1、 DETAIL SPECIFICATION SHEET CONNECTOR, RECEPTACLE, ELECTRICAL, BOX MOUNTING, SOLDER TYPE, HERMETIC SEAL, SERIES II This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this sp
2、ecification sheet and MIL-DTL-38999. FIGURE 1. Receptacle, class Y. AMSC N/A FSC 5935 MS27476G 13 April 2012 SUPERSEDING MS27476F 12 July 2002 INCH-POUND Reactivated after 24 May 2004 and may be used for new and existing designs and acquisitions. Provided by IHSNot for ResaleNo reproduction or netwo
3、rking permitted without license from IHS-,-,-MS27476G 2 Shell size LP max LS max Q max dia R BSC S max T +.010 -.005 V dia +.001 -.005 8 .453 .562 1.078 .297 .828 .120 .562 10 1.266 .3595 .954 .672 12 1.391 .406 1.047 .781 14 1.516 .453 1.141 .906 16 1.641 .4845 1.234 1.031 18 1.766 .531 1.328 1.156
4、 20 1.891 .578 1.453 1.250 22 2.016 .625 1.578 1.375 24 .484 .594 2.204 .6875 1.703 .147 1.500 FIGURE 1. Receptacle, class Y Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27476G 3 Inches mm Inches mm Inches mm Inches mm .005 0.13 .317
5、8.05 .754 19.15 1.328 33.73 .007 0.18 .344 8.74 .781 19.84 1.355 34.42 .008 0.20 .3595 9.13 .828 21.03 1.375 34.93 .010 0.25 .403 10.24 .879 22.33 1.391 35.33 .011 0.28 .406 10.31 .906 23.01 1.453 36.91 .012 0.30 .438 11.13 .954 24.23 1.500 38.10 .015 0.38 .453 11.51 .980 24.89 1.516 38.51 .028 0.71
6、 .484 12.29 1.031 26.19 1.578 40.08 .053 1.34 .4845 12.31 1.047 26.59 1.641 41.68 .058 1.47 .515 13.08 1.078 27.38 1.703 43.26 .078 1.98 .531 13.49 1.105 28.07 1.766 44.86 .116 2.95 .562 14.27 1.141 28.98 1.891 48.03 .120 3.05 .578 14.68 1.156 29.36 2.016 51.21 .139 3.53 .594 15.09 1.230 31.24 2.204
7、 55.98 .147 3.73 .625 15.88 1.234 31.34 .223 5.66 .629 15.98 1.250 31.75 .238 6.05 .672 17.07 1.266 32.16 .297 1.54 .6875 17.46 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. For main keyway and keyway positions, see MIL-DTL-38999. 4. The gauge features
8、for GG shall be .004 (0.10 mm) smaller than MMC size at basic location. FIGURE 1. Receptacle, class Y Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27476G 4 REQUIREMENTS: Dimensions and configuration: See figure 1. Interface dimensions
9、 shall conform to MIL-DTL-38999. This receptacle mates with MS27473, MS27480, MS27484 and MS27500. Insert arrangements: See MIL-STD-1560. Part or Identifying Number (PIN) example: MS27476 Y 24 D 61 P A MS number Class Shell size Finish Insert arrangement Contact style Polarizing positions (No letter
10、 is required for normal) Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes. Referenced documents. In addition to MIL-DTL-38999, this document references the following: MIL-STD-1560 MS
11、27473 MS27480 MS27484 MS27500 CONCLUDING MATERIAL Custodians: Preparing activity: Army CR DLA CC Navy AS Air Force - 85 (Project: 5935-2012-036) DLA CC Review activities: Army MI Navy EC, MC, OS Air Force 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
