1、AMSC N/A FSC 5985 MS25061B 14 July 2009 SUPERSEDING MS25061A 18 June 1976 DETAIL SPECIFICATION SHEET SLEEVE, SUPPORT, ANTENNA, INTERNAL THREAD This specification is approved for use by all Depart- ments and Agencies of the Department of Defense. The complete requirements for acquiring the switch des
2、cribed herein shall consist of this specification and the latest issue of MIL-DTL-7965. NOTES: 1. Material: Dielectric, Suitable for the purpose. 2. Dimensions are in inches. 3. Unless otherwise specified, tolerances: One place decimals .1, two place decimals .02, three place decimals .005. 4. Threa
3、ds shall conform to MIL-S-7742. 5. Maximum weight .03 pounds. INCH-POUND Inactive for new design after 4 June 1999 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS25061B 2MS Part NO. MS25061-1 FIGURE 1 Dimensions and configuration Ltr Dimensions Lt
4、r Dimensions A 5.070 +.500 - .062 G .25 B 2.8 H .4 C 1.7 I .62 D .43 .02 J .06 E .197 K .04 F .190 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS25061B 3Referenced documents. In addition to MIL-DTL-7965, this document references the following: MI
5、L-S-7742 Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity Navy AS DLA -CC Air Force 85 DLA CC (Project 5985-2009-022) Review activities: Navy MC Air Force 99 NOTE: The activities l
6、isted above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
