1、AMSC N/A FSC 5930 INCH POUND MS24417K w/Amendment 1 5 July 2006 SUPERSEDING MS24417K 30 August 2005 DETAIL SPECIFICATION SHEET Guard, Switch, 2 or 3 Position This specification is approved for use by all Departments and Agencies of the Department of Defense. The complete requirements for acquiring t
2、he switch described herein shall consist of this specification and the latest issue of MIL-DTL-7703. FIGURE 1. Dimensions and configuration INACTIVE FOR NEW DESIGN AFTER 30 AUGUST 2005 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS24417K w/Amendm
3、ent 1 2Inches mm Inches mm .005 0.13 .328 8.33 .008 0.20 .475 12.06 .016 0.41 .500 12.70 .031 0.49 .656 16.66 .032 0.81 .850 21.59 .062 1.57 .875 22.22 .125 3.18 .900 22.86 .156 3.96 1.700 43.18 .188 4.77 1.800 45.72 NOTE: 1. Dimensions are in inches. 2. Metric equivalents are given for general info
4、rmation only. 3. Unless otherwise specifies, tolerances are .016 on decimals. 4. This standard takes precedence over documents referenced herein. 5. Material: Steel, commercial, .032 .008, shall be smooth and free from burrs. 6. Finish : Zinc plate, ASTM B 633, type III, or cadmium plate, SAE-AMS-QQ
5、P-416, type III, with optional supplementary treatment per MIL-C-8514 or DOD-P-15328, black enamel, lusterless, color number 37038 or semi gloss, color number 27038, FED-STD- 595 or equivalent. 7. Reference documents shall be of the issue in effect on date of invitation for bid. FIGURE 1. Dimension
6、s and configuration Continued Referenced documents MIL-DTL-7703 MIL-C-8514 FED-STD-595/27038 FED-STD-595/37038 ASTM B 633 SAE-AMS QQ-P-416 DOD-P-15328 The margins of this specification are marked with vertical lines to indicate where modifications from this amendment were made. This was done as a co
7、nvenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations. Custodians: Preparing activity Army CR DL
8、A -CC Navy AS (Project 5930-2005-076) Air Force 11 DLA CC Review activities: Air Force 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
