1、 MS24587E INCH-POUND14 May 2007 SUPERSEDING MS24587D 22 September 2000 DETAIL SPECIFICATION SHEET ADAPTER ASSEMBLY, STRAIGHT, HOSE TO TUBE, REUSABLE, HYDRAULIC, FUEL AND OIL LINES This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements fo
2、r acquiring the product described herein shall consist of this specification sheet and MIL-DTL-5070. FIGURE 1. Straight adapter dimensions and configuration. AMSC N/A FSC 4730 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS24587E 2 Dash number Hos
3、e ID (ref) inches (mm) Tubing OD (ref) inches (mm) Nipple PIN (see note 6) MS24588Socket PIN MS24590Nut PIN AN818 A (max) inches (mm) B inches (mm) -3 (see note 5).125 (3.18) .188 (4.78) -3 -3 -3 1.68 (42.67) .320 (8.13) .016 (.41) -4 .188 (4.78) .250 (6.35) -4 -4 -4 1.80 (45.72) -5 .250 (6.35) .313
4、 (7.95) -5 -5 -5 1.96 (49.78) -6 .313 (7.95) .375 (9.53) -6 -6 -6 2.10 (53.34) .375 (9.53) .030 (.76) -8 .406 (10.31) .500 (12.70) -8 -8 -8D 2.58 (65.53) .438 (11.13) .030 (.76) -10 .500 (12.70) .625 (15.88) -10 -10 -10D 2.85 (72.39) .515 (13.08) .030 (.76) -12 .625 (15.88) .750 (19.05) -12 -12 -12D
5、 3.20 (81.28) .562 (14.27) .030 (.76) MS24589 MS24591 -16 .875 (22.23) 1.000 (25.40) -16 -16 -16D 2.87 (72.90) -20 1.125 (28.58) 1.250 (31.75) -20 -20 -20D 3.05 (77.47) .620 (15.75) .030 (.76) -24 1.375 (34.93) 1.500 (38.10) -24 -24 -24D 3.34 (84.84) .765 (19.43) .030 (.76) -32 1.813 (46.05) 2.000 (
6、50.80) -32 -32 -32D 4.08 (103.63) .937 (23.80) .030 (.76) NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Unless otherwise specified, tolerances are as follows: Angles 1; decimals .005 inch (0.13 mm). 4. Nut must swivel freely after assembly. 5. Size -3 s
7、hall not be used in hydraulic applications. 6. Part or Identifying Number (PIN). FIGURE 1. Straight adapter dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS24587E 3 REQUIREMENTS: Dimensions and configuratio
8、ns: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-5070 and figure 1 in case of conflict between this drawing and MIL-DTL-5070, this drawing shall govern. Intended use: This assembly is designed for use only with hose in accordance with MIL-DTL-8794. Materials:
9、 Materials shall be in accordance with MIL-DTL-5070. Finish: Finish shall be in accordance with MIL-DTL-5070. Color identification: Color identification shall be accordance with MIL-DTL-5070. PIN example: MS 24587 -3 CZ Code for material/finish (see table I) Dash number on figure 1 Basic specificati
10、on number MS prefix TABLE I. Code for material and finish. Code Dash size Material/finish CC -3 thru -6 Carbon Steel cadmium plating CZ -3 thru -6 Carbon steel zinc plating SS -3 through -6 Corrosion resistant steel - N/A AA -8 through -32 Aluminum anodic coating TA -3 through -32 Titanium - Anodize
11、d or fluoride phosphated. To the users of this document, it is recommended that the use of carbon steel material with cadmium plating be used only when the other materials and finishes specified in this document cannot meet performance requirements. Identification of product. The PIN and the manufac
12、turers Commercial and Government Entity (CAGE) Code or trademark shall be marked on a removable tag securely attached to the assembly. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the change
13、s. Referenced documents. In addition to MIL-DTL-5070, this document references the following: AN818 MS24588 MS24589 MS24590 MS24591 MIL-DTL-8794 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS24587E 4 CONCLUDING MATERIAL Custodians: Preparing acti
14、vity: Army - AT DLA - CC Navy - AS Air Force - 99 (Project 4730-2005-037) DLA - CC Review activities: Army - AV Navy - SA Air Force - 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
