducing tee, left-hand threads. Changes from previous issue. Marginal notations are not used in this revision to ide
19、ntify changes with respect to the previous issue, due to the extent of the changes. Referenced documents. In addition to WW-P-460, this document references the following: ASME-B16.15 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AT DLA - CC Navy - MC Air Force - 99 DLA - CC (Project 473
20、0-2009-007) Review activities: Army - AR, CE, EA Navy SA, SH, YD Air Force - 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the A
21、SSIST Online database at http:/assist.daps.dla.mil MS prefix Basic specification number Dash number on figure 1 Outside head, inside head, face designator, see figure 1 Thread designator: Blank right hand thread, L- left hand thread Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
