1、 INCH-POUNDMS27499J 24 November 2008 SUPERSEDING MS27499H 12 July 2002DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, BOX MOUNTING FLANGE, CRIMP TYPE, BAYONET COUPLING, SERIES II Reactivated after 24 May 2004 and may be used for new and existing designs and acquisitions.This specifica
2、tion is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-38999. FIGURE 1. Receptacle, class E. AMSC N/A FSC 5935 Provided by IHSNot for ResaleNo reproductio
3、n or networking permitted without license from IHS-,-,-MS27499J Shell size L max M max R BSC S max T +.010 -.005 8 .453 .297 .828 10 .578 .3595 .954 12 .703 .406 1.047 14 .828 .453 1.141 16 .953 .4845 1.234 18 1.062 .531 1.328 20 1.188 .578 1.453 22 1.312 .625 1.578 .120 24 .312 1.438 .6875 1.703 .1
4、47 FIGURE 1. Receptacle, class E Continued. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27499J Inches mm Inches mm Inches mm Inches mm .005 0.13 .147 3.73 .6875 17.45 1.328 33.73 .007 0.18 .223 5.66 .703 17.85 1.391 35.33 .008 0.20 .266 6.76
5、.828 21.03 1.438 36.53 .010 0.25 .297 7.54 .953 24.21 1.453 36.91 .011 0.28 .312 7.92 .954 24.23 1.516 38.51 .012 0.30 .322 8.18 1.047 26.59 1.578 40.08 .015 0.38 .3595 9.13 1.062 26.97 1.641 41.68 .036 0.91 .406 10.31 1.078 27.38 1.703 43.26 .058 1.47 .453 11.51 1.141 28.98 1.766 44.86 .06 1.5 .484
6、5 12.31 1.188 30.18 1.891 48.03 .120 3.05 .531 13.49 1.234 31.34 2.016 51.21 .123 3.12 .578 14.68 1.266 32.16 2.204 55.98 .139 3.53 .625 15.88 1.312 33.32 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. For main key and key positions, see MIL-DTL-
7、38999. 4. The gauge feature for GG shall be .010 inch (0.25 mm) smaller than the MMC size at base location. 5. Dimensioning and tolerances are in accordance with ASME-Y14.5M. FIGURE 1. Receptacle, class E Continued. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without licen
8、se from IHS-,-,-MS27499J REQUIREMENTS: Dimensions and configurations: See figure 1. Interface dimensions shall conform to MIL-DTL-38999. This receptacle mates with MS27473, MS27480, MS27484 and MS27500. Procurement Specification: MIL-DTL-38999. Insert arrangements: See MIL-STD-1560. Part or Identify
9、ing Number (PIN) example: MS27499 E 24 B 61 P AMS number Class Shell size Finish Insert arrangement Contact style Polarizing positions no letter is required for normal. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issu
10、e due to the extent of the changes. Referenced documents. In addition to MIL-DTL-38999, this document references the following: MS27473 MS27480 MS27484 MS27500 MIL-STD-1560 ASME-Y14.5M 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27499J CONCLU
11、DING MATERIAL Custodians: Preparing activity: Army CR DLA CC Navy AS Air Force 85 (Project 59352008-049) DLA CC Review activities: Army AR, MI Navy EC, MC, OS Air Force 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
