1、 DETAIL SPECIFICATION SHEET CONNECTOR, RECEPTACLE, DUMMY STOWAGE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-22992. FIGURE 1. Dim
2、ensions and configuration. AMSC N/A FSC 5935 MS18062D 12 March 2013 SUPERSEDING MS18062C 25 October 2005 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS18062D 2 FIGURE 1. Dimensions and configuration - Continued. Provided by IHSNot for
3、ResaleNo reproduction or networking permitted without license from IHS-,-,-MS18062D 3 Shell size A Thread (plated) class 2A D dia + .005 - .010 K + .021 - .010 M + .010 - .000 R (TP) 12 .8750-0.1P-0.2L-DS .567 .938 .797 .906 14 1.0000-0.1P-0.2L-DS .692 .969 16 1.1250-0.1P-0.2L-DS .817 1.062 18 1.250
4、0-0.1P-0.2L-DS .942 .953 1.156 20 1.3750-0.1P-0.2L-DS 1.068 1.250 22 1.5000-0.1P-0.2L-DS 1.192 1.375 24 1.7500-0.1P-0.2L-DS 1.317 1.047 .859 1.562 28 2.0000-0.1P-0.2L-DS 1.536 1.750 32 2.2500-0.1P-0.2L-DS 1.786 1.110 .922 1.938 36 2.5000-0.1P-0.2L-DS 2.005 2.188 40 2.7500-0.1P-0.2L-DS 2.255 2.375 Sh
5、ell size S + .021 - .020 T dia .005 YY dia + .010 - .006 AAA BBB CCC 12 1.188 .150 .647 .126 +.007 / -.001 .063 +.007 / -.001 .0035 14 1.281 .772 16 1.375 .897 .182 +.010 / -.001 .108 +.010 / -.001 .0070 18 1.500 .177 1.022 20 1.625 1.148 22 1.750 1.272 24 2.000 1.473 .260 +.010 / -.001 .155 +.010 /
6、 -.001 28 2.250 1.692 32 2.500 .209 1.942 36 2.750 2.161 40 3.000 2.411 FIGURE 1. Dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS18062D 4 Inches mm Inches mm Inches mm Inches mm .001 0.0254 .692 17.577 1.1
7、56 29.362 2.005 50.93 .0035 0.089 .772 19.609 1.188 30.175 2.161 54.89 .005 0.127 .797 20.244 1.192 30.277 2.188 55.575 .006 0.152 .817 20.752 1.250 31.75 2.250 57.15 .0070 0.178 .859 21.819 1.272 32.309 2.255 57.277 .010 0.254 .8750 22.225 1.281 32.537 2.375 60.325 .016 0.406 .897 22.784 1.317 33.4
8、52 2.411 61.239 .020 0.508 .906 23.012 1.375 34.925 2.500 63.50 .021 0.533 .922 23.419 1.473 37.414 2.750 69.85 .031 0.787 .938 23.825 1.500 38.10 3.000 76.20 .062 1.575 .942 23.927 1.536 39.014 .063 1.600 .953 24.206 1.562 39.675 .108 2.743 .969 24.613 1.625 41.275 .126 3.200 1.0000 25.4 1.692 42.9
9、77 .150 3.81 1.022 25.959 1.750 44.45 .155 3.94 1.047 26.594 1.786 45.364 .177 4.496 1.062 26.975 1.938 49.225 .182 4.623 1.068 27.127 1.942 49.327 .209 5.31 1.110 28.194 2.000 50.80 .260 6.604 1.1250 28.575 .567 14.402 1.148 29.159 .647 16.434 .672 17.069 NOTES: 1. All dimensions are in inches. Met
10、ric equivalents are given for information only. 2. Unless otherwise specified, tolerances are .016 inch (0.41 mm). FIGURE 1. Dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS18062D 5 REQUIREMENTS: Design and
11、 construction: See figure 1. This dummy receptacle mates with plugs shown on MS17344. Shell finish: See MIL-DTL-22922. Part or Identifying Number (PIN) example: MS18062 N 28 MS number Finish Shell size Changes from previous issue. Marginal notations are not used in this revision to identify changes
12、with respect to the previous issue, due to the extent of the changes. Referenced documents. In addition to MIL-DTL-22992, this document references the following: MS17344 CONCLUDING MATERIAL Custodians: Preparing activity: Army CR DLA CC Navy EC Air Force 85 DLA CC Review activities: (Project 5935201
13、2-187) Army AV, MI Navy AS, CG, MC, OS, SH Air Force 19 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change. you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
