1、 MS20115B 26 July 2012 SUPERSEDING MS20115A 17 November 1972 DETAIL SPECIFICATION SHEET SHACKLE - WIRE ROPE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specifica
2、tion sheet and MIL-DTL-5675. FIGURE 1. Shackle dimensions and configurations. AMSC N/A FSC 4030 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20115B 2 Size designator Nominal wire rope dia. ref Minimum breaking strength lb (kg) A dia.
3、+.016 (0.41) -.000 inch (mm) D dia +.005 (0.13) -.000 inch (mm) E rad inch (mm) F +.010 (0.25) -.005 (0.13) inch (mm) 2 1/16 480 (218) .188 (4.78) .190 (4.83) .172 (4.37) .218 (5.54) 3 3/32 920 (417) .219 (5.56) .219 (5.56) .254 (6.45) 4 1/8 2000 (907) .250 (6.35) .274 (6.96) .383 (9.73) 5 5/32 2800
4、 (1270) .281 (7.14) .250 (6.35) .344 (8.74) .406 (10.31) 6 3/16 4200 (1905) .375 (9.53) .313 (7.95) .391 (9.93) .543 (13.79) 7 7/32 5600 (2540) .406 (10.31) .453 (11.51) .625 (15.88) 8 1/4 7000 (3175) .438 (11.13) .375 (9.53) .484 (12.29) .688 (17.48) 9 9/32 8000 (3629) .500 (12.70) .438 (11.13) .57
5、8 (14.68 .719 (18.26) 10 5/16 9800 (4445) .594 (15.09) .633 (16.08) .765 (19.43) 12 3/8 14000 (6350) .625 (15.88) .500 (12.70) .750 (19.05) .830 (21.08) Size designator G +.007 (0.18) -.003 (0.08) inch (mm) H .016 (0.41) inch (mm) J .016 (0.41) inch (mm) K .016 (0.41) inch (mm) L inch (mm) 2 .093 (2
6、.36) .156 (3.96) .156 (3.96) .156 (3.96) .031 (0.79) 3 .108 (2.74) 4 .195 (4.95) .250 (6.35) .250 (6.35) .219 (5.56) 5 .202 (5.13) 6 .260 (6.60) .312 (7.92) .312 (7.92) .281 (7.14) .062 (1.58) 7 .296 (7.52) .344 (8.74) .344 (8.74) .312 (7.92) 8 .313 (7.95) .406 (10.31) .359 (9.12) .359 (9.12) 9 .327
7、 (8.31) .438 (11.13) .391 (9.93) .391 (9.93) 10 .348 (8.84) .469 (11.91) .422 (10.72) .422 (11.23) .094 (2.39) 12 .380 (9.65) .562 (14.27) .500 (12.70) .500 (12.70) .125 (3.18) Size designator N .016 (0.41) inch (mm) P rad. .016 (0.41) inch (mm) 2 .562 (14.27) .375 (9.53) 3 4 5 .750 (19.05) .438 (11
8、.13) 6 .812 (20.62) .500 (12.70) 7 .875 (22.23) 8 1.000 (25.40) .406 (10.31) 9 10 1.125 (28.58) .500 (12.70) 12 1.250 (31.75) FIGURE 1. Shackle dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20115B 3 NOTE
9、S: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Break sharp edges, and remove all hanging burrs and slivers. 4. Unless otherwise specified tolerances: decimals .010 (0.25 mm). 5. Holes to be co-axial within .005 (0.13 mm). FIGURE 1. Shackle dimensions and con
10、figurations - Continued. REQUIREMENTS: Dimensions and configuration shall be in accordance with figure 1. For design features purposes, this standard takes precedence over documents referenced herein. Referenced documents shall be of the issue in effect on date of invitation for bid. Materials and f
11、inishes shall be in accordance with MIL-DTL-5675, see table I for material code. TABLE I. Material and code letters. Code letter Material - Corrosion resistant steel (CRES) F Steel K Nickel-copper-aluminum alloy PIN: The PIN consists of prefix “MS” the specification sheet number, a letter or dash nu
12、mber for material code, and size number. Unassigned PINs shall not be used. MS 20115 - 8 PIN example: MS20115-8 indicates a CRES shackle for 1/4 inch (6.35 mm) wire rope. Marking: Part shall be permanently marked with the MS PIN, and include the manufacturers CAGE, name, or trademark. Changes from p
13、revious issues. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. This document references MIL-DTL-5675. Size designator (see figure 1) Specification sheet number MS prefix Material code let
14、ter (see table I) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20115B 4 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AV DLA - CC Navy - AS Air Force - 99 (Project 4030-2012-011) DLA - CC Review activities: Army - MI Navy - MC, SA A
15、ir Force - 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
