1、INCH-POUNDMS24699B 14 July 2005 SUPERSEDING MS24699A 11 January 1961 DETAIL SPECIFICATION SHEET SHAFT, CONNECTOR, RACK AND PANEL, MINIATURE Inactive for new design after 8 June 1999. This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements
2、 for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-26518. The Qualified Products List (QPL) associated with this inactive for new design specification will be maintained until acquisition of the product is no longer required, where upon the specificatio
3、n and QPL will be canceled. Inches mm .016 .020 0.41 0.51 REMOVE ALL BURRS NOTES: 1. All dimensions in inches. 2. Metric equivalents are given for general information only. 3. Unless otherwise specified tolerances are .005 inches (0.13 mm) and angles 5. All diameters shall be concentric within .002
4、inches (0.05 mm) T.I.R (total Indicated runout). FIGURE 1. Spring loaded mounting assembly. AMSC N/A Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-.025 .062 0.64 1.57 .065 .138 .148 .166 .170 .207 .211 .400 .420 .510 .742 .748 .821 1.65 3.51 3.76 4
5、.22 4.32 5.26 5.36 10.16 10.67 12.95 18.85 19.00 20.85 FSC 5935 MS24699B 2 REQUIREMENTS: Dimensions and configuration see figure 1. Material: Stainless steel type 303 in accordance with ASTM A582 UNS designator 530300. Part or identifying number (PIN): (Note: This standard is not to be procured sepa
6、rately.) MS24699-1 Referenced documents: In addition to MIL-DTL-26518 this document references the following: FED-STD H28 ASTM A582 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. C
7、ONCLUDING MATERIAL Custodians: Preparing activity: Air Force - 11 DLA - CC DLA - CC (Project 5935-4701-000) Review activities: DLA - IS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
