1、 DETAIL SPECIFICATION SHEET SUPPORT, CABLE, RIGHT ANGLE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-26500. FIGURE 1. Dimensions a
2、nd configuration. AMSC N/A FSC 5935 MS27559E 14 August 2009 SUPERSEDING MS27559D 6 February 2004 Inactive for new design after 14 November 1977. INCH-POUNDProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27559E 2MS Part or Identifying Number (PIN) S
3、ize A dia B dia max C dia max D thread UNEF-2B MS27559-1 8 .348 .532 .672 .4375-28 MS27559-2 10 .440 .657 .797 .5625-24 MS27559-3 12 .600 .845 1.016 .750-20 MS27559-4 14 .684 .907 1.110 .8125.20 MS27559-5 16 .789 1.032 1.234 .9375-20 MS27559-6 18 .922 1.157 1.360 1.0625-18 MS27559-7 20 1.053 1.282 1
4、485 1.1875-18 MS27559-8 22 1.172 1.407 1.610 1.3125-18 MS27559-9 24 1.302 1.532 1.735 1.4375-18 MS PIN E max F max G max H max J dia max MS27559-1 1.200 .602 .892 .201 .245 MS27559-2 1.320 .650 1.072 .328 .370 MS27559-3 1.320 .740 1.072 .388 .370 MS27559-4 1.487 .775 1.108 .452 .520 MS27559-5 1.470
5、 .830 1.108 .508 .520 MS27559-6 1.588 .897 1.233 .571 .645 MS27559-7 1.759 .955 1.477 .748 .780 MS27559-8 1.759 1.015 1.477 .748 .780 MS27559-9 2.027 1.077 1.727 .996 1.065 FIGURE 1. Dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted withou
6、t license from IHS-,-,-MS27559E 3Inches mm Inches mm Inches mm Inches mm Inches mm .010 .25 .520 13.21 .789 20.04 1.065 27.05 1.360 34.54 .032 .81 .532 13.51 .797 20.24 1.072 27.23 1.407 35.74 .035 .89 .571 14.50 .830 21.08 1.077 27.36 1.443 36.65 .042 1.07 .600 15.24 .845 21.46 1.108 28.14 1.460 37
7、08 .201 5.11 .602 15.29 .892 22.66 1.110 28.19 1.477 37.52 .245 6.22 .645 16.38 .897 22.78 1.157 29.39 1.485 37.72 .262 6.65 .650 16.51 .907 23.04 1.172 29.77 1.532 38.91 .328 8.33 .657 16.69 .922 23.42 1.173 29.79 1.561 39.65 .335 8.51 .672 17.07 .955 24.26 1.233 31.32 1.610 40.89 .348 8.84 .684 1
8、7.37 .996 25.30 1.234 31.34 1.727 43.87 .370 9.40 .740 18.80 1.015 25.78 1.282 32.56 1.732 43.99 .440 11.18 .748 19.00 1.016 25.81 1.293 32.84 1.735 44.07 .452 11.48 .775 19.68 1.032 26.21 1.302 33.07 2.000 50.80 .508 12.90 .780 19.81 1.053 26.75 NOTES: 1. Dimensions are in inches. 2. Metric equival
9、ents are given for information only. 3. Unless otherwise specified, tolerances are .010. FIGURE 1. Dimensions and configuration Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27559E 4REQUIREMENTS Dimensions and construction: Dimensions
10、and configuration: See figure 1. Coupling nut securely captivated to cable support and has provisions for locking in an indexed position. Materials and finishes: Aluminum components anodized in accordance with MIL-A-8625 or suitable hard anodizing process to meet the performance requirements of MIL-
11、DTL-26500. Cable support material: Aluminum alloy in accordance with ASTM-B26/B26M, composition 13, A13, A380, or 380. Coupling nut material: Aluminum alloy in accordance with ASTM-B211 or SAE-AMS-QQ-A-367. Threads shall be in accordance with MIL-S-7742. PIN: MS27559- (see figure 1 for dash numbers)
12、 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-26500, this document references the following: ASTM-B26/B26M ASTM-B211 MIL-A-8625 MIL-
13、S-7742 SAE-AMS-QQ-A-367 NASM35275 NASM35338 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27559E 5CONCLUDING MATERIAL Custodians: Preparing activity: Air Force 85 DLA CC DLA CC Review activity: (Project 5935-2009-124) Air Force 99 NOTE: The activ
14、ities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
