1、 DETAIL SPECIFICATION SHEET CONNECTOR, PLUG, ELECTRICAL, CABLE CONNECTING, FEMALE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-229
2、92. FIGURE 1. Dimensions and configuration. AMSC N/A FSC 5935 MS17345F 16 January 2013 SUPERSEDING MS17345E 26 October 2005 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17345F 2 FIGURE 1. Dimensions and configuration - Continued. Prov
3、ided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17345F 3 FIGURE 1. Dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17345F 4 Shell size A Thread (plated) class
4、 2A B + .016 - .000 D dia + .005 - .010 K + .021 - .020 12 0.8750-0.1P-0.2L-DS .688 .567 .938 14 1.0000-0.1P-0.2L-DS .692 16 1.1250-0.1P-0.2L-DS .817 18 1.2500-0.1P-0.2L-DS .703 .942 .953 20 1.3750-0.1P-0.2L-DS 1.068 22 1.5000-0.1P-0.2L-DS 1.192 24 1.7500-0.1P-0.2L-DS .766 1.016 .977 28 2.0000-0.1P-
5、0.2L-DS 1.536 1.016 32 2.2500-0.1P-0.2L-DS .703 1.786 1.078 36 2.5000-0.1P-0.2L-DS 2.005 40 2.7500-0.1P-0.2L-DS 2.255 44 3.0000-0.1P-0.2L-DS 2.545 FIGURE 1. Dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS1
6、7345F 5 Shell size Q max QQ max S + .021 - .020 U .010 V Thread (plated) class 2A LH 12 1.055 - 1.000 .500 .7500-20 UNEF 14 1.605 1.094 .547 .8750-20 UNEF 16 1.281 .641 1.0000-20 UNEF 18 1.040 1.590 1.375 .688 1.1250-18 NEF 20 1.500 .750 1.2500-18 NEF 22 1.625 .812 1.3750-18 NEF 24 1.527 1.875 1.875
7、 .938 1.6250-18 NEF 28 .977 1.527 2.125 1.062 1.8750-16 UN 32 .915 1.465 2.375 1.188 2.0625-16 N 36 2.625 1.312 2.3125-16 N 40 3.000 1.500 2.6250-16 UN 44 NA NA 3.250 1.625 2.8750-16 UN FIGURE 1. Dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking per
8、mitted without license from IHS-,-,-MS17345F 6 Shell size DD .010 EE dia + .001 - .007 GG dia YY dia + .010 - .006 AAA BBB 12 .641 .672 1.250 .647 .126 -.001, +.007 .063 -.001, +.007 14 .797 1.375 .772 16 .922 1.500 .897 .182 -.001, +.010 .108 -.001, +.010 18 .625 1.040 1.625 1.022 20 1.164 1.750 1.
9、148 22 1.289 1.875 1.272 24 1.539 2.125 1.473 .260 -.001, +.010 .155 -.001, +.010 28 1.780 2.37 1.692 32 .563 1.967 2.625 1.942 36 2.217 2.875 2.161 40 .703 2.530 3.125 2.411 44 2.780 3.500 2.692 FIGURE 1. Dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or netw
10、orking permitted without license from IHS-,-,-MS17345F 7 Shell size CCC DDD Socket insert location .030 EEE Pin insert location .030 Z max (see requirements) Z min (size 0 contacts only) 12 .0035 .020 .729 .726 NA 14 16 .007 18 .711 20 .780 22 24 .648 .717 28 32 .576 .655 36 40 44 .039 .764 .797 FIG
11、URE 1. Dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17345F 8 NOTES: 1. All dimensions are in inches. 2. Unless otherwise specified tolerances are .016 inch (0.41 mm). 3. Metric equivalents are given for
12、information only. 4. Maximum termination of grommet extension for contact sizes 12 and 16 for class J. 5. Maximum termination of grommet extension for contact sizes 0, 4 and 8 for class J. 6. For protective cover, see MS17349, type A. FIGURE 1. Dimensions and configuration - Continued. Inches mm Inc
13、hes mm Inches mm Inches mm .001 .0035 .005 .006 .007 .010 .016 .020 .021 .030 .031 .039 .062 .063 .108 .126 .141 .155 .182 .260 .500 .547 .563 .567 .576 .622 .625 .641 .647 .648 .655 .672 0.03 0.09 0.13 0.15 0.18 0.25 0.41 0.51 0.53 0.76 0.79 0.99 1.57 1.60 2.74 3.20 3.58 3.94 4.62 6.60 12.70 13.89
14、14.30 14.40 14.63 15.80 15.86 16.28 16.43 16.45 16.64 17.06 .686 .688 .692 .703 .711 .717 .726 .729 .750 .764 .766 .772 .780 .797 .812 .817 .875 .897 .915 .922 .938 .942 .953 .977 1.000 1.016 1.022 1.040 1.055 1.062 17.34 17.42 17.58 17.86 18.06 18.21 14.44 18.52 19.05 19.41 19.46 19.61 19.81 20.24
15、20.62 20.75 22.23 22.78 23.24 23.42 23.82 23.93 24.21 24.82 25.40 25.81 25.96 24.41 26.80 26.97 1.068 1.078 1.094 1.125 1.148 1.164 1.188 1.192 1.250 1.272 1.281 1.289 1.312 1.317 1.375 1.465 1.473 1.500 1.527 1.536 1.539 1.590 1.605 1.625 1.692 1.750 1.780 27.13 27.38 28.78 28.58 29.16 29.60 30.18
16、30.28 31.75 32.31 32.54 33.74 33.32 33.45 34.93 37.21 37.41 38.10 38.79 39.01 39.09 40.39 40.77 41.28 42.98 44.45 45.21 1.786 1.875 1.942 1.967 2.000 2.005 2.0625 2.125 2.161 2.217 2.250 2.255 2.3125 2.375 2.411 2.500 2.530 2.545 2.625 2.692 2.750 2.764 2.780 2.875 3.000 3.125 3.250 3.500 45.36 47.6
17、3 49.33 49.96 50.80 50.93 52.39 53.98 54.89 56.31 57.15 57.28 58.737 60.33 61.24 63.50 64.26 64.64 66.70 68.38 69.85 70.21 70.61 73.03 76.20 79.38 82.55 88.90 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17345F 9 REQUIREMENTS: Design and constru
18、ction: See figure 1. Mates with plug MS17344. Dimensions shall be maintained when inserts are pressed firmly against indicated shoulder. For size 0 contacts only: Increase Z dimension by .312 (7.92 mm) for shell sizes 12 through 40, and increase Z dimension by .062 (1.57 mm) for shell size 44. For s
19、ize, insert arrangement, alternate position, contact size, spacing and service rating, see MIL-STD-1651. Shell finish: See MIL-DTL-22992. Class shall be designated by the letter C (pressurized), J (pressurized with grommet) or R (environmental resisting). Part or Identifying Number (PIN) example: MS
20、17345 R 20 C 27 P W MS number Class Shell size Finish Insert arrangement Contact style Alternate position Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In ad
21、dition to MIL-DTL-22992, this document references the following: MS17344 MS17349 MIL-STD-1651 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17345F 10 CONCLUDING MATERIAL Custodians: Preparing activity: Army CR DLA CC Navy EC Air Force 85 DLA CC R
22、eview activities: (Project 59352012181) Army AR, MI Navy AS, CG, MC, OS, YD Air Force 19 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
