1、 DETAIL SPECIFICATION SHEET CAPS, PIPE, BRASS OR BRONZE, THREADED, CLASS 125 This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and WW-P-460. FIGURE
2、 1. Cap fittings. AMSC N/A FSC 4730 INCH-POUND MS14310C 15 December 2009 SUPERSEDING MS14310B 28 February 1994 F G 4 H E B G 3 D R P G 4 G B 1 G 1 B CAST CAPS - FITTING TYPE AND SIZE APPLICABILITY G 4 P G 4 B P WROUGHT CAP Provided by IHSNot for ResaleNo reproduction or networking permitted without
3、license from IHS-,-,-MS14310C 2 Fitting type and size applicability. Dash number Pipe size mm Cast Wrought - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 1/8 (.125) 1/4 (.250) 3/8 (.375) 1/2 (.500) 3/4 (.750) 1 (1.000) 1-1/4 (1.250) 1-1/2 (1.500) 2 (2.000) 2-1/2 (2.500) 3 (3.000) 4 (4.000) 3.18
4、6.35 9.53 12.70 19.05 25.40 31.75 38.10 50.80 63.50 76.20 101.60 X X X X X X X X X X X X X X X X X . . . . . . . NOTES: 1. Metric equivalents are given for information only. 2. Material: Brass or bronze in accordance with ASME-B16.15. 3. Protective Coating: None 4. Dimensions: In accordance with ASM
5、E-B16.15, table titled “Dimensions of Caps Class 125”. 5. Thread: As specified in ASME-B16.15. 6. Marking: In accordance with ASME-B16.15. 7. Part or Identifying Number (PIN): The MS PIN consists of the MS number, the dash number, and the fitting Identification letter(s). When left-hand threads are
6、required, add the letter “L” to the PIN. FIGURE 1. Cap fittings Continued. PIN: MS 14310 -3 X L Examples: MS14310 - 9 represents a 2 NPS Cast Cap. MS14310 - 5L represents a 3/4 NPS wrought or cast cap, left-hand threads. MS prefix Basic specification number Dash number on figure 1 Outside head, insi
7、de head, face designator, see figure 1 Thread designator: Blank right hand thread, L- left hand thread Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS14310C 3 Changes from previous issue. Marginal notations are not used in this revision to identif
8、y changes with respect to the previous issue, due to the extent of the changes. Referenced documents. In addition to WW-P-460, this document references the following: ASME-B16.15 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AT DLA - CC Navy - MC Air Force - 99 DLA - CC (Project 4730-20
9、09-008) Review activities: Army - AR, CE, EA Navy SA, SH, YD Air Force - 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
