1、INCH-POUNDMS24698A 14 July 2005 SUPERSEDING MS24698 13 October 1960 DETAIL SPECIFICATION SHEET RETAINER, CONNECTOR, RACK AND PANEL, MINIATURE Inactive for new design after 8 June 1999. This specification is approved for use by all Departments and Agencies of the Department of Defense. The requiremen
2、ts for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-26518. The Qualified Products List (QPL) associated with this inactive for new design specification will be maintained until acquisition of the product is no longer required, where upon the specificat
3、ion and QPL will be canceled. NOTES: 1. All dimensions in inches. 2. Metric equivalents are given for general information only. 3. Unless otherwise specified tolerances are +.003 -.000 inches (0.08 mm). All diameters shall be concentric within .002 inches (0.05 mm) T.I.R (total Indicated runout). FI
4、GURE 1. Spring loaded mounting assembly. AMSC N/A Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Inches mm .005 .015 .099 .103 .123 .128 .173 .177 .182 .193 .207 .211 .334 .340 .370 .380 0.13 0.38 2.51 2.61 3.12 3.25 4.39 4.50 4.62 4.90 5.26 5.36 8.
5、48 8.64 9.40 9.65 FSC 5935 MS24698A 2 REQUIREMENTS: Dimensions and configuration see figure 1. Material: Stainless steel type 303 in accordance with ASTM A582 UNS designator 530300. Part or identifying number (PIN): MS24698-1 Referenced documents: In addition to MIL-DTL-26518 this document reference
6、s the following: ASTM A582 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. CONCLUDING MATERIAL Custodians: Preparing activity: Air Force - 11 DLA - CC DLA - CC (Project 5935-4699-00
7、0) Review activities: DLA - IS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
