1、 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, BOX MOUNTING, FLANGE, BAYONET COUPLING, SOLDER CONTACT, SERIES 1 This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall cons
2、ist of this specification sheet and MIL-DTL-26482. FIGURE 1. Receptacle. AMSC N/A FSC 5935 Inactive for new design after 15 December 1998. For new design, use MS3470. INCH-POUNDMS3112H 1 March 2007 SUPERSEDING MS3112G 30 July 1979 Provided by IHSNot for ResaleNo reproduction or networking permitted
3、without license from IHS-,-,-MS3112H 2FIGURE 1. Receptacle - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS3112H 3FIGURE 1. Receptacle - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license fr
4、om IHS-,-,-MS3112H 4Shell size A max length B (TP) - mounting holes C + .031 - .016 OD F + .031 - .000 mounting flange location G .016 thick mounting flange H .005 dia mounting holes 8 .828 (21.03) .594 (15.09) .438 (11.12) 10 .954 (24.23) .719 (18.26) .562 (14.27) 12 1.047 (26.59) .812 (20.62) .688
5、 (17.48) 14 1.141 (28.98) .906 (23.01) .812 (20.62) 16 1.234 (31.34) .969 (24.61) .938 (23.83) 18 1.328 (33.73) 1.062 (26.97)1.062 (26.97).431 (10.95) .062 (1.57) 20 1.453 (36.91) 1.156 (29.36)1.188 (30.18)22 1.578 (40.08) 1.250 (31.75)1.312 (33.32).556 (14.12) .120 (3.05) 24 1.703 (43.26) 1.375 (34
6、93)1.438 (36.53).589 (14.96) .094 (2.39) .147 (3.73) Shell size J max L max overall length N UNEF-2A thread optional P min edge distance R max packing ring S max 8 .4375-28 .329 (8.36) 10 .5625-24 .457 (11.61) 12 .6875-24 .564 (14.33) 14 .8125-20 .689 (17.50) 16 .9375-20 .814 (20.68) 18 .354 (8.99)
7、 .978 (24.84) 1.0625-18 .035 (0.89) .907 (23.04) .087 (2.21) 20 1.1875-18 1.039 (26.39) 22 .417 (10.59) 1.3125-18 1.164 (29.57) 24 .445 (11.30) 1.196 (30.38)1.4375-18 .050 (1.27) 1.289 (32.74) .212 (5.38) FIGURE 1. Receptacle - Continued. Provided by IHSNot for ResaleNo reproduction or networking pe
8、rmitted without license from IHS-,-,-MS3112H 5Inches mm Inches mm .005 0.13 .020 0.51 .010 0.25 .031 0.79 .015 0.38 .070 1.78 .016 0.41 .156 3.96 NOTES: 1. Dimensions are in inches. Metric equivalents are given for information only. 2. True position (TP) tolerances specified are in accordance with A
9、SME Y14.5M. FIGURE 1. Receptacle - Continued. REQUIREMENTS: Dimensions and configurations: See figure 1. Connector mating: This connector mates with MS3111, MS3116, MS3121 and MS3126. For insert arrangement: See MIL-STD-1669. Intermateability dimensions are in accordance with MIL-DTL-26482. Part or
10、Identifying Number (PIN) example: MS3112 F 12 -3 P W MS number Class Shell size Insert arrangement Contact style Alternate insert position Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the cha
11、nges. Referenced documents. In addition to MIL-DTL-26482, this document references the following: MS3111 MS3116 MS3121 MS3126 MS3470 MIL-STD-1669 ASME Y14.5M Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS3112H 6CONCLUDING MATERIAL Custodians: Pre
12、paring activity: Army CR DLA CC Navy AS Air Force 11 DLA CC (Project 5935-4656-003) Review activities: Army AV Navy SH NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
