1、 INCH-POUNDMS23747F 1 April 2009 SUPERSEDING MS23747E 3 January 2003 DETAIL SPECIFICATION SHEET GLAND, CABLE SEALING, CLASS L This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist
2、 of this specification sheet and MIL-DTL-22992. FIGURE 1. Configuration and dimensions. AMSC N/A FSC 5935 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS23747F 2MS Part or Identifying Number (PIN) Arrangement Number A dia + .000 - .020 B dia + .02
3、0 - .000 C Min Cable diameter Ref. MS23747-1 28-03,-05,-06 32-02,-04 1.805 .969 1.034 .844 -2 28-13, 32-03 32-05,32-12 1.805 1.130 1.034 1.005 -3 32-07 1.805 1.260 1.034 1.135 -4 28-02,28-04 1.805 .844 1.034 .719 -5 44-02,44-04 2.242 1.312 1.160 1.187 -6 44-06 2.242 1.375 1.160 1.250 -7 52-02 2.927
4、1.703 1.284 1.558 -8 52-06 2.927 1.797 1.284 1.652 -9 Cancelled use MS23747-18 -10 Cancelled no superseding numbers -11 Cancelled no superseding numbers -12 28-07, 28-12 32-06 1.805 1.047 1.034 .922 -13 32-13 1.805 1.342 1.034 1.217 -14 44-03, 44-05 2.242 1.438 1.160 1.313 -15 44-12 2.242 1.516 1.16
5、0 1.391 -16 44-13 2.242 1.672 1.160 1.547 -17 48-13 2.680 2.000 1.222 1.855 -18 52-12 2.927 2.328 1.284 2.183 -19 52-13 2.927 2.453 1.284 2.308 -20 44-51 2.242 1.734 1.160 1.609 -21 44-52 2.242 1.562 1.160 1.437 -22 44-56 2.242 1.150 1.160 1.025 FIGURE 1. Configuration and dimensions Continued. Prov
6、ided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS23747F 3Inches mm Inches mm .020 .51 1.391 35.33 .719 18.26 1.437 36.50 .844 21.44 1.438 36.53 .922 23.42 1.516 38.51 .969 24.61 1.547 39.29 1.005 25.53 1.558 39.57 1.025 26.04 1.562 39.67 1.034 26.26 1.6
7、09 40.87 1.047 26.59 1.652 41.96 1.130 28.70 1.672 42.47 1.135 28.83 1.703 43.26 1.150 29.21 1.734 44.04 1.160 29.46 1.797 45.64 1.187 30.15 1.805 45.85 1.217 30.91 1.855 47.12 1.222 31.04 2.000 50.80 1.250 31.75 2.183 55.45 1.260 32.00 2.242 56.95 1.284 32.61 2.308 58.62 1.312 33.32 2.328 59.13 1.3
8、13 33.35 2.453 62.31 1.342 34.09 2.680 68.07 1.375 34.92 2.927 74.35 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only and are based upon 1.00 inch = 25.4 mm. 3. Unless otherwise specified, tolerance is 010. 4. Material is synthetic rubber in accordance
9、 with ASTM D2000. FIGURE 1. Configuration and dimensions Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS23747F 4Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previo
10、us issue due to the extent of the changes. Reference documents. In addition to MIL-DTL-22992, this document references ASTM D2000. CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - EC Air Force - 85 DLA - CC Review activities: Army MI (Project 5935-2008-156) Navy AS, CG,
11、MC, OS, YD Air Force 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
