1、AMSC N/A FSC 5985 INCH-POUND MS25058C 21 June 2013 SUPERSEDING MS25058B 9 November 2007 DETAIL SPECIFICATION SHEET TAKEUP, TENSION, ANTENNA This specification sheet is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described
2、herein shall consist of this specification sheet and MIL-DTL-7965. NOTE: Detent must be provided to hold locking ring in forward position against windows: 3 pounds, maximum 10 pounds disengaging force. MS PIN MS25058-1 FIGURE 1. Dimensions and configuration. NOTES: 1. Unless otherwise specified, dim
3、ensions are in inches: One place decimal .1, two place decimals .02. 2. Millimeters are for information only. 3. Remove all burrs and sharp edges. INACTIVE FOR NEW DESIGN AFTER 4 JUNE 1999. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS25058C 2 R
4、EQUIREMENTS: Material: Swivel: .06 inch thick stainless steel, in accordance with SAE-AMS documents 5902, 5517, 5518, 5519 and ASTM-A666. Material for socket and tension takeup body shall be corrosion resistant steel. The socket is made from stainless steel in accordance with ASTM-A276. The tension
5、takeup body is made from stainless steel tube in accordance with ASTM-A269. The ball is made from stainless steel in accordance with ASTM-A276. The ball is to be coated with appropriate surface lubricant. Threads: Shall conform to MIL-S-7742. Maximum weight: 0.26 pound. Acquisition document: MIL-DTL
6、-7965. This specification sheet takes precedence over documents referenced herein. Referenced documents. In addition to MIL-DTL-7965, this document references the following: ASTM-A269 MS25061 ASTM-A276 SAE-AMS-5517 ASTM-A666 SAE-AMS-5518 MIL-S-7742 SAE-AMS-5519 MS25057 SAE-AMS-5902 Marginal notation
7、s are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity: Navy - AS DLA- CC Air Force - 85 DLA - CC (Project 5985-2013-028) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
