1、 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, WALL MOUNT, SOLDER TYPE, BAYONET COUPLING, CLASS T, SERIES 1 This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist
2、of this specification sheet and MIL-DTL-27599. FIGURE 1. Receptacle, wall mount. AMSC N/A FSC 5935 INCH - POUNDMS20026F 31 August 2010 SUPERSEDING MS20026E 20 May 2005 Inactive for new design after 7 December 1998. Provided by IHSNot for ResaleNo reproduction or networking permitted without license
3、from IHS-,-,-MS20026F 2 FIGURE 1. Receptacle, wall mount - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20026F 3 FIGURE 1. Receptacle, wall mount - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted withou
4、t license from IHS-,-,-MS20026F 4 NOTES: 1. Normal keyway position. For other keyway positions, see MIL-DTL-27599. 2. Insert front surface shall be flat within .005 total indicator reading. 3. Diameters A & D shall be concentric within .015 T.I.R. 4. Diameters D & J shall be concentric within .005 T
5、I.R. at MMC. 5. Diameter A with respect to diameter B, and diameter D with respect to diameter N, shall be concentric at MMC. 6. Dimensions are in inches. Metric equivalents are given for information only. 7. The point at which a gauge pin having the same basic diameter as the mating contact and a
6、square face, touches socket contact spring. 8. The gauge features for GG shall be CC smaller than their MMC size at basic location. FIGURE 1. Receptacle, wall mount - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20026F 5 Inches mm Inc
7、hes mm Inches mm Inches mm .001 .0254 .012 .305 .063 1.60 .39 9.91 .004 .1016 .015 .38 .116 2.95 .453 11.50 .005 .127 .02 .51 .126 3.20 .565 14.35 .01 .254 .036 .914 .156 3.96 .011 .280 .062 1.57 FIGURE 1. Receptacle, wall mount - Continued. TABLE I. Dimensions. 1/ 2/ Shell size A dia + .001 - .005
8、B dia + .000 - .016 D dia + .005 - .001 I dia .005 J .005 pin insert JI .005 socket insert 9 .572 (14.53) .662 (16.81) .442 (11.23) .296 (7.52) .576 (14.63) .020 (.51) 11 .700 (17.78) .810 (20.57) .570 (14.48) .413 (10.49) 13 .850 (21.60) .960 (24.38) .687 (17.45) .527 (13.38) 15 .975 (24.76) 1.085
9、27.56) .812 (20.62) .652 (16.56) 17 1.100 (27.94) 1.210 (30.73) .937 (23.80) .777 (19.73) 19 1.207 (30.66) 1.317 (33.45) 1.042 (26.46) .866 (22.00) 21 1.332 (33.83) 1.442 (36.63) 1.167 (29.64) .991 (25.17) 23 1.457 (37.00) 1.567 (39.80) 1.292 (32.82) 1.116 (28.34) 25 1.582 (40.20) 1.692 (42.97) 1.4
10、17 (36.00) 1.241 (31.52) See notes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20026F 6 TABLE I. Dimensions - Continued. 1/ 2/ Shell size K + .015 - .000 L max M + .000 - .005 N dia + .005 - .006 P dia + .010 - .005 R BSC 9 .08
11、5 (2.16) 1.094 (27.78) .632 (16.05) .492 (12.49) .128 (3.25) .3595 (9.1313) 11 .620 (15.75) .406 10.31) 13 .769 (19.53) .453 (11.50) 15 .894 (22.70) .4845 (12.30) 17 1.019 (25.88) .531 (13.48) 19 1.124 (28.55) .578 (14.68) 21 .115 (2.92) .602 (15.30) 1.249 (31.72) .625 (15.87) 23 1.374 (34.90) .147
12、3.73) .6875 (17.46) 25 1.499 (38.07) .750 (19.05) See notes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20026F 7 TABLE I. Dimensions Continued. 1/ 2/ Shell size S .020 T dia + .006 - .002 W min full thread Z BSC V thread class
13、 2A plated UNEF CC 9 .938 (23.82) .078 (1.98) .250 (6.35) .100 (2.54) 7/16 - 28 .010 (.254) 11 1.031 (26.18) 9/16 - 24 13 1.125 (28.57) 11/16 - 24 15 1.219 (30.96) 13/16 - 20 17 1.312 (33.32) 15/16 - 20 19 1.438 (36.52) 1 1/16 - 18 21 1.562 (39.67) 1 3/16 - 18 23 1.688 (42.87) 1 5/16 - 18 25 1.812 (
14、46.02) .125 (3.175) .109 (2.76) 1 7/16 - 18 1/ Dimensions are in inches. 2/ Metric equivalents are given for information only. REQUIREMENTS Dimensions and configurations: See figure 1 and table I. This connector mates with MS20027 and MS20028. Insert arrangement shall be in accordance with MIL-STD-1
15、560. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20026F 8 Part or Identifying Number (PIN) example: MS20026 T 15 A 18 P A MS number Class Shell size Finish (color) Insert arrangement Style Polarizing position (No letter is required for normal p
16、osition) Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-27599, this document references the following: MIL-STD-1560 MS20027 MS20028 CON
17、CLUDING MATERIAL Custodians: Preparing activity: Air Force - 85 DLA - CC DLA - CC Review activities: Air Force - 99 (Project 5935-2010-096) DLA - IS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
