1、AMSC N/A FSC 5935 MS27267A 21 February 2013 SUPERSEDING MS27267 (USAF) 7 October 1963 DETAIL SPECIFICATION SHEET SHELL, ELECTRICAL CONNECTOR RAMP POWER, 416/240 VOLTS This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring t
2、he product described herein shall consist of this specification sheet and MIL-DTL-38159. FIGURE 1. Shell, electrical connector ramp power, 416/240 volts. INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27267A 2 Inches mm Inches mm Inches
3、 mm .063 1.60 2.125 53.98 3.359 85.32 .125 3.18 2.405 61.09 3.563 90.50 .156 3.96 2.656 67.46 3.906 99.21 .281 7.14 2.813 71.45 4.375 111.13 .375 9.53 3.125 79.38 5.813 147.65 .531 13.49 3.218 81.74 9.063 230.20 1.375 34.93 3.313 84.15 NOTES: 1. Material: In accordance with MIL-DTL-38159. 2. Remove
4、all sharp edges. 3. Dimension are in inches, metric equivalents are given for information only. FIGURE 1. Shell, electrical connector ramp power, 416/240 volts - Continued. Part or Identifying Number (PIN): MS27267-1 Changes from previous issues. Marginal notations are not used in this revision to i
5、dentify changes with respect to the previous issue due to the extent of the changes. Referenced documents. This document references MIL-DTL-38159. CONCLUDING MATERIAL Custodians: Preparing activity: Air Force - 85 DLA - CC DLA - CC (Project 5935-2012-236) NOTE: The activities listed above were inter
6、ested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
