1、 DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, SOLDER TYPE, BAYONET COUPLING, CLASS T, SERIES I This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this
2、specification sheet and MIL-DTL-27599. FIGURE 1. Plug. AMSC N/A FSC 5935 INCH - POUNDMS20028G 31 August 2010 SUPERSEDING MS20028F 20 May 2005 Inactive for new design after 7 December 1998.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20028G 2 Pro
3、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20028G 3 NOTES: 1. The point at which a gauge pin having the same basic diameter as the mating contact and a square face, touches socket contact spring. 2. Insert front surface shall be flat within .005
4、T.I.R. 3. Diameter D with respect to diameter S shall be concentric at MMC. 4. Diameters A and N shall be concentric within .008 T.I.R. 5. Dimensions are in inches. Metric equivalents are given for information only. 6. Normal keyway position. For other keyway positions, see MIL-DTL-27599. 7. Finish:
5、 A - Bright cadmium (see MIL-DTL-27599). B - Olive drab (see MIL-DTL-27599). F - Electroless nickel in accordance with SAE-AMS-C-26074, class 3 or 4, grade B, finish dull. T - Nickel flurocarbon (see MIL-DTL-27599). Z - Zinc nickel (see MIL-DTL-27599). FIGURE 1. Plug - Continued. Provided by IHSNot
6、for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20028G 4 Inches mm Inches mm Inches mm Inches mm 0.001 0.0254 0.011 0.280 0.06 1.524 0.347 8.814 0.002 0.051 0.012 0.305 0.062 1.575 0.375 9.525 0.003 0.076 0.016 0.406 0.100 2.54 0.478 12.14 0.004 0.102 0.034 0.864 0.1
7、72 4.370 0.578 14.68 0.005 0.127 0.047 1.194 0.188 4.775 0.594 15.09 0.010 0.254 0.052 1.321 0.204 5.182 FIGURE 1. Plug - Continued. TABLE I. Dimensions. 1/ 2/ Shell size A dia + .005 - .001 B .020 C dia + .005 - .001 D dia + .001 - .005 DIdia min E dia .003 F dia min 9 .580 (14.73) .113 (2.87) .684
8、 (17.37) .437 (11.10) .417 (10.60) .315 (8.00) .447 (11.35) 11 .712 (18.08) .832 (21.13) .565 (14.35) .545 (13.84) .433 (11.00) .575 (14.60) 13 .861 (21.87) .981 (24.92) .677 (17.20) .657 (16.68) .547 (13.90) .692 (17.57) 15 .985 (25.02) 1.106 (28.09) .802 (20.37) .782 (19.86) .672 (17.07) .817 (20.
9、75) 17 1.110 (28.20) 1.230 (31.24) .927 (23.54) .907 (23.04) .797 (20.24) .942 (23.92) 19 1.217 (30.91) 1.347 (34.21) 1.032 (26.21) 1.012 (25.70) .886 (22.50) 1.047 (26.60) 21 1.342 (34.08) 1.462 (37.13) 1.157 (29.38) 1.137 (28.88) 1.011 (25.68) 1.172 (29.76) 23 1.467 (37.26) 1.587 (40.31) 1.282 (32
10、56) 1.262 (32.05) 1.136 (28.85) 1.297 (32.94) 25 1.592 (40.44) .152 (3.86) 1.712 (43.48) 1.407 (35.73) 1.387 (35.22) 1.260 (32.00) 1.442 (36.62) See notes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20028G 5 TABLE I. Dimension
11、s - Continued. 1/ 2/ Shell size J .005 socket insert JI .005 pin insert L max N dia + .005 - .006 Q dia max S dia + .001 - .010 9 .576 (14.63) .018 (.457) .547 (13.90) .674 (17.12) .859 (21.82) .482 (12.24) 11 .822 (20.87) .984 (25.00) .610 (15.49) 13 .972 (24.68) 1.156 (29.36) .759 (19.27) 15 1.097
12、 (27.86) 1.281 (32.53) .884 (22.45) 17 1.222 (31.03) 1.406 (35.71) 1.009 (25.63) 19 1.329 (33.75) 1.516 (38.50) 1.114 (28.30) 21 1.454 (36.93) 1.641 (41.68) 1.239 (31.47) 23 1.579 (40.10) 1.766 (44.85) 1.364 (34.64) 25 .609 (15.47) 1.704 (43.28) 1.891 (48.03) 1.489 (37.82) See notes at end of table.
13、 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20028G 6 TABLE I. Dimensions Continued. 1/ 2/ Shell size W + .016 - .006 X + .016 - .001 R thread class 2A plated UNEF AA + .005 - .006 9 .693 (17.60) .090 (2.29) 7/16 - 28 .068 (1.73) 11 .682 (17.32
14、) 9/16 - 24 13 11/16 - 24 15 .693 (17.60) 13/16 - 20 17 15/16 - 20 19 1 1/16 - 18 21 1 3/16 - 18 23 1 5/16 - 18 25 .794 (20.16) .137 (3.47) 1 7/16 - 18 .047 (1.20) 1/ Dimension are in inches. 2/ Metric equivalents are given for information only. REQUIREMENTS: Dimensions and configurations: See figur
15、e 1 and table I. This connector mates with MS20026 and MS20029. Insert arrangement shall be in accordance with MIL-STD-1560. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20028G 7 Part or Identifying Number (PIN) example: MS20028 T 25 A 29 P A MS
16、 number Class Shell size Finish (Plating material) Insert arrangement Style Polarizing position (No letter is required for normal position) Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the ch
17、anges. Referenced documents. In addition to MIL-DTL-27599, this document references the following: MIL-STD-1560 MS20026 MS20029 SAE-AMS-C-26074 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20028G 8 CONCLUDING MATERIAL Custodians: Preparing activ
18、ity: Air Force - 85 DLA - CC DLA - CC Review activities: Air Force - 99 (Project 5935-2010-097) DLA IS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
