1、 AMSC N/A FSC 5340 DETAIL SPECIFICATION SHEET HANDWHEEL REVOLVING HANDLE WITH KEYWAY This specification sheet is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and pr
2、ocurement specification MIL-H-9859 (Inactive for new design). ACRNEBGHDFSTYPE ISTRAIGHTTYPE IIOFFSETCNBGHDFSFIGURE 1. Handwheel. MS21312B 5 August 2008 SUPERSEDING MS21312A 29 August 1968 INCH-POUNDInactive for new design after 31 JULY 1997 Provided by IHSNot for ResaleNo reproduction or networking
3、permitted without license from IHS-,-,-MS21312B 2 TABLE I. Dash numbers and dimensions A B C D E F G H N R S Dash No. Type NOM TOL .016 .031 .03 +.002 -.000 .016 .062 NOM .03 +.0020-.0000 +.0050-.0000 1 II 4.00 .03 1.500 .750 1.00 .375 1.000 1.562 2.062 .88 .0635 .0372 2 I 6.00 1.312 .875 1.50 .500
4、1.250 2.438 3.031 1.12 .0948 .0529 3 II 6.00 .06 2.000 .875 1.50 .500 1.250 2.438 3.031 1.12 .0948 .0529 4 I 8.00 1.562 1.000 1.75 .625 1.500 3.375 3.281 1.19 .1260 .0685 5 II 8.00 2.375 1.000 1.75 .625 1.500 3.375 3.281 1.19 .1260 .0685 6 I 10.00 2.062 1.125 2.25 .625 2.000 4.312 3.281 1.19 .1260 .
5、0685 7 II 10.00 .09 3.000 1.125 2.25 .625 2.125 4.312 3.281 1.19 .1260 .0685 8 I 12.00 2.312 1.125 2.50 .750 2.250 5.312 4.188 1.38 .1260 .0685 9 II 12.00 3.250 1.125 2.50 .750 2.250 5.312 4.188 1.38 .1260 .0685 10 II 15.00 .12 2.750 1.250 1.88 1.000 1.500 6.689 4.188 1.38 .1885 .0997 NOTES 1. MATER
6、IAL: Body - Aluminum alloy in accordance with procurement specification, MIL-H-9859. Handle Aluminum alloy sleeve and steel stem in accordance with procurement specification, MIL-H-9859. 2. PROTECTIVE COATING: Aluminum alloy Anodize in accordance with procurement specification, MIL-H-9859. Steel Cad
7、mium plate in accordance with procurement specification, MIL-H-9859. Follow with coating of plastisol in accordance with procurement specification, MIL-H-9859. 3. KEYWAY: R and S dimensions conform to NASM35756 for Woodruff Keys. 4. DIMENSIONS: All dimensions are in inches unless otherwise specified
8、 Dimensions are before coating 5. PART NUMBER: The MS part number consists of the MS number plus the dash number. Example: MS21312-1. 6. For design purposes, this standard takes precedence over procurement documents referenced herein. 7. CHANGES FROM PREVIOUS ISSUE. Marginal notations are not used
9、in this revision to identify changes with respect to the previous issue due to the extent of changes. Custodians: Preparing activity: Army - AR DLA IS Navy - OS Air Force - 99 (Project 5340-2008-005) Review activities: Army AT, CR4, MI Navy MC NOTE: The activities listed above were interested in thi
10、s document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
