1、AMS N/C 1 of 6 FSC 5320DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.MS21141J25 March 1998SupersedingMS21141H31 March 1994MILITARY SPECIFICATION SHEETFASTENER, BLIND, HIGH STRENGTH, PULL TYPE, POSITIVE MECHANICALLOCK, PROTRUDING HEAD, CORROSION RESISTING STEEL, 95
2、KSI FsuThis specification is approved for use by all Departments and Agencies of theDepartment of Defense.The requirements for acquiring the product described herein shall consist of this specification sheet and theissue of the following specification listed in that issue of the Department of Defens
3、e Index of Specifications andStandards (DoDISS) specified in the solicitation: MIL-F-8975.J Denotes change(s)INCH-POUNDProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS21141J2JJJJTABLE I. Fastener Dimensions and Strengths.Size Dash Number(b)Nom A B
4、D F K P R X Installed FastenerDoubleActionSingleActionSize Rad (a) MinUltimateSingleMinUltimateTensileHoleLimits(Ref)(c) (c) (d) Min Max Min Max Max Min Shear(Lbs.)(Lbs.)- S04 - .1250 .215.197.060.054.129.127.812 .150 .095 .190 .010 .170 1222 675 .132.129-05 S05 U05 .1562 .272.250.070.058.164.162.84
5、4 .202 .120 .215 .010 .195 1980 1150 .167.164-06 S06 U06 .1875 .332.305.135.120.199.197.875 .231 .146 .250 .015 .238 2925 1690 .202.199- -08 U08 .2500 .432.400.140.120.260.2581.000 .279 .188 .305 .020 .315 5000 2900 .263.260- -10 U10 .3125 .522.480.141.131.312.3101.218 .319 .224 .350 .025 .373 7200
6、4170 .315.312- -12 U12 .3750 .627.580.205.195.374.3721.562 .364 .264 .405 .030 .448 10380 5970 .377.374(a) Maximum diameter of blind head (X) shall not exceed maximum diameter of manufactured head (A).(b) Sizes “05” and “06” with “-“ are installed with a double action tool. All other sizes are insta
7、lled with a singleaction tool. Sizes “U05 and “U06” may be installed with a double or single action tool. See Amendment 3 ofMIL-F-8975 for tool selection.(c) -05, -06, S05, S06, -08, -10, and -12 are inactive for new design after 1 January 91. Use U05, U06, S05 andS06.(d) Letter “U” signifies single
8、 action fastener without frangible type of locking collar or locking collar cap. “U”and “S” code fasteners in sizes “05” and “06” are color identified green on locking collar, shifting washer, orserrated pin. “S” code fasteners may be supplied with a locking collar cap.(e) Single digit marking is pe
9、rmissible for grip dash numbers less than 10.(f) Diameter of serrated pin shall not exceed “D” maximum and may be .002 below “D” minimum, in area “P”only(g) Not required on -04 diameter parts.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS21141J3J
10、Table II. Grip Tabulations.1250 (-04) .1562 (-05) .1875 (-06)GripDash No. Grip Range C LGripDashNo.Grip Range C LGripDashNo.Grip Range C LMin Max Max Min. Max. Max. Min. Max. Max.-0401-0402-0403-0404-0405-0406-0407-0408.031.094.156.219.281.344.406.469.096.157.220.282.345.407.470.532.299.361.423.486.
11、548.611.673.736.191.254.316.379.441.504.566.629-0501-0502-0503-0504-0505-0506-0507-0508.031.094.156.219.281.344.406.469.096.157.220.282.345.407.470.532.372.434.496.559.622.684.746.809.217.280.342.405.467.530.592.655-0602-0603-0604-0605-0606-0607-0608.120.156.219.281.344.406.469.157.220.282.345.407.4
12、70.532.505.541.604.666.729.791.854.303.365.428.490.553.615.678-0409 .531 .595 .798 .691 -0509-0510-0511-0512-0513-0514-0515-0516.531.594.656.719.781.844.906.969.595.657.720.782.845.907.9701.032.872.934.9961.0591.1221.1841.2461.309.717.780.842.905.6971.0301.0921.155-0609-0610-0611-0612-0613-0614-0615
13、-0616.531.594.656.719.781.844.906.969.595.657.720.782.845.907.9701.032.916.9791.0411.1041.1661.2291.2911.354.740.803.865.928.9901.0531.1151.178-061-0618-0619-06201.0311.0941.1561.2191.0951.1571.2201.2821.4161.4791.5411.6041.2401.3031.3651.428-0621-0622-0623-06241.2811.3441.4061.4691.3451.4071.4701.5
14、321.6661.7291.7911.8541.4901.5531.6151.678-0625-06261.5311.5941.5951.6571.9161.9791.7401.803JProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS21141J4Table II. Grip Tabulations.(Continued).2500 (-08) .3125 (-10) .3750 (-12)GripDash No. Grip Range C L
15、GripDash No. Grip Range C LGripDashNo.Grip Range C LMin. Max. Max. Min. Max. Max. Min. Max. Max.-0802-0803-0804-0805-0806-0807-0808.094.156.219.281.344.406.469.157.220.282.345.407.470.532.553.616.678.740.803.866.928.344.406.469.531.594.656.719-1002-1003-1004-1005-1006-1007-1008.094.156.219.281.344.4
16、06.469.157.220.282.345.407.470.532.618.680.743.805.868.930.993.381.443.506.568.631.693.756-1202-1203-1204-1205-1206-1207-1208.094.156.219.281.344.406.469.157.220.282.345.407.470.532.695.757.820.883.9451.0071.070.423.485.548.610.673.735.798-0809-0810-0811-0812-0813-0814-0815-0816.531.594.656.719.781.
17、844.906.969.595.657.720.782.845.907.9701.032.9901.0531.1161.1781.2401.3031.3661.428.781.844.906.9691.0311.0941.1561.219-1009-1010-1011-1012-1013-1014-1015-1016.531.594.656.719.781.844.906.969.595.657.720.782.845.907.9701.0321.0551.1181.1801.2431.3051.3681.4301.493.818.881.9431.0061.0681.1311.1931.25
18、6-1209-1210-1211-1212-1213-1214-1215-1216.531.594.656.719.781.844.906.969.595.657.720.782.845.907.9701.0321.1331.1951.2571.3201.3831.4451.5071.570.860.923.9851.0481.1101.1731.2351.298-8017-0818-0819-08201.0311.0941.1561.2191.0951.1571.2201.2821.4901.5531.6161.6781.2811.3441.4061.469-1017-1018-1019-1
19、0201.0311.0941.1561.2191.0951.1571.2201.2821.5551.6181.6801.7431.3181.3811.4431.506-1217-1218-1219-12201.0311.0941.1561.2191.0951.1571.2201.2821.6331.6951.7571.8201.3601.4231.4851.548-0821-0822-0823-08241.2811.3441.4061.4691.3451.4071.4701.5321.7401.8031.8661.9281.5311.5941.6561.719-1021-1022-1023-1
20、0241.2811.3441.4061.4691.3451.4071.4701.5321.8051.8681.9301.9931.6581.6311.6931.756-1221-1222-1223-12241.2811.3441.4061.4691.3451.4071.4701.5321.8831.9452.0072.0701.6101.6731.7351.798-0825-08261.5311.5941.5951.6571.9902.05317811.844-1025-10261.5311.5941.5951.6572.0552.1181.8181.881-1225-12261.5311.5
21、941.5951.6572.1332.1951.8601.923-1027-10281.6561.7191.7201.7822.1802.2431.9432.006-1227-12281.6561.7191.7201.7822.2572.3201.9852.048-1229-1230-1231-12321.7811.8441.9061.9691.8451.9071.9702.0322.3832.4452.5072.5702.1102.1732.2352.298Provided by IHSNot for ResaleNo reproduction or networking permitted
22、 without license from IHS-,-,-MS21141J5JJJRequirements:1. Material:Sleeve: Corrosion resistant steel per chemical requirements of AMS5737 (A286).Serrated Pin: Corrosion resistant steel per chemical requirements of AMS5737 (A286).Mechanical Lock: Corrosion resistant steel per chemical requirements of
23、 AMS5737 or 316CRES conforming to the chemical requirements of AMS5690. Optional touse INCO 600 per AMS 5687 (no finish requirement) on 04 dia. lockcollars only2. Protective coating:Sleeve: Passivation per QQ-P-35, or cadmium plated per QQ-P-416, Type II, (cleardichromate), Class 2.Serrated Pin: Pas
24、sivation per QQ-P-35.Mechanical Lock: Passivation per QQ-P-35.3. Lubrication: When lubricated, parts shall be lubricated per AS 5272, MIL-L-87132 or DOD-L-85645.4. Hole preparation: See MS33522 except for hole size shown in MIL-F-8975.5. Example of part number: (For inactive code see sheet 1, footno
25、te (c).)6. MS21141 - 08 03 P = .2500 nom. Size. .156 min. grip, cadmium plated, installed with a single actiontool.“P” denotes cadmium plating.“L” denotes longer pintail.“W” denotes fastener contains drive washer for blunt nosed tool installation.No code denotes passivation treatment.Grip range (see
26、 table II).See dash number (see Table I).“-“ denotes fasteners installed with a double action tool for sizes 05 and 06.“-“ denotes fasteners installed with a single action tool for sizes 08, 10, and 12.“S” denotes fasteners installed with a single action tool for sizes 04, 05, and 06.“U” denotes sin
27、gle action tool fasteners installed with a single action tool for allsizes. (See sheet 1, footnote (d).MS numberNOTES:1. Dimensions in inches: Dimensions apply before lubrication.2. In the event of a conflict between the text of this document and the references cited herein, the text of this documen
28、tshall take precedence.3. Unless otherwise specified, issues of referenced documents are those in effect at the time of solicitation.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS21141J6Military Interests:Custodians: Preparing activity:Army - AV DLA - ISNavy - ASAir Force - 99 (Project 5320-0906)REVIEW:Army - MIAir Force - 82,Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
