DL T 5446-2012 Regulation for content and depth of feasibility study report of power system dispatch automation engineering《电力系统调度自动化工程可行性研究报告内容深度规定》.pdf

相关资源

DL T 880-2021 带电作业用导线软质遮蔽罩.pdf

DL T 887-2024 杆塔工频接地电阻测量方法.pdf

DL T 939-2024 火力发电厂锅炉受热面管监督技术标准.pdf

DL T 647-2024 电站锅炉压力容器检验规程.pdf

DL T 822-2024 水电厂计算机监控系统试验验收规程.pdf

DL T 838-2024 燃煤火力发电企业设备检修导则.pdf

DL T 849.4-2024 电力设备专用测试仪器通用技术条件 第4部分：超低频高压发生器.pdf

DL T 683-2024 电力金具型号命名方法.pdf

DL T 824-2023 汽轮机电液调节系统性能验收导则.pdf

DL T 895-2024 除灰除渣系统运行导则.pdf

猜你喜欢

AGMA 915-3-A99-1999 Inspection Practices - Gear Blanks Shaft Center Distance and Parallelism《齿轮毛坯 轴中心距和平行距的检验规定》.pdf

AGMA 917-B97-1997 Design Manual for Parallel Shaft Fine-Pitch Gearing《平行轴小模数齿轮装置的设计手册[替代 AGMA 370.01]》.pdf

AGMA 918-A93-1993 Summary of Numerical Examples Demonstrating the Procedures for Calculating Geometry Factors for Spur and Helical Gears《直齿轮和螺旋齿轮用计算几何系数的数字示例演示程序摘要》.pdf

AGMA 919-1-A14-2014 Condition Monitoring and Diagnostics of Gear Units and Open Gears Part 1 - Basics.pdf

AGMA 91FTM1-1991 CNC Bevel Gear Generators and Flared Cup Formate Gear Grinding《计算机数控(CNC)锥齿轮发电机和扩口杯甲酸盐齿轮磨削》.pdf

AGMA 91FTM10-1991 Dynamic Measurements of Gear Tooth Friction and Load《齿轮齿摩擦和负荷的动态测量》.pdf

AGMA 91FTM11-1991 Initial Design of Gears Using Artificial Neural Net《用人工神经网络进行齿轮的初始设计》.pdf

AGMA 91FTM12-1991 The Combined Mesh Stiffness Characteristics of Straight and Spiral Bevel Gears《直齿伞齿轮和螺旋伞齿轮的结合啮合硬度特性》.pdf

AGMA 91FTM13-1991 Separation of Lubrication and Cooling in Oil-Jet Lubricated Gears《油喷式润滑齿轮的润滑和冷却的分离》.pdf