DL T 372-2010 General technical specification for pullers pulling conductors under controlled tension of overhead transmission line《输电线路张力架线用牵引机通用技术条件》.pdf

相关资源

DL T 880-2021 带电作业用导线软质遮蔽罩.pdf

DL T 887-2024 杆塔工频接地电阻测量方法.pdf

DL T 939-2024 火力发电厂锅炉受热面管监督技术标准.pdf

DL T 647-2024 电站锅炉压力容器检验规程.pdf

DL T 822-2024 水电厂计算机监控系统试验验收规程.pdf

DL T 838-2024 燃煤火力发电企业设备检修导则.pdf

DL T 849.4-2024 电力设备专用测试仪器通用技术条件 第4部分：超低频高压发生器.pdf

DL T 683-2024 电力金具型号命名方法.pdf

DL T 824-2023 汽轮机电液调节系统性能验收导则.pdf

DL T 895-2024 除灰除渣系统运行导则.pdf

猜你喜欢

BS 5667-3-1979 Specification for continuous mechanical handling equipment - safety requirements - Loose bulk materials storage equipment fed by a pneumatic handling system《连续式机械装卸设.pdf

BS 5667-5-1979 Specification for continuous mechanical handling equipment - safety requirements - Loose bulk materials couplings and hose components used in pneumatic handling《连续式机.pdf

BS 5668-1-2000 Routine analytical cigarette smoking machine - Definitions and standard conditions《常规分析卷烟发烟器 定义与标准条件》.pdf

BS 567-1973 Specification for asbestos-cement flue pipes and fittings light quality《轻型石棉水泥烟道管及配件规范》.pdf

BS 5671-1979 Guide for commissioning operation and maintenance of hydraulic turbines《水轮机交付使用、操作与维修指南》.pdf

BS 5672-1991 Specification for designation of the direction of rotation and of cylinders and valves in cylinder heads and definition of right-hand and left-hand in-line engines and.pdf

BS 5677-1979 Method (precision) for pressure calibration of one-inch standard condenser microphones by the reciprocity technique《采用互易技术对1英寸标准电容式传声器进行压力校准的精确方法》.pdf

BS 5682-2015 Dimensions of probes and terminal units for medical gas supply systems Requirements《医疗供气系统用探测器和终端装置尺寸 要求》.pdf

BS 5686-1986 Specification for straight-sided splines for cylindrical shafts metric nominal dimensions tolerances and gauging requirements《圆柱轴直边花键规范 米制公称尺寸、公差和测量要求》.pdf