DL T 5723-2015 Safety operation code for construction equipment of hydropower and water conservancy engineering crawler spreader《水电水利工程施工机械安全操作规程 履带式布料机》.pdf

相关资源

DL／T 802.8-2023 电力电缆导管技术条件 第8部分：塑钢复合电缆导管.pdf

DL／T 802.7-2023 电力电缆导管技术条件 第7部分：非开挖用塑料电缆导管.pdf

DL／T 802.4-2023 电力电缆导管技术条件 第4部分：波纹类塑料电缆导管.pdf

DL／T 846.14-2023 高电压测试设备通用技术条件 第14部分：绝缘油介质损耗因数及体积电阻率测试仪.pdf

DL／T 578-2023 水电厂计算机监控系统基本技术条件.pdf

DL／T 2617-2023 20kV配电线路带电作业技术规范.pdf

DL／T 802.3-2023 电力电缆导管技术条件 第3部分：实壁类塑料电缆导管.pdf

DL／T 669-2023 电力行业高温作业分级.pdf

DL／T 2611-2023 火力发电厂燃煤锅炉炉管泄漏检测系统技术规范.pdf

DL／T 2620-2023 汽轮机高压调节阀流量特性测试技术导则.pdf

猜你喜欢

ASTM C1245 C1245M-2006 Standard Test Method for Determining Bond Strength Between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures (Point Load Test)《测定硬化.pdf

ASTM C1245 C1245M-2011 Standard Test Method for Determining Bond Strength Between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures (Point Load Test)《测定硬化.pdf

ASTM C1245 C1245M-2012 Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test)《测定硬化碾压混凝土和其他硬化粘结混合物间粘合强度的标准试验方.pdf

ASTM C1246-2000(2006) Standard Test Method for Effects of Heat Aging on Weight Loss Cracking and Chalking of Elastomeric Sealants After Cure《弹性体密封剂凝固后热老化对重量损失、裂开和粉化影响的标准试验方法》.pdf

ASTM C1246-2000(2012) Standard Test Method for Effects of Heat Aging on Weight Loss Cracking and Chalking of Elastomeric Sealants After Cure 《弹性体密封剂凝固后热老化对重量损失、裂开和粉化影响的标准试验方法》.pdf

ASTM C1246-2017 Standard Test Method for Effects of Heat Aging on Weight Loss Cracking and Chalking of Elastomeric Sealants After Cure《固后弹性体密封剂热老化影响重量损失 开裂和粉化的标准试验方法》.pdf

ASTM C1247-1998(2004) Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids《连续浸液的密封剂寿命标准试验方法》.pdf

ASTM C1247-2009 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids《连续浸液的密封剂寿命的标准试验方法》.pdf

ASTM C1247-2014 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids《连续浸液的密封剂寿命标准试验方法》.pdf