DL T 648-2014 Impeller powder feeder《叶轮给粉机》.pdf

相关资源

DL／T 802.8-2023 电力电缆导管技术条件 第8部分：塑钢复合电缆导管.pdf

DL／T 802.7-2023 电力电缆导管技术条件 第7部分：非开挖用塑料电缆导管.pdf

DL／T 802.4-2023 电力电缆导管技术条件 第4部分：波纹类塑料电缆导管.pdf

DL／T 846.14-2023 高电压测试设备通用技术条件 第14部分：绝缘油介质损耗因数及体积电阻率测试仪.pdf

DL／T 578-2023 水电厂计算机监控系统基本技术条件.pdf

DL／T 2617-2023 20kV配电线路带电作业技术规范.pdf

DL／T 802.3-2023 电力电缆导管技术条件 第3部分：实壁类塑料电缆导管.pdf

DL／T 669-2023 电力行业高温作业分级.pdf

DL／T 2611-2023 火力发电厂燃煤锅炉炉管泄漏检测系统技术规范.pdf

DL／T 2620-2023 汽轮机高压调节阀流量特性测试技术导则.pdf

猜你喜欢

ASTM D4776 D4776M-2010 Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure《H-试验法测定轮胎帘布和其他增强帘布对橡胶化合物的粘附性的标准试验方法》.pdf

ASTM D4776 D4776M-2018 Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure《用H试验程序测定轮胎帘线和其他增强帘线与橡胶混合物粘合性的标准试验方法》.pdf

ASTM D4776-2004 Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure《用H-试验法测试轮胎帘布及其他增强软线与橡胶化合物粘着性的标准试验方法》.pdf

ASTM D4776-2004e1 Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure.pdf

ASTM D4778-2005 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions《在传热条件下测定冷却水的腐蚀和污染倾向的标准试验方法》.pdf

ASTM D4778-2010 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions《在热转换条件下测定冷却水的腐蚀和污染倾向的标准试验方法》.pdf

ASTM D4778-2015 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions《测定传热条件下冷却水腐蚀和结垢性的标准试验方法》.pdf

ASTM D4780-1995(2007) Standard Test Method for Determination of Low Surface Area of Catalysts by Multipoint Krypton Adsorption《用多点氪吸附法测定催化剂的低表面面积的标准试验方法》.pdf

ASTM D4780-2012 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption《用多点氪吸附法测定催化剂及催化剂载体的低表面面积的标准试验方法》.pdf