1、MS3476F INCH-POUND4 June 2009 SUPERSEDING MS3476E 31 October 1988 DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, SERIES 2, CRIMP TYPE, BAYONET COUPLING, CLASSES A, D, L, T, W AND Z Reactivated after 4 June 2009, and may be used for new or existing designs and acquisitions. This specificati
2、on is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-26482. NOTE: For “XX”, note 5 and table I for contact cavities requiring reduced dimensions. FIGURE 1
3、. Plug, dimensions. AMSC N/A FSC 5935 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS3476F 2FIGURE 1. Plug, dimensions - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS3476F 3FIGURE 1
4、. Plug, dimensions - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS3476F 4FIGURE 1. Plug, dimensions - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS3476F 5Max weight In
5、lbs. (grams) 1/ Shell size A F S V V V” W Pin Socket 8 .782 (19.86) .830 (21.08) .0204 (9.26) .0216 (9.81) 10 .926 (23.52) 2.130 (54.10) .880 (22.35) .0406 (18.43) .0421 (19.11) 12 1.043 (26.49) 1.857 (47.17) 2.265 (57.53) .950 (24.13) .0505 (22.93) .0536 (24.33) 14 1.183 (30.05) 2.355 (59.82) 1.010
6、 (25.65) .0639 (29.01) .0692 (31.42) 16 1.305 (33.15) 2.490 (63.25) 1.070 (27.18) .0788 (35.77) .0880 (39.95) 18 1.391 (35.33) .887 (22.53) .363 (9.22) .343 (8.71) 2.589 (65.76) 1.130 (28.70) .0864 (39.22) .0957 (43.44) 20 1.531 (38.89) 2.722 (69.14) 1.190 (30.23) .1016 (46.12) .1114 (50.57) 22 1.65
7、6 (42.06) 2.845 (72.26) 1.260 (32.00) .1241 (56.34) .1363 (61.88) 24 1.777 (45.14) .825 (20.96) .425 (10.80) .405 (10.29) 1.507 (38.28) 2.092 (53.14) 2.967 (75.36) 1.320 (33.53) .1400 (63.56) .1916 (86.98) 1/ Less contacts and accessories. Maximum weights do not apply to class S. Inches mm Inches mm
8、 Inches mm .008 0.20 .065 1.66 .225 5.72 .010 0.25 .069 1.75 .269 6.83 .025 0.64 .087 2.21 .320 8.13 .029 0.74 .097 2.46 .337 8.56 .032 0.81 .101 2.57 .357 9.07 .042 1.07 .141 2.72 .399 10.13 .045 1.14 .200 5.08 .419 10.64 .046 1.17 .210 5.33 1.230 31.24 NOTES: 1. Dimensions are in inches. Metric eq
9、uivalents are given for information only and are in parentheses. 2. Unless otherwise specified, tolerances are .005 (0.13 mm) for 3 place decimals, .01 (0.3 mm) for 2 place decimals, and 1 for all angles. 3. Color bands: 0.070 .031 (1.78 0.79 mm) wide, color blue. 4. Connector assembly must be used
10、with a backshell. Backshells must be procured separately. See SAE-AS85049 for applicable backshells. 5. Insert arrangements requiring reduced diameters for raised seal barrier on outer row of contact cavities as indicated. FIGURE 1. Plug, dimensions - Continued. Provided by IHSNot for ResaleNo repro
11、duction or networking permitted without license from IHS-,-,-MS3476F 6TABLE I. Contact cavities requiring reduced diameters (XX) for pins and sockets in outer row of contact cavities. 1/ Shell size Insert arrangement Contact Cavities 8 -33 & -98 A, B, C 12 -10 C, G 14 -12 A, B, C, D, E, F, G, H 14 -
12、18 A, C, E, G, J, L 14 -19 B, D, F, H, K, M 16 -26 A, B, C, D, E, F, G, H, J, K, L, M, N, P, R 18 -32 A, B, C, D, E, F, G, H, J, K, L, M, N, P, R, S, T 22 -41 A, B, C, D, E, F, G, H, J, K, L, M, N, P, R, S, T, U, V, W, X, Y 1/ The reduced diameter “XX” refers to the diameters of the raised seal barr
13、iers (pin barrier rings) or lead- in chamfers (socket entry holes) to ensure proper sealing of pin and socket after mating. See MIL-DTL-26482, connector intermateability control dimensions (series 1 and series 2) figure for reduced diameter “XX” for contact size 20 only. REQUIREMENTS: Dimensions and
14、 configuration: See figure 1 and table I. Connector mating: This connector mates with MS3470, MS3471, MS3472, MS3473, MS3474, MS3477 and MS3479. Also, they will mate with MS3115 (dummy stowage receptacle) and with the following series 1 receptacles, provided both mating connectors contain a full com
15、pliment of power contacts: MS3100, MS3112, MS3113, MS3114, MS3119, MS3120, MS3122, MS3124, MS3127 and MS3128. Intermateability and rear accessory interchangeability dimensions are in accordance with MIL-DTL-26482. Class E is cancelled and replaced by class L. This specification sheet supersedes, MIL
16、-C-83723/13 and MIL-C-83723/14. For insert arrangement, see MIL-STD-1669. Insert arrangements requiring reduced diameters for raised seal barriers or lead-in chamfer on outer row of contact cavities as indicated, see table I. Connector identification marking shall be in accordance with MIL-DTL-26482
17、. Example: MS3476L-, minimum height does not apply to shell sizes 8, 10 and 12. Part or Identifying Number (PIN) example: MS3476 L 24 - 61 P W MS number Class Shell size Insert arrangement Contact style Alternate insert position Provided by IHSNot for ResaleNo reproduction or networking permitted wi
18、thout license from IHS-,-,-MS3476F 7Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-26482, this document references the following: MS310
19、0 MS3112 MS3113 MS3114 MS3115 MS3119 MS3120 MS3122 MS3124 MS3127 MS3128 MS3470 MS3471 MS3472 MS3473 MS3474 MS3477 MS3479 MIL-STD-1669 SAE-AS85049 CONCLUDING MATERIAL Custodians: Preparing activity: Army CR DLA CC Navy AS Air Force 85 (Project: 59352007-188) DLA CC Review activities: Army AR, AV Navy
20、 EC, SH Air Force 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
