1、MS27146C 17 June 2003 SUPERSEDING MS27146B 14 April 1989 DETAIL SPECIFICATION SHEET CONNECTOR, RECEPTACLE, ELECTRICAL, DOUBLE CONTACT, WATERPROOF This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described
2、herein shall consist of this specification. FIGURE 1. Configuration and dimensions. AMSC N/A 1 of 3 FSC 5935 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-M
3、S27146C 2 Inches mm Inches mm Inches mm .002 .043 .050 .060 .065 .075 .118 .120 .051 .76 1.27 1.52 1.65 1.90 3.00 3.05 .137 .150 .157 .187 .218 .250 .271 .344 3.48 3.81 3.99 4.75 5.08 6.35 6.89 8.74 .437 .620 .795 .825 .875 1.095 11.10 15.75 20.19 20.96 11.23 27.81 FIGURE 1. Configuration and dimens
4、ions - Continued. REQUIREMENTS: Material: Shell: Rubber in accordance with ASTM D2000, M3BC610A14C12EO34F19. Terminal: Brass composition, temper half hard minimum in accordance with ASTM B 36/B 36M, ASTM B 121/B 121M or ASTM B124/B 124M. Terminal protective finish: Silver plate, grade D, class S, .0
5、002-inch minimum thickness in accordance with ASTM B700. When connectors are coupled, the following requirements shall apply: Voltage drop: The voltage drop shall not exceed 20 millivolts and shall meet the requirements outlined in MIL-STD-202, method 307. Dielectric strength: The assembly shall wit
6、hstand dielectric strength test of 1000 volts, and meet the requirements outlined in MIL-STD-202, method 302. Waterproof requirements: The assembly shall be waterproof. Refer to MIL-HDBK-1184, or equivalent, for guidance on waterproof testing. Salt spray corrosion test: The assembly shall meet the r
7、equirements of salt spray corrosion test outlined in MIL-STD-202, method 101 (5% saline solution, 200 hours duration). Mating connector: See MS27145. Part or Identifying Number (PIN): MS27146-1. Engineering parts list may be obtained from the U.S. Army Tank Automotive Command, Warren, MI 48397-5000.
8、 (Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27146C 3 CONCLUDING MATERIAL Custodians: Preparing activity: Army AT DLA - CC Air Force 99 Navy - MC (Project 5935-4427-005) DLA - CC Review activities: Army AR, CR, CR4, GL Navy YD Air Force - 11 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
