1、 AMSC N/A FSC 6685 INCH-POUND MS24478C 9 November 2006 SUPERSEDING MS24478B 29 January 1969 DETAIL SPECIFICATION SHEET GAGE, SINGLE 1 INCH DIAL, PNEUMATIC PRESSURE This specification sheet is approved for use by all departments and agencies of the Department of Defense. The requirements for acquirin
2、g the product described herein shall consist of this specification sheet, MIL-DTL-25867, “Gage, Pressure, Dial Indicating, Pneumatic“, and figure 1. VENTLOCATION OPTIONAL0.688 0.005 SQ.WRENCH FLATSCONNECTION END INACCORDANCE WITHAND100507/16-20 UNF-3B THDS0.109 (REF)0.375MIN. LENGTH OFWRENCH FLATS1.
3、297 DIA. (REF)1.219 DIA.1.0 DIA. MIN.RING OPENINGNAMEPLATELOCATION0.781 0.0100.7500.766NOTE: Dimensions in inches. Unless otherwise specified, tolerances in decimals 0.016. FIGURE 1. Dimensions and tolerances. Reactivated after 9 November 06 and may be used for new and existing designs and acquisiti
4、ons.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS24478C 2 NOTES: 1. Part or identification number (PIN). The PIN to be used for pressure gages acquired to this specification is created as follows: CHANGES FROM PREVIOUS ISSUE: Marginal notations
5、are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing Activity: Army - MI Air Force - 99 Review Activity: Air Force - 71 DLA - GS1 (Project 6685-2006-001) NOTE: The activities listed above were interested in this
6、document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST database at http:/assist.daps.dla.mil. MS 24478 - X Type 1 = Type I - 0 to 2000 psi Type 2 = Type II - 0 to 4000 psi Specification sheet number MS Prefix Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
