1、 DETAIL SPECIFICATION SHEET CLAMP, WIRE ROPE, SADDLED, SINGLE-GRIP, STEEL, TYPE I (MALLEABLE-IRON AND STEEL SADDLE) This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this s
2、pecification sheet and FF-C-450. Type I, Class 1 FIGURE 1. Clamp, single grip saddled wire rope, carbon steel saddle type I, class 1. AMSC N/A FSC 4030 INCH-POUND MS16842G 16 April 2012 SUPERSEDING MS16842F 9 March 2011 Provided by IHSNot for ResaleNo reproduction or networking permitted without lic
3、ense from IHS-,-,-MS16842G 2 Clamp dimensions and number of carbon steel clamps used. Dash Number Wire rope diameter D Thread minimum U-Bolt length minimum L Weight pounds minimum Recommended number of clamps for each connection 1 1/8 (.125) 12-24 .2160 - 24UNC .72 .05 2 2 3/16 (.188) 1/4-20 .2500 -
4、 20UNC .94 .09 2 3 1/4 (.250) 5/16-18 .3125 -18UNC 1.03 .18 2 4 5/16 (.313) 3/8-16 .3750 -16UNC 1.31 .25 2 5 3/8 (.375) 7/16-14 .4375 -14UNC 1.50 .42 2 6 7/16 (.438) 1/2-13 .5000 -13UNC 1.88 .70 2 7 1/2 (.500) 1/2-13 .5000 -13UNC 1.88 .73 3 23 9/16 (.563) 9/16-12 .5625 -12UNC 2.25 .80 3 8 5/8 (.625)
5、 9/16-12 .5625 -12UNC 2.25 .90 3 9 3/4 (.750) 5/8-11 .6250 -11UNC 2.75 1.50 4 10 7/8 (.875) 3/4-10 .7500 -10UNC 3.12 2.00 4 11 1 (1.00) 3/4-10 .7500 -10UNC 3.50 2.50 5 12 1-1/8 (1.125) 3/4-10 .7500 -10UNC 3.88 3.10 6 13 1-1/4 (1.250) 7/8-9 .8750 - 9UNC 4.25 4.00 7 16 1-3/8 (1.375) 7/8-9 .8750 - 9UNC
6、 4.44 5.20 7 14 1-1/2 (1.500) 7/8-9 .8750 - 9UNC 4.94 5.60 8 17 1-5/8 (1.625) 1-8 1.000 - 8UNC 5.31 7.30 8 15 1-3/4 (1.750) 1-1/8-7 1.125 - 7UNC 5.75 9.80 8 18 2 (2.000) 1-1/4-7 1.250 - 7UNC 6.44 13.40 8 19 2-1/4 (2.250) 1-1/4-7 1.250 - 7UNC 7.125 15.70 8 20 2-1/2 (2.500) 1-1/4-7 1.250 - 7UNC 7.688
7、17.90 9 21 2-3/4 (2.750) 1-1/4-7 1.250 - 7UNC 8.313 22.00 10 22 3 (3.000) 1-1/2-6 1.500 - 6UNC 9.188 32.00 10 23 3-1/2 (3.500) 1-1/2-6 1.500 - 6UNC 10.750 40.00 12 Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm .125 3.18 .563 14.30 1.030 26.16 1.750 44.45 3.120 79.25 5.75 146.05 .188 4.
8、78 .625 15.88 1.125 28.58 1.880 47.75 3.500 88.90 6.44 163.58 .250 6.35 .720 18.29 1.250 31.75 2.000 50.80 3.88 98.55 7.125 180.98 .313 7.95 .750 19.05 1.310 33.27 2.250 57.15 4.25 107.95 7.688 195.28 .375 9.53 .875 22.23 1.375 34.93 2.380 60.45 4.62 117.35 8.313 211.15 .438 11.13 .940 23.88 1.500 3
9、8.10 2.750 69.85 4.94 125.48 9.188 233.38 .500 12.70 1.000 25.40 1.625 41.28 3.000 76.20 5.31 134.87 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. All dimensions are “reference” dimensions. FIGURE 1. Clamp, single grip saddled wire rope, carbon steel sa
10、ddle type I, class 1 Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS16842G 3 Type I, Class 2 FIGURE 2. Clamp, single grip saddled wire rope, malleable iron saddle type I, class 2. Provided by IHSNot for ResaleNo reproduction or networki
11、ng permitted without license from IHS-,-,-MS16842G 4 Clamp dimensions and number of malleable iron clamps used. Dash number Wire rope diameter D Thread minimum U-Bolt length minimum L Weight pounds minimum Recommended number of clamps for each connection 201 3/16 (.188) 10-24 .1900 - 24UNC 0.875 .06
12、 2 202 1/4 (.250) 5/16-18 .3125 -18UNC 1.188 .13 2 203 5/16 (.313) 5/16-18 .3125 -18UNC 1.188 .15 2 204 3/8 (.375) 3/8-16 .3750 -16UNC 1.563 .21 2 205 7/16 (.438) 3/8-16 .3750 -16UNC 1.625 .24 2 206 1/2 (.500) 7/16-14 .4375 -14UNC 2.000 .37 3 207 9/16 (.563) 1/2-13 .5000 -13UNC 2.125 .54 3 208 5/8 (
13、.625) 1/2-13 .5000 -13UNC 2.313 .59 3 209 3/4 (.750) 9/16-12 .5625 -12UNC 2.563 .83 4 210 7/8 (.875) 5/8-11 .6250 -11UNC 3.063 1.25 4 211 1 (1.00) 5/8-11 .6250 -11UNC 3.375 1.50 5 212 1-1/8 (1.125) 3/4-10 .7500 -10UNC 3.875 2.42 6 213 1-1/4 (1.250) 3/4-10 .7500 -10UNC 3.875 2.60 6 214 1-1/2 (1.500)
14、7/8-9 .8750 - 9UNC 4.500 5.00 7 Inches mm Inches mm Inches mm Inches mm Inches mm .188 4.78 .500 12.70 1.000 25.40 1.563 39.70 2.563 65.10 .250 6.35 .563 14.30 1.125 28.58 1.625 41.28 3.063 77.80 .313 7.95 .625 15.88 1.188 30.18 2.000 50.80 3.375 85.73 .375 9.53 .750 19.05 1.250 31.75 2.125 53.98 3.
15、875 98.55 .438 11.13 .875 22.23 1.500 38.10 2.313 58.75 4.500 114.30 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. All dimensions are “reference” dimensions. FIGURE 2. Clamp, single grip saddled wire rope, malleable iron saddle type I, class 2 Continued
16、. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS16842G 5 REQUIREMENTS: Clamps shall be in accordance with figures 1 and 2. Material: Type I, Class 1: Saddles, bolts, and nuts carbon steel shall be in accordance with FF-C-450, type I, class I. Typ
17、e I, Class 2: Bolts, and nuts carbon steel and saddles malleable iron shall be in accordance with FF-C-450, type I, class 2. Protective coating: Finish Code Finish A Protective coating shall be, mechanically deposited zinc coating in accordance with ASTM-B695, class 50, type II, or zinc coated (hot
18、dip galvanized) in accordance with ASTM-A153/A153M or zinc coated (electrodeposited) in accordance with ASTM-B633, Fe/Zn 5, type VI. C Cadmium plated, in accordance with SAE-AMS-QQ-P-416, type II, class 3. Z1 Zinc coating, hot-dip, in accordance with ASTM-A153/A153M Z2 Zinc coating (electrodeposited
19、) in accordance with ASTM-B633, Fe/Zn 5, type VI. (protects to 120hr in salt spray in accordance with ASTM-B117 and environmentally friendly) Z3 Zinc coating, mechanically deposited, in accordance with ASTM-B695, class 50, type II (Chromate) Z4 Zinc coating, mechanically deposited, in accordance wit
20、h ASTM-B695, class 50, type I (Plain zinc; lowest cost protection, but may be environmentally friendly) Environmental safety note: If at all possible and for a safer environment, do not use cadmium or chromate conversion. Recommend to use “Z2”, ASTM-B633, Fe/Zn 5, type VI. Threads shall be in accord
21、ance with FF-C-450. Marking shall be in accordance with FF-C-450. For design feature purposes, this specification takes precedence over acquisition documents referenced herein. In the event of a conflict between the text of this specification sheet and the references cited herein, the text of this s
22、pecification sheet shall take precedence. Part or Identifying Number (PIN), example. MS16842 Z2 -1 Specification sheet number Protective Coating Size dash number for pipe end (see table I) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS16842G 6 Fo
23、r interchangeable PINs see table I. TABLE I. Interchangeability PINs. Use Cancelled Use Cancelled Use Cancelled MS16842-1 MS16842-101 MS16842-6 MS16842-106 MS16842-11 MS16842-111 MS16842-2 MS16842-102 MS16842-7 MS16842-107 MS16842-12 MS16842-112 MS16842-3 MS16842-103 MS16842-8 MS16842-108 MS16842-13
24、 MS16842-113 MS16842-4 MS16842-104 MS16842-9 MS16842-109 MS16842-14 MS16842-114 MS16842-5 MS16842-105 MS16842-10 MS16842-110 MS16842-15 MS16842-115 Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were mad
25、e. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship t
26、o the last previous issue. Referenced documents. In addition to FF-C-450, this document references the following: ASTM-A153/A153M ASTM-B117 ASTM-B633 ASTM-B695 SAE-AMS-QQ-P-416 CONCLUDING MATERIAL Custodians: Preparing activity: Army AR DLA CC Navy SH Air Force 99 DLA-CC (Project 4030-2010-006) Revi
27、ew activities: Army AT, AV, CR4, GL Navy MC, SA, YD Air Force 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
